Likes
Comments
Share
@burnout
Follow
Day 21 of flowering more defoliation. Added 7 tablespoons of rock phosphate to each container. House is starting to smell like fruit infused gasoline despite the two carbon filters and Ona gel all over the place.
Likes
19
Share
@DrLaggis
Follow
🌱 Day 50 - First Day of Week 8 🌱 Hello, Grow Friends! My plant is doing well, and it’s amazing to see visible progress every few hours. 🌱✨ The buds are in full throttle, and I feel like the plant is now needing more water as the pots are drying out faster. 💧 Watering: I’m still watering with 1L every two days. 💦 The dosage of BioBizz Grow and BioBizz Bloom has been increased according to the BioBizz feeding schedule. The pH of the water remains constant at 6.0. ⚖️💧 Temperature & Humidity: Luckily, the weather in Germany is cooling down, so I no longer have to deal with temperatures of up to 30°C in the tent. 🌡️🍂 I’m expecting temperatures to settle between 18-23°C now that we’re in September, and humidity should stabilize around 50-55%. This will create perfect conditions for the upcoming drying process. 🍃✨ Plant Health: The plant is looking good overall. 🌿 I did have some calcium and magnesium deficiency symptoms recently, but I’ve managed to get that under control with CalMag. 💪 I’m continuing to carefully remove any leaves that are noticeably blocking light to the buds and hindering photosynthesis. 🍃✂️ Vibes: Every day, my plant still enjoys an hour of Lo-fi Jazz music. 🎶🌱 I think it helps set the perfect growing atmosphere. 🎷 🌱 Day 56 - Last Day of Week 8 🌱 Final Feeding: Today marks the last day of the fourth flowering week and the last day I’ll be feeding the plant. 🌿💧 From now on, the plant will receive only water for the final 14 days to flush out the remaining nutrients from the soil. 🚿 As a beginner, I’m unsure if two weeks without nutrients will be enough for the plant to finish properly. There’s a part of me that worries about potentially wasting its full potential by skipping nutrient periods. 🤔🌱 However, I’ve decided to stick with the plan—after 14 days of just water, I’ll harvest the plant. ✂️🍃 Humidity & Temperature: This week, the weather has cooled down significantly, and I no longer have to struggle with high temperatures. 🌡️🍂 The temperature ranges from 19-23°C during the day, and humidity sits between 49-56%. I think these are ideal conditions to bring out the purple hues in the buds. 🍇✨ Defoliation & Plant Care: I’ve finished the final defoliation and trimming of the plant this week. 🍃✂️ From now until harvest, I’ll avoid making any more changes or interventions, as I want to keep the plant stress-free and allow the bud production to progress smoothly. 🌱💪 Trichome Observation: As a beginner, I’ve started checking the trichomes this week, but I’m finding it challenging to distinguish between clear and milky trichomes. 🔍💎 I plan to harvest when I see 90% milky and 10% amber trichomes. 🌿✨ I’ll keep you all updated next week, and don’t forget—there are new pictures every day! 📸🌱
Likes
128
Share
💩Holy Crap We Are Back At It And Loving It💩 👉SHES READY TO BE CHOPPED IN THE NEXT DAY OR TWO👈 Growing in a 11 ounce pot 👈 👀 👀 👈 Growmies we are at DAY 63 and she's just killing💀it👌 TALK ABOUT FROSTY 👈 Amazing results thus far for the Tiny Pot 😀 👉Added straws within the Tiny pot to help watering in week 4 👈 So I'm starting to see she needs watering every single day and now need nutrients 🙃 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 WATERING SINGLE TO TWICE DAILY 😋 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 JUST KNOW EVERY COMMENT AND OR LIKES IS MUCH APPRECIATED
Likes
9
Share
We start week 3 of bloom!! Goofiez 2 amor compound genetics it’s the champions!!
