Another good week. Amazed how much purple this strain put on right away!

// Day 78 I put her inside. I know, that's cheating, but I do not care right now. The weather will be abyssymal in the next days and I do not want to keep her just in my room at the balcony door because she stinks amazing, but I can't let her stink up the apartment. And she is pretty late in flower, I really want her to work on the buds, let them thicken up and I just want to enjoy the outcome in the end. This grow is already incredibly long for an autoflower and she still needs 2-3 more weeks, when looking at her bud sites. I don't want to harvest trash buds after investing 3 to 4 months into a plant. If the weather is good again, she will be back outside. If the weather is trash with rain all day, I'll keep her in the tent. My main concern is her bud development. The sites are huge but the calyxes are just not fattening up. You can see it in the pictures, they're very airy and overall not "sexy" looking, if you know what I mean. I hope that she finishes nicely since this grow went amazing so far. She is an absolute unit and I want her to finish perfectly. Let's see how she developes in the next 14 days. With 78 days, this plant is very old, but I've seen autoflowers getting harvested after 90 days or even 100 days. So I will just keep calm for now and I try to enjoy the last 2-3 weeks of her grow life.

She started flowering this week yay! Slowly upping the nutrients, have read so much about giving half strength of Fox Farms so I don’t want to over do it. Have a few leaves that have a few spots of discoloration, and I noticed the stems turning a bit purple but overall still really healthy! Overall going well! Going to keep upping the nutrients.

#seedsman420growoff and #SeedsmanSeeds 📆 Week 2, 4-10 May 2024 4-9 May - Observed and let the seedling grow. 10 May - Removed first two branches from seedling (see video). 📑 The seedling is growing as expected, and showing no problems. It has always been a practice to remove the two branches from the first true leaf nodes, because they rarely are able to keep up with the plants growth, and just suck energy basically. The rest of the week was making only minor PH adjustments as needed to maintain the desired level of 6.2 🍶 4 May no nutrient solution change, 1st change will be week 3 🍽️ 4 May feeding schedule unchanged 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 1.0 at 70 degree F 🔆 Light power at 50%, DLI 13 canopy coverage at 18hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.

I made a new sewing solution for the Candy Bubatz. I didn't use enough CalMg. Now I mixed the water with CalMg to an EC of 0.4 and then added all the other nutrients. I'm at an EC of 1.3 just like Canna says. I added more Rhizotonic because the roots aren't that mature yet.👽

Que pasa familia, vamos con la septima semana de floración de estas Orange Sherbet Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. Vamos al lío, El ph se controla en 6.2 , la temperatura la tenemos entre 22/24 grados y la humedad ronda el 50%, añadimos ya varios productos de la gama de Agrobeta. Las próximas semanas veremos cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Final flush this week and start the ripen feed

Day 64 ( 31 of 12/12 ) So a good week in the grow room , Been sorting out some life issues so havnt been online as much as i wanted, The girls are looking fantastic , Mills c4 has been upped to 1ml and as there all nice and green. i didn't up mills A+B like there chart suggests as if anything there a little too green , Ph at every feed has been 5.7 & end run off is 6.1 . As we are into the full swing of flower i can see we have x3 different pheno types im sure , Plant number 5 is VERY strong incida in shape and appearance And looks like it will finish way ahead of the rest so far , it already had VERY tight internodes and is shaping up to had HUGE buds . Plants 3 - 6 & 4 are looking the most sativa and there buds look furthest from finish , (EC : 1.6) 1 & 2 look epic and lots like the lots like the images on the dinafem site so far , and are growing fat

