Vamos familia, aquí os traigo la sexta semana y primera de floración de estas Royal Gorilla de RoyalQueenSeeds. Vaya color, y van con buen ritmo. La temperatura maxima es de 26.5 y la Mínima se queda en 23.5. En cuanto a la humedad está estable en 50% Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨

Buds von Pheno #1 (Tribute•D•Cut) mein absoluter Favorit wenns um die reinen Blüten geht haptik terps appeal 1a ! Folgen in kürze,in ein paar Tagen wenn sie ca 20 Tage curen konnte,werde ich ein paar meiner Favorit Buds von dem cut hochladen! Ich brauch viel mehr Platz Grow diaries um die schönsten hochzuladen 🤣🤣🤣

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

12/21 - Transplanting into a 7 gallon pot (coco/per) - increasing feeds starting tomorrow - swapped lights running the Marshydro 150W full spec - Did some light defoliation 😎😎😎😎😎

Erntezeit! Getrocknet wurde 9 Tage bei ~55% Luftfeuchtigkeit und 20 grad. Trocken getrimmt. Alle Popcorn nugs und Verschnitt zu Hash weiterverarbeitet.

Hey Growers! The girls have officially packed their bags and moved into a much fancier place. The new setup comes loaded with perks: an automated controller that keeps the environment dialed in 24/7, managing every device so the VPD stays exactly where it should be (because apparently plants are picky like that). Drainage? Automated. Irrigation? Also automated. Basically, the grow room is now smarter than most of us on a Monday morning. Thanks to multi-frequency fertirrigation, the girls are getting up to 6 daily watering cycles, keeping the substrate pH stable and nutrient-ready at all times. Less babysitting for me, more thriving for them: a deal I'm very happy to sign. Now, onto the Mental Rainbows, and things are finally looking up. After slightly bumping up the Calmag base to 0.6 EC and doubling the daily watering frequency, something seems to have clicked. The new growth is no longer twisted and curled, and honestly, that's enough to give me hope. Now that I'm pushing irrigation up to 6 times a day, I can only expect things to keep improving. A few of the smaller, slimmer plants don't seem to have developed a main cola: their internodes are all growing at roughly the same pace. So while I'll be topping the bigger, more advanced girls that do have a clear main shoot, I might skip the topping on the slimmer ones and let them take their time catching up in height instead. No point rushing what doesn't need rushing. That said, even though these plants had a bit of a rocky start (likely due to a slightly more delicate genetics), I'm still very confident in them. As proven in my last run, plants that struggled early on ended up delivering even better results than the ones that looked bulletproof from day one. So, as they say: never judge a book by its cover, or in this case, by its baby seedling! 🌱 Tips, tricks, and roasts are always welcome. Happy growing everyone!

So I'm seeing some yellow tips, also on the new growth and I'm a little surprised because I'm not feeding that much tbh...at least I think I'm not.... reading up a bit, not sure if its nute burn or something else... got some cal-mag anyway , seeing i'll need it soon.. Tthe Northern Lights is going up like crazy! it has a completely different 'build' to it, much wider and distances then the more compact Diesel. Held off on the feeding, just distilled water ...but maybe 'll just switch to tap water, leaving it outside for a night or two...no more root booster....seems a little redundant.

last 3 days no watering and last 48 no light. drying conditions are RH 50% and temp 14°C.

Hello Growmies, Week 3 for our Watermelon Candy by Zamnesia is unfolding with promise as we observe their transition through pre-flower. Opting for low-stress training over topping, we're guiding their growth gently to maximize their potential. The plants have gracefully reached our SCROG, and with two already skillfully trained, they are demonstrating adaptability and robustness. Through the canopy, we see an even spread of foliage, indicating that our LST approach is on point. The structure of the plants is sturdy, showing that the careful maneuvering through the SCROG mesh has been well received. The greenery is lush, leaves are perked up, reaching for the light—signs that our Watermelon Candy plants are in their element and thriving. Our environmental management has mirrored the successful strategies implemented with our Epic Buzz and Red Banana Pudding strains. Daytime conditions are meticulously controlled, with the Tent-X system maintaining VPD within the ideal range for healthy plant activity. However, as we've noted with our other strains, our nighttime VPD control presents a challenge. The data indicate a discrepancy in maintaining optimal humidity levels when the lights are off, suggesting that our current setup is not fully regulating the environment during these crucial hours. The intention to integrate the Smart Mars Hydro fan into the Tent-X system is a move towards rectifying this issue, with the aim to achieve a seamless 24-hour environmental control. The transition to this enhanced system will ensure that our Watermelon Candy plants receive the same level of consistent care throughout their entire growth cycle. Their current robust state and the proactive steps we are taking to fine-tune their environment have set a strong foundation for the weeks to come. We will continue to monitor their progress closely, making adjustments where necessary, and anticipating a bountiful flowering stage ahead. Stay lifted, salokin

Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now about 3 weeks into flower, and the stretch has just finished. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I did start to add a PK booster this week pushing the EC up to 1.4. I also will be switched the light from V1 to the F1 Spectrum at the beginning of this week, and will be integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The tallest plants are the Sundae Driver and the Durban Nights at 42" and the Red Hot Cookies is the shortest plant at 38" however they all look happy and healthy and capable of easily giving up a half pound each. The 5X5 is really starting to fill up nicely, I am running two dehumidifiers outside of the tent and I am able to maintain around 50% RH in the tent during lights on, and around 55% RH with lights off. We did get an unexpected heat wave this weekend and it has been a struggle keeping the heat and humidity down but the flowers are just starting so no need to worry about mold or anything like that yet. As soon as this heat wave is over the temps should be good to go the rest of the way this is by far the best time of year to be flowering plants in my region. I did defoliate twice this week and I may do one or two more rounds before just letting them do their thing. Not much to do from here on out except make sure the reservoir is full and the PH is in the proper range. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Added an humidifier to keep a constant humidity level of 55% in the grow room. The temperature just outside the grow room is 10C, and even more outside is 0C!! It's a miracle I can keep a temperature over 20C inside the room ;) UPDATE: TOPPED! A nice cut just over the 3rd node. She’s still kinda small and fat, and this is because of the light that was too close to the plant last week. Now she’s 60cm far away from that. Because of the top, I gave her 2ml of Voodoo Juice to help her radicate a little bit more. Let’s see what happens!

I cannot believe how much growth this week!!! I think she has doubled in size!! For the first time I've had to higher the light fixture. It is now almost as high as I can put it. I'm kinda regretting not FIMing her now...... I hope she does not grow much more in height!

💜PINK RUNTZ 💜

Next few days I'm going to flip to Veg nutrients. Any idea what ppm I should bring her up to

Day 1 of the 4th week in flowering time to start pk 13 14. So far had spray neem oil 2x a week at night and happy with results plants looks enjoy the plagron nutrients and our sun.

Top row, left to right: Radical Juice, Mona Lisa, Challah Cake Bottom row, left to right: Sexbud, Blueberry Muffin, SAD Afgani The plants are still stretching quite a bit right now, with some of them naturally more than others. So we placed something under the smaller plants to ensure they all receive the same amount of light. Day 33: First fertilization: EC 1.1, ~60 mg/L nitrogen. Purpose: Mild feeding to observe plant reactions. Day 35+: Observation: Slight interveinal chlorosis (yellowing between leaf veins). Response: Added 0.25g of Epsom salt per liter of water. Change: Epsom salt now added with every watering. Day 36: Light fertilization again: EC 1.2, 77 mg/L nitrogen. Adjustment reason: Increased nitrogen as lower leaves started yellowing due to small (1L) containers. Plant Note: SexBud Issue: Developed male pollen sacs again, as in the previous grow. Action: Pollen sacs were removed; the plant will be monitored. Next Step: If more male flowers appear, the plant will be removed.

420 Fastbuds Week 5 Blackberry Auto What up what up. Weekly updates on these two magnificent girls. They both are showing some really cool colors not only on the flowers but leafs as well. It's been getting cold a few day this week so possibly temperature manipulation. Both seem to be happy and healthy up to this point so continuing with the same routine should work fine. I think I'll add some nutes this coming week to boost flower production and give them a little helping hand. All in all Happy Growing