Likes
16
Share
@Suemchen
Follow
Sanlight EVO 3-60 at 80% Day 57: watering still with rain water and 3 ml/l AlgaBloom, 1 ml/l CalMag, 2 ml/l Hesi Boost and 1 ml/l Green Sensation 👌🏻 pH at 6.4 👍🏻 Day 62: Night Temperatur dropped to around 17 degrees Celsius because the heating was Not on.... Leaves turned purple.... watering still with rain water and 3 ml/l AlgaBloom, 1 ml/l CalMag, 2 ml/l Hesi Boost and 1 ml/l Green Sensation 👌🏻 pH at 6.4 👍🏻
Likes
14
Share
Likes
12
Share
Vamos bien el olor es dulce fuerte afrutado y de flor muy prensada. Esta casi listo todo para poder disfrutar de estas deliciosa hiervas..muchos tricomas Regadas con amor y mucha felicidad Charly Grower 👨‍🌾
Likes
21
Share
@NSABND
Follow
Start of Week 9 🙌 I plan to use fertilizer for bud growth from day 64 to day 70+... depending on when the harvest time occurs 😉😄👍 Started working with fertilizer today, every 2 days a mixture of 10ml per liter as long as the buds have not properly developed trichomes 😵 I hope this works 😵😲😱 Day 68 with fertilizer again
Likes
23
Share
She’s getting frosty and dank 👃🍪🍊🍓🍰🍌🍒🍇🍭👃 Day 29 almost half way , happy with all the phenos so far all frosty so many terps .. started feed the canna nutrients plants canna pk1314 .. 2 flush’s Got the remo plants all most on the proper Ec again
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 08/11/2019 - Showing early flower development? 09/11/2019 - Gave her 0.500 ml plain water PH 6.5, she's starting to need more water and also due to 30c temps. She's also showing light green around the leafs maybe slight magnesium deficiency. 10/11/2019 - Yellow leafs showing up really fast so I 'flushed' the medium with 1l of 6.4 PH plain water, watered until some run off start to showing, change the watering plan again, now I only water when the pot feels light and dry at the bottom. 13/11/2019 - Pot was really light and dry at the bottom so I gave her 1.5l of water with 0,75ml of Grow, 1,5ml of Bloom and 0.75ml of Max BioBizz PH 6.5 until some runoff started to appear I think was too much again : also added a work-supplement led strip light. 14/11/2019 - Leaves looking pale raise the light to 45cm instead of the recommended by manufacture 25-40cm.
Likes
9
Share
Día 48 . Ya se comienza a llenar la carpa de brotes 🌴, aún falta para pasar a floración 👽. . El led que uso es un TS1000 de Mars-Hydro 🛸🚀 a 17" o 40cm de las plantas. . ▪️Variedad: Big Devil F1 Fast Version ▪️Carpa: 80x80x160 ▪️Temperatura: 28°C ▪️Humedad: 65% ▪️PH agua: 6 ▪️NPK: 8-3-3 : 2ml/litro
Likes
4
Share
Man at this point we are bushed out and everyone needed a defoil like crazy Changed my lights spectrum to flower I also went full tilt into the nute line I’m now running the base micro bloom and grow added bud candy b52 and big bud
Likes
15
Share
Slight over nuting prob. Leaf distortion. Dropped dosage and hope for best. No issue with colour. Growth is steady: she is a short stocky plant so far in comparison. Stem thick.
Likes
4
Share
This week i am fighting against cold temperatures and humidity. Its a bit annoying, as everytime i warm up the place, the humidity level goes higher which is commen sens. 4 days ago i watered, and left the fan rotating on low speed and i think the plant got too cold. Thats is why she looks a bit wilted. Hopefully it will be better soon. Apart from all the plant is responding pretty well to LST and i have a very even canopy. Very excited on this grow as its my first proper LST project
Likes
6
Share
@rvabudman
Follow
The buds are forming! Changed to a nicer light recently, light is great, although my mars hydro 600w did me justice. This new one I got of amazon for under $100 is 1000 watt led and crushing it. It has increased temps significantly which is a bit tough for me to control given my tent is in a closet. Also it is starting to getting less humid outside, so I reduced airflow in the tent to keep the humidity at 50. I have a small humidifier coming soon (oddly a Corporate work gift lol).
Likes
19
Share
🌸 White Widow — Week 7 Flower (Week 11 from seed) Status: Full flower, bulking rapidly. Vibe: Dark foliage, compact form, heavy frost, 90s aroma profile. Feeding: Aptus + Plagron lineup (Power Buds, Sugar Royal, Green Sensation, Regulator, CalMag, All-in-One) Photos: Sony a6000 — loyal workhorse for studio shots. 