Processing
Likes
Comments
Share
Esa familia, actualizamos las northern light xL, hay una de las 3 que destaca del resto por tamaño y flores, pintan muy bien, se ve buen color y bastante vigorosas, tutelamos 1. Bajamos humedad y temperatura, a estas alturas estamos pensando en el siguiente proyecto con varias geneticas de zambezaseeds.
Likes
24
Share
***** Week 11 growth - February 13 to 19, 2021 - Week 2 Flower ***** This girl is looking very nice but she is the shortest of the bunch. She has not growing out as wide and tall as the other girls in the tent but that could have changed with an extra week of Veg. 8 weeks from seed was quite quick to throw a girl into flower so it’s all good.....just noting it👍😃 2nd SCROG layer in now....finally😞 Lots of work to do in cleaning up the lower leaves next week. Will do larger leaf strip and lolipoping when they start focusing more on bud development. Light is at 24” only pulling 310 watt, and the meter at the tops of the girls is roughly 28,500LUX. It is feeling like it’s a little strong for them but it’s close......the curling leaves is slowly increasing on the tops. By the end of the week we are at 400watts and reading 38,500LUX, this should be roughly 980 umol/s/m2.......over 900 and less than 1,000.......should be good for going into week 3. Nutrients switched over to flower schedule and following week 2.....but so-called back a couple of items. Adding some other items beyond IPP line so backing off some of the ppm to compensate. Still only one “feeding” per week. Early flower so hitting the microbes a little harder this week and next and then slowly start backing off. I like Remo’s Natures Candy for sweetener because it has humic, sweetener and old school molasses, amongst other things to feed the microbes as they are in coco. Bud Fusion being used now for pk boost.........no more “red kool-aid”😂 Still adding Rezin from Green Planet becuase it seems to boost my trichome quantity.....Terpinator likely this week as well......increase some of the sulfer to increase aromas. Little more detail....... Feb 13/21 - Day 8 - 3.5L watering with CalMag @ 1ml, Nature’s Candy @ 1ml, Resin @ 1.5ml Feb 14/21 - Day 9 - 2nd SCROG added today.....finally. Plucked a bunch more leaves in the process - watering with microbes only today. Recharge has some molasses in it so just adding that. - 4L water for these girls with Recharge @ 1/2 tsp/gal - 320ppm and 6.0pH Feb 15/21 - Day 10 - today is big feed day....its been 7 days. - 3L each girl with all the IPP line as listed plus silica @ 1ml, Nature’s Candy @ 1ml. (Bud Fusion was 0.2gr/L) - 1325ppm and 6.0pH - Girls gave run off at 3L today so didn’t push past that. Feb 16/21 - Day 11 - some feed left from yesterday so added 6L of plain water to dilute it and watered into the girls tonight. - 3L full feed of nutrients for each girl - 800ppm and 6.1pH Feb 17/21 - Day 12 - 3L each girl with Terpinator and CalMag @ 2ml, Nature’s Candy @ 1ml, Recharge @ 1/2 tsp/gal - 775ppm and 6.1pH - increased light power to 350 watts. Now at 32,500LUX.......take it slow over the next week and keep creeping up. Leaves have a bit of a taco shape coming out and looking fairly serrated at the edges.....pushing the light intensity on the tops👍 - leaf colour on the girls is very good......tips are not burnt either. Feb 18/21 - Day 13 -3L each girl of plain water today - added beneficial bacteria and enzymes @ 1.5ml - 330ppm and 5.9pH - was looking for a little lower pH as I have not been checking runoff. - have to do a leaf strip this weekend......start of week 3. - light power increased again, 400 watts now. Feb 19/21 - Day 14 - day out day.......they have not had one in a bit. - humidity was higher today as door to grow room closed today to assist clones with more humidity. So that takes us through two weeks of flower now. Not knowing this strain enough yet, I suspect feeding will stop at the end of week 6. That leaves four more weeks. I will treat the next two weeks like mid flower for nutes, and the following two weeks as late flower. Feed supplements accordingly. She is a nice plant and looking forward to seeing how her buds form. Looking good ETS!
