Likes
Comments
Share
It was an easy harvest as the colas developed nicely. Hardly any popcorn nugs and very little sugar leaves. If the weather had allowed it, I think she could have grown even bigger, but I'm more than happy with the outcome!
Processing
Likes
39
Share
Started LSTing. We'll see what a few weeks does to them! Growth is vigorous in DWC. Noticed that the DinaMed's PH was dropping drastically over 24 hours. PPMs were way up at 1100. Diluted the solution by two thirds and re PHed her.
Likes
4
Share
@ramofre98
Follow
Amazing week, very satisfied, thank u wedding glue
Likes
34
Share
@Salokin
Follow
Hello Growmies, Two weeks into vegetation, our Watermelon Candy by Zamnesia is striking a fine figure in the grow tent. Each plant has achieved a notable height of 14 cm, an impressive feat for their age, suggesting that they are well on their way to becoming vigorous and bushy specimens. The uniformity observed in the first week continues to be a defining trait of the Watermelon Candy strain. These plants, with their symmetrical leaf structure and consistent growth patterns, are reflecting their strong genetic lineage. The lush green leaves and the tautness of the stems speak volumes about the care they've received. Their transplant into the 12.5-liter air-pots, coupled with the application of Great White during the process, has provided them with a fertile foundation for root development. This mycorrhizal support will surely bolster their ability to uptake water and nutrients efficiently, setting them up for success in the coming weeks. The controlled environment, with precise management of temperature and humidity, continues to foster their growth. With the lights dimmed to 25% and delivering 150-180 PPFD, the plants are receiving the perfect amount of energy to thrive without the stress of overexposure. The IR lighting before lights on and off, along with the midday UV light exposure, is fine-tuning their growth cycles and boosting their natural defenses. Once the inline fan is connected and operational, you'll have complete control over the tent's environment, enhancing dehumidification during the night and ensuring optimal conditions 24/7. It's this attention to detail and environment that is paving the way for these Watermelon Candy plants to flourish. Stay lifted, Salokin.
Likes
19
Share
@BB_UK
Follow
The grape is still a little slower than her sister but was last time and she’s destined to be a smaller plant it’s in her genetics! Her max height is 120cm and that’s what I’m aiming for! The purple urkle is thriving! She’s growing an inch a day or so and producing so many extra branches! Thanks to dynomyco! I have added a new light in there too! Mars hydro TSW2000 so will get a better yield! I literally have no light loss! I’ll be flipping anytime soon now! As my elder girls are at 6 weeks nearly! I’ve also added a transparent PNG logo for WeedSeedsExpress for anyone else growing there strains just save the picture directly! And you can overlap it on videos and photos!
Likes
6
Share
Que pasa familia, vamos con la cuarta semana de floracion de estas Lemonpaya feminizadas de fastbuds. Vamos al lío, de las 3 plantas, me quede con 2 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros que además provocó un shock que también solucione. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Las flores empezaron a formarse y progresan a buen ritmo. No entiendo que a sucedido , uno de los 2 ejemplares tiene un bloqueo severo de nutrientes, estoy controlando el Ph correctamente y la alimentación ración pues corte a ver si vuelve a reestructurarse. Hasta aquí todo, Buenos humos 💨💨💨
Likes
13
Share
Going threw week 9 on this lady and she’s doing amazing not to smelly honestly but I don’t honk she is her full potential honestly if you ask me and that’s all my fault no one to blame but me here. But she is definitely putting on for her crystals lol 😂 gonna be ordering some more seeds real soon @Dinafemseeds
Likes
26
Share
Flowering day 30 since time change to 12 / 12 h Hey guys :-) Every day when I look into the tent, the sight and the smell are a dream 💚. They are all developing very well. There is no tip of the leaf that looks funny at the bottom or at the top 😃. They were watered every 2 days with 1.3 l each (nutrients see table above). They were all checked and checked for their health. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/lemon-candy Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
19
Share
@Naujas
Follow
the girl looks good :) I have already removed the yellow "autumn" leaves:) she received food with 1500ppm, the weather is not very good, I am afraid that it will start to rot :( there will be an update :) in 2-3 weeks ;) good luck growing
Likes
2
Share
Likes
47
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Processing
Likes
43
Share
Got some better shots without light and a little video my cam is a bit shit got a video of trichs also in there girls seem to be flushing well started flushing the quick one later than the others as wasn't as developed. Took the 2 tester buds of very bottom under the plants on the first day of flush to try estimate how long to flush for........last pic and vid before harvest next uploads will be harvest hopefully
Likes
6
Share