📷 ⸻ 🧠 Deep dive — Why 12/12-from-seed makes a plant “go hard” Plants evolved to reproduce. Their primary biological drive is to make seeds. Photoperiod (day length) is one of the most reliable seasonal cues plants use to decide: is it time to flower? Mechanisms at play (simple → nerdy): • Photoperiod sensing: Leaves detect day length via phytochrome systems (Pr Pfr). Short days (or the 11/13 rhythm) flip the hormonal cascade toward flowering. • Florigen & flowering hormones: When the plant senses “short days,” it produces mobile signals (florigen) that travel to the shoot apex and shift gene expression from vegetative growth to reproductive development. • Carbohydrate reallocation: Energy stops making more leaves/branches and is directed into calyxes, resin synthesis, terpene pathways, and seed/flower tissues. • Result: A plant that thinks “the season’s ending — reproduce now!” goes all-in: denser flowers, rapid calyx swelling, intense trichome production. Important point: they don’t know about pollination. The plant can’t tell you whether pollinators exist or whether pollen will land — it simply invests in attractive, resinous flowers to maximize reproductive success. As growers, we exploit that drive to produce potent sensimilla (unpollinated) flowers. ⸻ 🔬 Why your White Widow is exploding in quality right now • Immediate reproductive programming: Starting floral signals early (12/12 from seed) forces the plant to prioritize flower formation rather than vegetative mass. That yields compact, dense colas. • High PPFD + short day = strong DLI in less time: With fewer hours of light, your lamp intensity is higher in those hours → powerful photosynthesis during the window the plant has chosen. • Nutrition tuned to flower: the Aptus + Plagron stack feeds the metabolic surge — PK + biostimulators for bulking, sugar stimulators for terpene pathways, Ca/Mg for structural health. • Genetics: White Widow is resin-happy; give it the right cues and it will frost up like a sugar cookie. ⸻ 🌈 Why her colors are going dark (and why that’s beautiful) Leaf & bud color comes from a balance of chlorophyll + accessory pigments (anthocyanins, carotenoids) and is influenced by: • Genetic propensity (some phenos are naturally darker) • Temperature swings (cooler nights often increase anthocyanin expression) • pH / nutrient balance (some deficits/ratios nudge color pathways) • Light spectrum intensity (strong red/far-red influence can shift pigment expression) Dark phenos often correlate with high terpene and anthocyanin expression — visually stunning and often highly aromatic. ⸻ 🔁 Quick timeline recap (for newcomers) • Germination & early mistakes: initial heat-mat loss → restarted, one strong survivor. • Veg: compact, short internodes under the 11/13/12-12 shuttle → stacked nodes. • Early flower: slow to show, but once she flipped she committed. • Now – Week 7 flower (Week 11 from seed): heavy bulking, thick trichomes, deepening color, classic White Widow aroma emerging. ⸻ 🔭 What to expect next (this week → next week) Expect: • Continued bulking of calyxes and cola weight. • Explosion of trichome coverage — white, cloudy glands multiply. • Stronger terpene smell (earthy, spicy, resinous 90s profile). • Possible color intensification — deeper greens, potential purples depending on phenotype & nights. Do not expect: • Major new stretch — she’s committed to flower and will remain compact. • Immediate harvest — typical White Widow still wants its weeks; plan for patience (mid-late flower bulking happens over several more weeks). ⸻ ⚖️ Should you run all seeds 12/12 next cycle? (pros & cons) You asked if you might run every seed 12/12 — here’s the honest rabbit-hole: Pros • Much faster cycle → less time to harvest. • Compact plants → ideal for small spaces or stealth grows. • Often denser single-plant yields; less training needed. • Great for experimentation, multi-strain rapid rotation. Cons • Generally lower total biomass per plant vs. long veg runs. • Some genetics need veg time to express full canopy & branching; yields may be lower for those strains. • Root systems can remain smaller → may stress under high PPFD if not supported. • Less flexible for heavy-topping/lst/manipulation strategies. Bottom line: for strains with good genetics for flowers (like White Widow), 12/12-from-seed can be very rewarding. For sativa-dominant, tall strains you might lose yield without long veg. ⸻ 📷 Gear love — Sony a6000 shoutout I’ve got to echo it: that camera is a workhorse for growers. Compact, responsive, great color fidelity, and perfect for low-light studio shots when paired with proper exposure. The a6000 captures the leaf texture, color depth, and bud gloss in a way phones struggle to match. Long live the loyal shooter. 📸✨ ⸻ 🙏 Gratitude — the usual and the real Thank you to: • Zamnesia — for the genetics & the nostalgia. • Aptus & Plagron — the chemical & biological push that lets the plant sing. • ThinkGrow / Future of Grow / TrolMaster — lighting, control, and environment orchestration. • You — the makers, lovers, critics, curious readers — your energy fuels this diary. And to our White Widow — for showing up, forgiving mistakes, and giving back in beauty. 