Likes
Comments
Share
@I_Ozmo_I
Follow
All plants were live frozen and processed to bubble hash. After drying the product the hash was processed to live hash rosin and been cold cured afterwards
Likes
8
Share
This is the last week of the Vegetation stage. At the beginning of the week they were trimmed to allow light to penetrate the canopy. Then at the end of the week they were fed a nutrient tea made from Gonzo Farms - GROW. On the last day the lights were set to a 12/12 schedule to induce flowering. Now, I will keep a close eye on them to spot the males. Once flowering begins, the males will grow "bananas". Then, those plants will be removed from the grow. 😜 Stay tuned for the Flowering stage!
Likes
2
Share
Tropicana Cookies looking 🔥🔥 so far. Covered in Trichomes. Smells like a fresh batch of Tropical Starburst.
Likes
5
Share
Lots of fan leaves ate growing back and I have lots of bud sites. Still feeding plagrons green sensation, sugar royal and power buds at half strength. I will remove all purple stems fan leaves around day 21 of flower.
Likes
4
Share
@Ledros
Follow
Day 72 (2020-07-20): Continuing flush of CBD Crack. G14 will start next watering most likely. Day 75 (2020-07-23): Started flush for G14. Day 77 (2020-07-25): Continuing flush for both plants. Checking trichomes daily. G14 looks right on schedule. Starting to think I might have started the CBD a week early (especially after getting a macro lens for my phone), but moving forward.
Processing
Likes
6
Share
@dank604
Follow
Starting to really take off in length since her 2nd feeding. I've been so far alternating between plain ph'd water and feeding every 3-4 days, moving on to week 5 feeding schedule in the coming days. This girl definitely smells a bit more than my first grow (great white auto) and I like that 😍 I'm wondering when I should start to defoliate a bit....
Likes
5
Share
@Enki_Weed
Follow
Der neue Chiller hat sich als absoluter Game-Changer erwiesen! Sowohl die Wassertemperatur als auch die pH-Stabilität sind jetzt perfekt. Ich habe 15 Liter Wasser gewechselt und die Nährlösung erneuert. Der pH-Wert ist stabil bei 6,1-6,3 und der EC-Wert liegt bei 1,95. Die Blüten sind förmlich explodiert und die Pflanze ist jetzt ein echtes buschiges Monstrum, randvoll mit Blüten. Ich bin gespannt auf die weitere Entwicklung!
Likes
23
Share
This grow was pretty simple ! They went a total of 103 days from seed! Very trichomy dense buds with the smell of Berries vanilla and skunk ! This is a must try for you all Fastbuds has the greats!!!
Likes
24
Share
@BunnyBud
Follow
31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water). ==Update 4 Sept== By mistake, I adjusted the pH twice, once to 7 and once to 8, and obviously the plant immediately showed symptoms of incorrect pH. At the next watering, I'll give Biobizz Grow with a little Biobizz Bloom since the plant has entered pre-flowering. I'll adjust everything to a pH of 6-7 and a ppm of 450-500.
Likes
4
Share
@NuttyYeti
Follow
Coming along nicely. I have to water it twice a day but that's to be expected with such a tiny pot. Should get a nice stick of bud out of it.