Likes
Comments
Share
Straight pk the rest of the way, she's greeeen.
Likes
3
Share
They completed second week of flowering. They keep on happily stretching and groing beautiful colas. To avoid further stretch and increase DLI, I am dialing in to level 9 on my lamp and keeping it still at 60 cm distance. This week, I will just leave the lamp at the same height and let them decide how close they want to come the light source. Humidity is fluctuating between 52-55%.. Temp is 22-26 Celsius. VPD is relatively constant around 1.40s except for very rainy days where my dehumidifier comes into play. PPFD is increased to ~1050 uMol this week. If they don’t like it, I will just dial back to level 8.
Likes
9
Share
@auto420
Follow
Gelisimleri gayet guzel ph ayarli su ile 0.75lt su ile herbiri sulandi
Likes
7
Share
Gute Woche für die Photos, durchwachsen für die Autos. Die ak haben wieder eine Blattläuse Attacke erlebt. Habe die lästigen Dinger wieder manuell entfernt.Es läuft. Bis nächste Woche ✌️
Likes
28
Share
@Roberts
Follow
I had a little pH dip the other day and the leaves showed some magnesium deficiency. I am not super worried. These leaves are far from final ones. She has grown pretty well beside that pH issue. It should be solved now. I was feeding a little strong. I still kinda am. She is doing good under the G300W Spider Farmer light. I have it like 25 percent right now everything looks good now. Thank you Spider Farmer, and Amsterdam Marijuana Seeds. 🤜🤛💪🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash
Likes
22
Share
8/19/23 - Day 67 - Things are still looking good. We just had a water change. A couple more weeks! 8/21/23 - OK, ok ok, we have a lot of work coming up. Right now is like the calm before the storm. The storm I'm talking about is harvest, trimming, drying, and curing. This is the kind of labor that you LOVE to HATE. Especially with how many buds ill be pulling from this LEAF box. Let's talk about progress real fast. She is getting bulkier every day. Overnight she drank about 300+ ppm of nutes. She likes the nutes a lot. I'm taking this as a reason for all the little snowy crystals and the enlargement of the buds. Flushing: For about a week before harvest I will empty the water+Nutes and refill only with Water. We want the plant to suck up and replace all the nutes in the buds with water. This is called flushing. Trimming plans and Tools: When it's time to trim the plant, I've got a plan in mind. I'm going to trim the buds while they're still wet, and I'll leave them attached to the stems. To simplify the drying process, I will split the LEAF into two parts – the top and the bottom. Since space is a bit tight in the LEAF with this grow, I will keep just the buds on the branches. This will help the air circulate the buds better. I've even found this cool trimming tray on Amazon that I'm planning to use. I've realized that having the right tools for trimming is essential. Just like I'd put on gloves to work on a car, I will use nitrile gloves to keep things clean while trimming. And I'll use proper trimming scissors instead of regular ones. These scissors are designed for this job and should make the process much smoother. Amazon - Trimming Tray - (somewherr brand pictured above) Amazon - Nitrile Gloves Amazon - Trimming Scissors Drying Plans and Tools: Once I'm done trimming, it's time to dry the buds. I'm thinking of using simple tension rods, like those small shower curtain rods, to hang the branches. This way, I can create two levels inside the drying box. The lower part can rest on a SCROG net to ensure good airflow and even drying for all the branches. The LEAF box will handle the drying parameters. The environment inside the LEAF box will focus only on keeping the humidity at 60% and moving the air around getting the buds to a non-mildew amount of humidity. Amazon - Tension rods 16-28” Curing Plans and Tools After the buds are dry (60% humidity), the next step is curing. This means I'll be storing the buds in sealed glass jars. I've got mason jars and hygrometers to monitor humidity levels. Once the jars are filled with buds, I'll seal them and put them in an cool, dark spot. I plan to open the jars briefly every day to let in some fresh air. (15min). I'll know the