Hi Growmies, She is developing nicely and still in her flower stretch, she also became a bit thirstier than before. The rootball is still growing at d looking pretty healthy, only a bit of staining from the Rhizotonic. The feeding regimen has not changed since last week. The ppfd at the canopy is in the 600 range at the moment. Thanks for stepping by and hope to see you next week.

2/17/24 - Day 103 - The flush starts today! By Thursday I'll be giving her the chop. 2/19/24 - Day 105 - Flush is going well. Buds are still plumping up nicely. 2/21/24 - Day 107 - Ok this is the last day shes at the end of the Flush. Ill start a new week tomorrow, when I open the box up at 9am its chop time! I spent the day preparing, cleaning my workspace. Gathering all my tools, gloves, drying racks, etc. Here are the last pictures you guys are going to see of her growing. Enjoy!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 14 increased the light to 75% strech is slowing down tons of tops on yhe front plant very fast bug growth

I had to step her up to 13 l fabric pot. The roots had completely swallow last one. she's shaping up to become my favourite plant out of the current grow. I've got some leaf bleaching I thought could be mag or sulphur def but I'm sure it's light stress. I raised the light a little but but I can't raise it anymore. the only problem I had in this grow is that smell is faint but that's due to excessive heat. temps in my growspace get over 32c and never drop below 26 at a time where some cool weather is needed. I'm used to this at this time of the year, still can't afford ac or even dehumidifier right now. Coronas got my account all fucked up trying to pay these bills. maybe one day

Week 3 - Should see a lot of growth this week. Maybe try to train them a little this weekend. I kept the one girl a little too wet for a little too long and got some yellowing on the bottom leaves. Already starting to correct itself. I’ll give them a few days to dry out a little and adjust to their new digs then I’ll hit them with some nutrients… FoxFarms Dirty Dozen week 3 scheduled feeding at half strength. Day 17 - fed/watered 1/2gal per pot. Ph’ed @ 6.3 Day 19 - watered with carbon filtered tap water (forgot to ph. So ph was 6.9. The soil itself is pretty acidic, so the runoff ph still tested at 6.3. And we’re 12 hours in now with no adverse effects). Gave them about a gallon each (till I saw about 10% runoff). Day 20 - moved the lights from being hung directly from the tent frame to hanging on a hoist. This lowered them about 4”, which increased the temp to 82, so I turned on the exhaust fan to bring it back down to 77. In a small tent like this, atmosphere control is most of the work

Tag 31: Ich fange mit LST der Pflanze an. Noch etwas entlaubt und das scrog Netzteil eingebaut. Doch die Cookies Gelato wächst doch sehr sehr langsam in Vergleich zu meiner gleich alten Green Gelato die ja gleich alt ist 😕

i am eagerly growing more of bliss genetics gear, he really impressed me with the first set of testers

Week 5: A little yellowing on the leaves this week. We believe we have a Mag deficiency. Will adjust when watering. Did a flush due to this as well with Cal/Mag in the water. Defoliation: We took a lot more off this week due to the growth spurt. LST: using paper clips for LST and it is working amazingly. They have really adjusted well to it. Height (inches): GSC1 21.5; GSC2 15.5; GSC3 15; Delight 17 7.19.22: The back left GSC grew 3 inches overnight - crazy!!! Raised the light to accommodate it and placed the other girls on a box to be at her level.

probably won’t work with these for a bit. BUT was fun to grow something out and soon i’ll be able to try it out.