Processing
Likes
7
Share
@Kushizlez
Follow
Day 70-77 (Day 71) Not exactly sure why but node spacing on bbb 6&7 is super tight still. Their stems are also harder and less bendy, almost like they’re root bound. Bbb #5 in my veg tent is looking bizarre and I’m at a loss for what to do. I’ve been looking up and asking around about the leaf crinkle and no one seems to know what’s wrong. Trashing a pheno of this would hurt. It could be a keeper too as I don’t think the problem is genetic. It’s definitely root bound but that doesn’t cause contorted new growth like that. I’ve concluded that it’s my dense soil coupled with root bound issues, overwatering and high RH. (Day 72) Later tonight I’m going to give bbb 5 a bath tub flush until it’s reading 200ppms, drain it well and then transplant into a 3g pot with lightly amended soil. I’m also going to give it a light defoliation. I don’t mind stressing the shit out of this plant right now because I won’t be flipping for another week at least. With the small container it will run out of amended nutes mid flower so I will hit it with a few synthetic feedings around then to test out the smokabilty and taste compared to organic nutrients. I might as well give the rest a good defoliation on the rest of the plants too. I will try to get most of what is under the trellis. (Day 73) I definitely defoliated #7 waaay too much. Since it’s tucked away in the corner and a really bushy plant I can’t train it as well as the others. I cut most of the sucker branches and the majority of the lower fans. This should prevent the need to defoliate at all until week 3 of flower. (Day 74) I’ve been reading that higher temperatures with a high RH can affect growth big time. It could be what’s causing all the crinkling and twisting. And now that the plants are in very late veg they could probably benefit from a lower RH. When I was running my temps around 74-78F and 70% RH I was in the perfect range. Now that I’m around 82-86F with the same 70% RH that could be what’s causing it. Hotter air holds more moisture than cooler air and proper vpd at 84F is around 75-80%. I’m going to turn up the speed on my carbon filter and set my controller to 75%. If I don’t see a difference or it gets worse I will drop to 65 and go from there. (Day 76) I finally got the lights raised up another 4 inches or so. It’s not much but it should help reduce the intensity and stretch the nodes more. I’m starting to think the super tight node spacing and droopy/contorted growth has more to do with something I’ve been reading about called ‘soil compaction’. Apparently farmers often deal with compacted soil in fields from running tractors over it all day. When I potted the plants I gave them a good little jiggle to compact the soil down further so I could fit a bit more in the container. I think this could be the culprit as they don’t seem to be drying out evenly. Even the plants in my other room are not drying out like they should and it’s probably from compacting too. With the addition of rock dust and dry amendments the soil can become sandy/clay like and retain a lot more moisture. Wish I would have added a few more liters of perlite and packed the soil a bit looser. Either way I need to get this problem sorted ASAP before I get root rot. Earlier in the season when I overwatered, I stuck a fish tank air pump into the soil and it aerated the soil enough to prevent overwatering. The only reason I discontinued it is because it didn’t have much effect in the 1.7g pots. I just ordered a 36w 6 way fish tank pump that is way more powerful. It was 50 bucks and I’m willing to take a gamble on it. It seems to be my only option at the moment because I can’t just repot. Worst case scenario I can use it for brewing compost teas if it doesn’t work. I’m not sure how well this will work in a giant fabric pot but it’s worth a shot. I’ve heard of people supplementing additional air into raised garden beds with great results. I’m picking off some of the new auxiliary branches to try and widen the node spacing. Growth is definitely slow and stunted but no signs of deficiencies. I just thought of another theory on the node spacing... and the more I think about it, the more I think it’s the mystery problem. I’ve been foliar spraying with 1-1-1 VeloKelp at pretty high concentrations 2-3 times per week. I have heard in passing that kelp and seaweed can somehow reduce stretch. A quick google search reveals that Ascophyllum Nodosum Seaweed and other marine algae extracts contain large amounts of hormones and auxins that reduce plant height and stretch. *facepalm* Guess I’ll stop that for the rest of the cycle. As far as I know there is nothing I can really do but wait for the plant to use up all those excess hormones and nutes. The recent 0-0-15 seaweed extract and 1-0-3 kelp meal I bought is derived from the same kind as the velokelp. I guess I won’t use it again until week 3 or 4 in flower. Tight nodes are very useful in flower but aren’t desirable at all in when trying to scrog in veg. Especially when they’re like a half inch apart. It slows the shit out of a grow. Vietnamese and biker gangs in my area used to grow SOG style and use a synthetic PGR hormone (meant for bonsai trees) called ‘paclobutrazol’ that would make the weed rock hard dense so they wouldn’t have to pay people as much to trim it. I’ve heard that in recent years they have made the switch to using kelp extracts because paclo is getting harder find and is not meant for food crops let alone smokeable crops. I’m ashamed of it but I have smoked pounds of PGR weed long before I knew what a PGR was. 🤷‍♂️ (Day 77) One more theory. Ever since raising up the plants up onto that shelf the root zone is probably significantly warmer and the bottom of the pot (where most of the roots are) drys out way quicker. It’s possible that the warmer root zone could not be holding dissolved oxygen at the proper rate resulting in that over/underwatered look. Or it could be that I’m not watering enough at once to reach the bottom of the pot where the roots are and it’s indeed under watered. I’m going to water in a gallon when I get my new air pump and see if that makes any positive change. If I see the new air pump making a difference, I will flip on the 21st of April. If I don’t see a difference, I will carefully untangle the plants from the scrog net and remove the shelf. That extra foot should make a massive difference with ppfd and will cool down the roots significantly too. I’m thinking about grabbing a simple soil/compost thermometer to check the temp of the medium. Better safe than sorry. Rough week. Hopefully everything get smoothed out in the next little while before I flip.