Days 15 to 17, varying by plant: My journey of experimentation, aiming to refine and perfect my cannabis cultivation methods, continues. This venture’s ultimate objective is to position myself as a preeminent cannabis cultivator in my locale. As I navigate through the labyrinth of regulatory licensing, I’m conducting a trial run with my seedlings under continuous lighting conditions and a minimal nutrient regime. My primary goal during this phase is to identify any potential hiccups that could hinder the growth process and ultimately impact the productivity of my intended commercial operation. As I delve deeper into this exploratory phase, I draw invaluable insights from the thriving cannabis community, whose collective wisdom informs my decision-making process. Given my geographical location and available resources, I’ve opted for a strategic shift in my cultivation strategy. Previously, I’ve been procuring seeds at an average cost of $10 to $22 per seed, with a relatively broad success rate variance, ranging from 70% to 85%. However, an alternative presents itself in the form of local cultivators. These businesses offer cannabis plants aged between 2 to 4 weeks, boasting an impressive variety of over 100 strains. These juvenile plants are offered at a cost-effective rate: an average of $100 for eight plants. With a success rate hovering between 70% and 95%, these plants offer excellent value. Essentially, I can access pre-grown plants at a substantial discount, in turn significantly boosting my chances of success. Consequently, I am poised to transition away from growing cannabis from seeds to harvesting. By sourcing my plants from local cultivators, I stand to significantly reduce overhead and production time—an undeniably smart move from a business standpoint. This strategic pivot signifies the end of an era and the exciting beginning of a more efficient and cost-effective chapter in my cannabis cultivation journey. I am currently outlining a plan to expand my cultivation by acquiring several juvenile plants, which should be happening between July 1st and 3rd. The new additions to my garden will include Acapulco Gold, Gelato, White Truffle, and Runtz. These will be cultivated in harmony with the existing growth, which comprises God’s Gift, Northern Lights, and the final surviving F1 Epsilon. My primary objective is to establish the most efficient and cost-effective supply chain possible. I aim to achieve this through the use of an off-grid system that runs solely on solar power, which will ensure complete sustainability and renewability. From a business standpoint, this approach is advantageous as it allows me to leverage the growth of high-quality plants that are already in the cultivation phase. The new plants are expected to arrive in about a week. If the growth rate of the currently cultivated plants doesn’t meet expectations, I’ll be incorporating several of the newly arrived plants into the hydroponics systems. This methodical approach aims to ensure an optimal growth rate and the highest possible yield. I also wish to address the cannabis grower community directly. I hope that my decision to skip the seed-to-plant stage does not cause any offense. My intentions are simply focused on maximizing quality and output, while minimizing our carbon footprint. I believe this approach is in the best interest of sustainability and efficiency, without compromising on the quality that our community values so highly. As we proceed with this venture, we’re currently in the phase of collecting equipment and navigating through the licensing process. To help lower our overhead and assist with consulting fees, we would greatly appreciate any donations, especially in terms of lighting equipment. Your support in this endeavor will contribute significantly towards optimizing our operation and will be deeply appreciated. Disclaimer: Let it also be known I am completely abiding by all state laws, and do not plan on selling any of this current bud. This is for research to avoid future growing "potholes" in the growing part of the business as we have a very small team. My end goal is to help change the current stigma around cannabis and provide a useful service that can help localize and reduce the inflation on cannabis prices in socal by providing a logical supply system. Again I intend on doing all things through the legal route as there is no need to do other wise given the laws on personal use and growing.
Likes
10
Share
@Dunk_Junk
Follow
She's done!! Super, super stinky!!!!!!!! Covered in trichomes!!!!!!!!!!! Will be harvested within 24h.
Likes
50
Share
@AsNoriu
Follow
Day 43. Light is on max output, heat enormous and they RUN !!!! thought intensity will stop them a bit , but i think i do only worse ... We have +30 heatwave in UK, i live in attic , so for 4 more days everything will be out of control. Watered today. 6.3 phed water. I love simple and affordable Mars Hydro products, if you can cope with heat TSL2000 can do magic in your tent ! Will update after heat wave us over. Should be in 4 days back to +20 ;))) Day 45. They GROW !!!! Distance is insanly small, but i have 30 cm of space left, wont move light for a week, then i will try to have 20 cm at least again. Planing last top up, need two more waterings before it, so it should be on last day of this or first of next week. Thinking to take down all LST at that time, need pots to breath better, too thin fabric, they dont keep form. Day 47. Drink every two days !!! 4 liters goes to nothing !!! Huge, still streching, tops almost rubbing TS2000, heat 30 inside, humidity 65-68 ..... will need heavy clearing again !!! Bomb getting stacked !!! Happy Growing !!!!
Likes
28
Share
Will be adding a whole lot of notes to the last couple weeks just trying to get all my harvest pictures up :) This one was a pure treat to grow . I am confident using exotic seeds that they can produce some if the world's best cannabis , hands down . They all were bushes , not too much stretch in flower at all . Usually in the first run with a strain I'm just figuring it all out.
Processing
Likes
7
Share
Likes
56
Share
@Prof_Weed
Follow
Heute startet die 12.Woche,morgen geht es für 2,5 Wochen nach Thailand.. Danach wird das Licht auf 12/12 umgestellt. Musste extrem viele Blätter entfernen, schon das 2.Mal diese Woche.. Das 1m x 1m Zelt ist nun voll mit 1 Pflanze!! Hat jetzt 67 cm Höhe und 1 m Breite, boom.. Licht wurde extrem hochgestellt auf 77cm Abstand, die Purple Lemonade von Fast Buds soll einfach keine Verbrennungen bekommen. Das wird glaube ich ein Urwald wenn ich wieder zuhause bin. Der Stamm hat 8cm Durchmesser, fette Genetik Drückt mir die Daumen! Peace!