curing is done when the humidity inside the jars stays around 62% during these "burps." That's when my perfectly cured buds will be ready to enjoy! Amazon - Hygrometer 12 Pack Target - 32oz Ball Mason Jars 12 Pack I use a smell-proof duffle bag. It has double zippers, and smell prof lining. The brand is www.420stock.com, and the model I use is the X-Large Trap Pax Duffle Bag. 8/23/23 - 20% more nutrients were added. She went from about 900 at the beginning of the week to about 330. Now she's back up to 500ppms. We change the water in one more day. 8/24/23 - Day 72 - It's official: I have moved the smell slider up! Holy shit, does it smell potent. I put my arm in there through the Weed forest, and when my arms came out, I was attacked by the Skunk BOSS. I had to shower and change my outfit to eliminate the smell. If you are looking for this experience, check out https://www.getleaf.co/
Processing
Likes
31
Share
I wasn't paying attention to the plant and she got a little dried out. I noticed that the lower leaves were stating to curls and She was just looking very unhealthy. I flushed the pot and defoliated all the growth below the top two nodes on each branch. gave her a couple days to recover from the defoliation and then added a feeding of nutrient solution. She has recovered nicely. However, there are some leaves that are still showing signs of damage but also improvement. That is the reason that this week is lacking in photos. I had to play doctor to the plant.
Likes
20
Share
@RunWithIt
Follow
I mean, overall this was an extremely painless grow. The test of whether we should or shouldn't top autos is still TBD imo. Our topped candidate produced denser, frostier buds, but weighed slightly less, at 14 grams of bud total. And our lst plant produced 18 grams of bud, not as frosty, and almost as dense as our topped girl. I'll be topping autoflowers from here on out only under the circumstance I have 4+ to grow at the same time. Seems like it could be used to speed up the autoflower grow cycle if done properly, like with right. Since I'm doing a perpetual cycle, it's still a viable option for me in the long run. A few tips I have for anyone growing this strain in organics: Start feeding bloom nutes a little bit prior to flower transition - this makes the transition more seemless. From weeks 1-3 flower, I slowly dropped the grow dosage until I cut off grow nutes week 3 flower. Starting the flush around week 6 flower seemed to really bring out this plant's potential. But I think you could get away with starting the flush around week 5. I hope this helps anyone trying this strain out. It's a good one, I hope to see more journals of it, eventually. Cheers everyone! Time for me to take a well-deserved puff. :) ☁️ 🌼
Likes
1
Share
Likes
22
Share
@NSCanna
Follow
Not much for feeding this week, accept for the Rezin and some blood meal since she's not as dark green as I would like. Nodes are looking okay so I'm leaving it at current light distance to keep them closer together. Did a large trim and another spray for thrips. Microbe populations are also looking good. Added supplemental CO2
Processing
Likes
7
Share
5x Diesel Berry Auto's, germinated in a glass tupperware container. Placed in wet toilet paper and sprinkled with Great White. Germination started Oct 10 09:00 Transplanted into seedling pots. Tap root rubbed in Great White, and sprinkled in pot before planted.
Likes
6
Share
@MistaOC
Follow
28.01. Day 36 Unfortunately, I had problems with the two front ones because I watered too much early on. lockout ——————————————————-
Likes
2
Share
@GuniGugu
Follow
- nutrient doses are the same as prescripted in BioBizz chart, but still, every second and a half watering is pure water - 52 Day cut some leaves in the middle to open some space for lower floors
Likes
10
Share
@Canadian
Follow
Today They have pop in my new room is completely ready for a New girls season I am going to use a rosin press for a large quantity off all the flowers That we produce And I will be reviewing that brand ones it arrive
Likes
36
Share
Hi everyone! Today i installed the first of two scrog nets. I think about 2 weeks of vegetation are enough for the rest to reach the hight. I watering them 2 or 3 times the week about 2 ½l clear water.