Likes
25
Share
@Kirsten
Follow
Hulkberry has some definite issues. The leaves are damaged, so I'm concerned that the plant will be unable to carry out its normal functions. If the plant can't properly photosynthesise, I really don't know how she'll make it to harvest. I had phosphorus excess in this grow before, and I think that's what's happened again. I think the excess of phosphorus has prevented the plant from being able to uptake Calcium, Magnesium and others. 8.5.25: The plant was watered with 2ltrs of dechlorinated water PH'd to 6.2. I added per litre; ♡ 1/2 TSP Mega Crop Part A ♡ 1/4 TSP Sea K(elp) PPM: 890 PH: 6.2 I decided to feed each plant separately and mix it up in the 2l jug. I gave an additional 2l of dechlorinated water PH'd to 6.4 with the following nutrients; ♡ 4ml Ecothrive Trace ♡ 1/4 TSP Ecothrive Biosys PPM: 636 PH: 6.4. Let's hope I can manage to see her through to harvest somehow! Thanks for following along 😊🍃✌️💚🤞
Likes
1
Share
@Shakazulu
Follow
Getting hot here. Scattered thunderstorms, very windy. The girls are loving life. I am hoping the strawberries and cream will be a male. I’d like to see what I can come up with, breeding it with the Afghani Purple Kush and the Platinum Silk. Watering almost daily until I see a bit of water coming out of the bottom. Supersoil is holding strong and keeping them very healthy. I am going to start another Round of sprays with azamax. I will do once every 8 days at 1.5oz per gallon in a pump sprayer. I have seen several leafhoppers on my plants. Most of the other insect life I posted pictures of have not been seen on my plants, except hover flies!
Likes
10
Share
End of week 6 for the Green Papaya from super sativa seeds club. We are almost done, some trichomes are starting to get brown, but just a small portion, i guess we will be reviewing day by day and maybe extended another week, lets see 🙈
Likes
22
Share
@Naujas
Follow
Well, I came back after vacation, and this is what I found: it jumped up to the light.... I made a little cropping and tried to use more LST, the problem is that it no longer fits :D :D :D but at the same time, it's really interesting to me trip :)also, several rings are already affected by the light, my 50w light currently shines at 100%, maybe it would be better to reduce it to at least 80%?.
Likes
15
Share
@Trinidad
Follow
As a beginner, when you get mold on your bud like this, you know that you are doing something right. Only the biggest and best buds suffer from bud rot while drying, it shows how important it is to have dehumidifier when drying big buds. You can clearly see she is a high yeilder. Her final weight came in at 189 I had to tie the dehumidifier high up in the tent so that the heat coming from it would not dry out the buds like what happened in my 1st grow, Wurlz F1 by Zamnesia. She is very sticky. She has terps similar to that of king Louie...very musky and fragrant.. it's difficult to explain, however she is very delicious
Likes
14
Share
91 Octane - she is almost close to harvest stage. But I’m gonna give another two weeks and then I’ll harvest her. In previous weeks, her buds are getting dense and heavy so her branches are almost fall off. Then I solved that situation with twist tie and you guys will see on photos. Banana Daddy - she showed monster leaves and I’ll solve in one week curing then I think her buds will grow more bigger and dense. If you have new ideas or advices, you guys can suggest, advise, or teach me new ways of solving those things. Sugar Cane - the late flowering baby is now showing her beauty with trichomes like white sugar. And her buds are starting bigger and bigger. I think this sugar cane will be like 91 Octane.