Che dire! È una vera bestia! Ha solo 31 giorni e le radici hanno oltrepassato il vaso in tela! Ottimi nutrimenti,ottima qualità di semi, veramente una genetica dalla struttura robusta e forte! Ho fatto topping 3 volte di fila e ha reagito benissimo ho lasciato che crescesse un po' e oggi ho fatto un lollipoping forse un po' estremo ma ricordatevi che deve ancora entrare in fioritura!!! 💪🏼💪🏼💪🏼💪🏼Al prossimo aggiornamento ragazzi

Autumn is here. Weve been setting up the Roof one Day before " Rainingtime" begun. Now every Day we have Rain, Wind and Sunny Times. Up to now everything is OK. They have got a Feeding today Buds are still swelling , Iam hoping for 2 more Weeks of good Weather

The plant has developed well. Considering it was under a small 20-watt lamp until the early flowering stage and only later moved into a new setup with all the necessary equipment, it has grown very well. Now, in week 11, it shows healthy growth. There have been some issues with yellowing leaves here and there, but overall, it looks good and is thriving.

day 14 added 1/2tbsp magnesium sulfate in 5gal water along with regular flower water amendments. 1gal of water per day average, bridal and thunder can take more water. Ph 6.8 today day 15 I will defoliate in a few days :) day 15 video, you see some stem action day 16 video day 17 I added (4x20w daisy-chained)80w of poop purple ancient leds Keep adding soluble PK, organic booster etc. I see the stacks relax on defoliation for a few days, maybe tomorrow morning (skip day21) I feel like I will be able to chop week 6-7 as my last grow, push hard fast-continue everything is great, soon bridal and thunder will require 1gal water per day. I would like to see even more mass. I'm extremely happy, starting to see frost day18. BIG UPDATE many short vids of final defoliation(ahead of "day 21"). Wild amendments appeared! Any recommendations for a lawnmower? Bridalparty stretched over an inch overnight, led touch diode burn on 1 spot. Raised lights slightly, Added new amendments into water. Bridal wants to drink more than 1gal per day, So I will be using almost 5gal-ish water per day not denying the plant needs-watering. I am very happy! defoliation took about 4h today.

Lovely lady... but getting a little weird in that I've had to reduce her EC several times... I guess she just doesn't LIKE a whole lot of nutes! It's been a struggle this past week trying to get the pH and EC balanced out so they're both stable... and it ALWAYS happens to me about this time in each grow. Some year, I'll figure it out - until then, I'll remain a bit frustrated! LOL! Toying with the idea of doing more "defoliation" to get rid of what I KNOW will be larfy buds... even though I haven't officially "scrogged" her, I've used LST to essentially produce the same results so I'm planning to do a little lollipopping on her... might as well be today! Sorry I haven't been keeping up this diary in the manner I had been... I've got a lot of idiot things going on in my life. If you ever have questions about what I'm doing or not doing with this grow, just DM me and I'll try to explain.... :-D 03/28 .... ok, she's now officially driving me bonkers. Wild pH swings even while the EC holds steady... I can't figure out what she wants at all but we continue to talk to each other... I'll figure out her language soon enough! She's going through a massive stretch period now which might be the cause of all the drama going on inside the bucket... just SHOOTING up and looking fine even if the numbers aren't what I would call happy. Gave her a pretty decent haircut just before she started stretching and I'm glad I did... so many more buds are now getting full light and I've got the canopy where I want it... Might have to do some more LST down the line if she gets much closer to the lights although I DO still have some room to move them up (thank god I got a taller tent!). She's taking her nap right now so I'll post more pictures when she wakes up.... OK... new pics are up as is a video...

Finishing up... she is amazing... HUGE buds... amazing haze fruity smell... She is in flushing so only water for the last days... hope she goes good till the end ... fingers crossed.. 🙏

Sooo she's flipped into flower and shes growing amazing.. would expect any different from thsi strain. She's going to start filling out. Was expecting more of a stretch but maybe there's still time. Started her on bloom now so only good things to come.

Flowering started: Saturday I switched the nutrients in the reservoir to flowering specifications after installing the SCROG and giving a massive trimming. After the final lights out Saturday, 3pm which was an extended session, I switched the timers to come on again Sunday on a period of 8pm to 8am (12 hours). The photos added today are from This morning after the first 12 hour period before the first lights our for 12. *fingers crossed*

She got that snow moon showers a few hours ago… luckily she is lollipop so they shouldn’t be any problems with humidity. Her Sweet smell lingers around.