Not much to say about this real first grow week’s start. Everything looks ok, steady growth at 40% light. I had to restart the control app a few times, therefore the broken graphs. At night times, the control software tries to attain optimum humidity rather than optimum VPD. That’s why VPD is dropping when the lights are out. CO2 is back to baseline – really wonder what the reliable values are … I found I have to silence the blowers when a timelapse photo is being taken. The shaking you see at the beginning of the grow video should not appear, or to a much less degree, in the future. Day 13 (July 30th) shows good, steady growth. Leaves are a bit spotty, although less then the processed images show. Something to be worried about? I would not currently … All are developing their 3rd nodes now. The controlling Raspberry Pi crashed last night when I tried to access it remotely … ;( – looks like the Connect software is in need of an update. The leaf temperature sensor is now really aimed at lady-to-be nr. 1’s leaves. Nothing to change that I see. I won’t cut the top yet, just watered the outer circle of the big pots slightly to encourage root growth. Day 14: Nice growth. First plant is now at 11 cm, and at 12 cm on day 15. Nothing special to report so far, except for I had to move the internal camera a bit upwards to keep little lady #1 in focus. Day 16 and last day of this week (Aug 2nd): The young ladies are now at about 14 cm tall. Growth looks very compact though. I think the two inside girls will lose their heads next week; I’d still prefer to have one or two more nodes available. Pictures of this day are taken at the end of the plants’ day. Notice their leaves are pointing upwards, which should be a sign that they want more light. I turned the lights up by another 20% for a total of 60 W now. Weather was pretty hot the last days so it wasn’t possible to stay in optimum VPD range but as long as growth is this satisfying I don’t mind. I will water them slightly at their next day start. Outside plant’s soil humidity might still be at around 58% officially, but drying starts at around 40% with this measurement and the sensors are placed quite closely to the stems so outer soil is dryer. I am preparing the plant water with some additions and a frequency imprint suing some Solfeggio and Schumann frequencies.

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Activaron 24hs en un vaso de agua sin cloro. Luego al tupper con papel (rollo de cocina). Luego de 3 / 4 días ya se pasaron a tierra. En los primeros días y luego, en toda la etapa vegetativa vamos a usar un humidificador para tener una humedad entre el 70% y 80%

Vamos bien la resina atope con la cookies #2 BUENA VARIEDAD

Giving these girls some good flushing out they only have 5-7day till harvest

Sadly only pictures before harvest Didnt used any fertilizer in week 9

Vemos un hermoso avance en el trasplante, no hare ninguna poda 1 semana mas y pasaran a 5lts

I don’t know what’s going on with my big girl I think is wind burn by me increasing the airflow I’m thinking it’s windburn well anyways I don’t know if it’s budrot cause I really want to chop thoses two tops off just incase help anyone if you know what this is

Our Permanent Marker from Zamnesia has responded very well to the application of the techniques, it has started the flowering phase very well and is preparing to prepare our gifts. ** Remember that we are growing a plant worked with the techniques indicated and another left to grow without pruning to preserve its speed; in the previous/next diary you will find the other plant of the same variety. Here we are talking about a very effective Main Lining, a bit difficult at the beginning but now very successful. Generally speaking, it is performed like this: first topping cut at the 2/3rd internode maximum, the plant is allowed to continue for another three internodes and then topping again. The lateral branches can be worked with topping again but I recommend doing it only if the plant is responding well. We are in a 100% organic configuration, the soil is recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhizae Mix (4 g in the mix, 1 g under the small fiber pot). We are fertilizing with // 1 ml/l Power Roots - 1 ml/l Pure Zym - 1 ml/l Sugar Royal - 3 ml/l Alga Bloom - 1ml/l Power Buds We sprayed 5 ml/l Vita Race Foliare once a week. For all the info https://plagron.com/ All nutrients are available from Zamnesia: https://www.zamnesia.io/it/531-growshop/476-fertilizers We always have RQS's excellent mycorrhizae running through the soil. https://www.zamnesia.io/5778-mix-micorrhiza-easy-roots.html Try this variety, it is a top strain of recent years very high level of thc ---- // https://www.zamnesia.io/it/12508-zamnesia-seeds-permanent-marker.html Brief description of Zamnesia // Here is a good opportunity to enrich your genetic library with another award-winning variety: Permanent Marker was crowned Strain of the Year 2023 by Leafly, thanks to its intense aromas, high levels of THC and its physical vivacity. Originally created by JBeezy and Seed Junky Genetics, our team managed to secure a cutting of this modern top cultivar, so you can grow it comfortably at home, whether indoors, outdoors or in a greenhouse. Permanent Marker fits perfectly in any environment! The whole world of growing and more is at Zamnesia: just take a look at the site and you will find "all the best that nature has to offer" in various shapes and colors. -- // www.zamnesia.com

Full gas ⛽️ 🔥 🔥 🔥 🏎️ 🔥 🔥 🔥