💚 ⸻ Week 7 flower — Week 11 from seed. Darker colors, heavy frost, the classic 90s scent, and a compact structure that proves 12/12-from-seed can produce absolute fire. We went full-in on Aptus + Plagron, kept the Emerson red-lead sunrise/sunset, and trusted the genetics. Watching her build is pure joy. Come see the series in 4K on YouTube — every detail, every shimmer. 🌿🔥📷 #WhiteWidow #Zamnesia #GrowDiaries #12fromSeed #EmersonEffect #Aptus #Plagron 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. Friendly reminder all you see here is pure research and for educational purposes only, With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all P.S. — Deep dive on DLI (Daily Light Integral) — short, clear, and a little nerdy (in the best way). 🌞🌿 1) What is DLI, simply? DLI = the total amount of photosynthetic light (photons) a plant receives over one day. It’s expressed in moles of photons per square metre per day (mol·m⁻²·day⁻¹). While PPFD (μmol·m⁻²·s⁻¹) tells you instantaneous light intensity, DLI tells you how much light the plant actually used that day. ⸻ 2) The formula (how to calculate it) Use this exact formula: text{DLI (mol·m}^{-2}text{·day}^{-1}) = frac{text{PPFD (μmol·m}^{-2}text{·s}^{-1}) times text{seconds of light per day}}{1{,}000{,}000} Where seconds of light per day = hours of light × 3600. I’ll show worked examples so it’s easy to follow. ⸻ 3) Worked examples (digit-by-digit so it’s crystal clear) Example A — your reported PPFD ≈ 766 μmol·m⁻²·s⁻¹ and 11 hours light • seconds of light = 11 × 3600 = 39,600 s • photons per day = 766 × 39,600 = 30,333,600 μmol·m⁻²·day⁻¹ • convert to moles: 30,333,600 ÷ 1,000,000 = 30.3336 mol·m⁻²·day⁻¹ So: 766 μmol·m⁻²·s⁻¹ × 11 h → DLI ≈ 30.3 mol·m⁻²·day⁻¹ Example B — same PPFD but 12 hours • seconds = 12 × 3600 = 43,200 • photons = 766 × 43,200 = 33,091,200 • DLI = 33,091,200 ÷ 1,000,000 = 33.0912 mol·m⁻²·day⁻¹ Example C — other quick refs • 700 μmol × 11 h → DLI ≈ 27.72 • 800 μmol × 11 h → DLI ≈ 31.68 • 400 μmol × 11 h → DLI ≈ 15.84 • 1000 μmol × 12 h → DLI ≈ 43.2 (You can plug any PPFD and hours into the formula — those are ready-made reference points.) ⸻ 4) What DLI targets are useful for cannabis? • Vegetative (gentle): ~12–25 mol·m⁻²·day⁻¹ • Flower (typical good range): ~25–40 mol·m⁻²·day⁻¹ — most home/pro growers aim here • High-intensity/CO₂-enriched commercial: 40–60+ mol·m⁻²·day⁻¹ (needs CO₂, stronger conditioning) So your example (≈30 mol·m⁻²·day⁻¹ at ~766 PPFD × 11h) sits very nicely in the flower range. That explains the dense bulking + heavy resin you’re seeing — our DLI is right where White Widow loves to convert energy into flowers. ⸻ 5) Practical implications — what DLI affects and what to watch • Higher DLI → higher photosynthesis → more carbohydrate to drive bud bulking and terpene/trichome production. • Higher DLI requires more water and nutrients. Plants transpire more and pull more minerals; be ready to feed and irrigate appropriately. • Leaf temperature / heat stress: pushing PPFD up increases canopy energy/heat — keep airflow, VPD, and room temps under control. • CO₂ matters: if aiming beyond ~40 mol/day, elevated CO₂ (e.g., 800–1200 ppm) becomes productive; otherwise additional light won’t be used efficiently. • Distribution matters: DLI is an average over the canopy. Hotspots or shaded pockets mean some flowers get too much or too little — even light spread (and PAR mapping) matters. ⸻ 6) Actionable tips for your run (based on your 11/13 / 12/12 experiment) • We’re hitting excellent flower DLI (≈30 mol/day at 766 μmol × 11 h). That’s why buds are dense/frosty — keep the rhythm. • If you shorten hours (e.g., 11 h) keep PPFD high to maintain target DLI. If you lengthen hours (12 h) you can reduce peak PPFD slightly and still hit the same DLI. • If you raise PPFD to chase more DLI, ramp slowly (a few μmol/sec per day) to let stomata and roots acclimate — avoid sudden bleaching. • Watch watering & EC — higher DLI → faster uptake → more frequent but measured feeding. • If you ever push DLI 40 mol/day consider CO₂ enrichment and perfect VPD control to have that extra light used efficiently. ⸻ 7) Quick rules of thumb • Want to hit ~30 mol/day with 11 hours on the clock → aim for roughly 700–800 μmol·m⁻²·s⁻¹. • Want ~33 mol/day at 12 hours → ~766 μmol·m⁻²·s⁻¹ matches that nicely. • If you see leaf cupping/bleaching, you’ve likely exceeded safe PPFD for that canopy or temps are too high — back off, check VPD.
Likes
16
Share
Durante esta semana la niña se termino de recuperar del estrés hídrico y tiene un buen pan de raíces. Aumento su consumo de agua y riego cada 3 o 4 días, intercalando riego de pura agua estacionada con ph 6,4 y 1er riego con fertilizante de vegetación. La niña crece frondosa con un gran tallo principal fuerte y grueso, y con poca altura. Realizo la primer defoliación y aplico un lst muy suave para permitir un mejor flujo de aire entre las ramas nuevas y mayor apertura de luz. La planta responde bien a la poda y el lst y se prepara para entrar en la pre floración-