my our door girl not filling out as I thought she would I really thought I'd get bigger and healthier plant on the outside instead I got the opposite lesson learned. The mist didn't do what I thought it would so had to pollinate with a Male pink kush plant seeds forming nicely . plant still lovely I'm in love with colors.

Flush time.

Last week of flowering and will be cut !!! Very well formed by dense heads along the branches. I just cut one top of the plant and it gave very good results! I smell the fruit! I have made some flush due to nutrients that i gave during flowering...💪

2026-04-04 So these are the last Pictures of the Permanent Bluez- 3 of 4 Girls are already harvested, another one follows on Monday- she will go into Extracts for a CUP i absolutely had no expectations on thsi Strain- and it just delivered fantastic growing super structured Plants, frosty and fat Buds- delicious smell more in the harvestweek

Ich habe die Damen entlaubt, sie haben es unterschiedlich gut weggesteckt. Sie entwickeln sich super aber im Gegensatz zu anderen Auto eher langsam. Meine Lampe ist auf 75% und mehr wollen die Pflanzen auch nicht! Ich hatte auch kurz LST versucht musste aber aus Platz gründen wieder entfernen da ich sonst 1 Pflanze aus den Schrank holen müssen und das wollte ich nicht weil sie alle gesund und munter sind.

Hello. This is the end of week 6 and the beginning of week 7 of veg. This plant is doing good. Growing well. Gave a 1/2 tsp of - www.wollammo.com - powder for a Cal-Mag boost, and it got lots of other great minerals in it too... Check it out. She's a little dry, so when I'm done here she will get a big drink. She's nice and dark green and liking her food. Hope she's a good one. OK. Have Fun. Chuck.

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

Really don’t have much to say been a real easy grow even tho temps been getting in mid to high 80’s lately I got a jewelers jewel think it’s cheap cause it’s 10X can’t really see the trichomes to well I seen some amber but I’m sure if it’s not cut down this week may23rd it will definitely be cut next around May 27thish

In my experience, mango is a bit hard to to achieve the best looking and tasty smoking buds. I had to do many extra stuff at the end, gave a lot of stress to plants. Fortunately, everything worked out so well, the stress doesn't interfere with the taste much. It smoked very good, hit heavy indica with tropical kush taste. Lastly, Within a control environment with proper knowledge, I did all of these in my whole plant cycle : LST, HST, chiropractic, stem splitting, extreme cold stress, and total darkness.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/15/22 😻Week 5 of veg and things are looking good! I didn't know how I wanted to train these so my husband's suggested we top 2 plants and low-stress the other 2.. I went a little too heavy with their last feeding, no burned tips yet but 2 of them are very dark, we'll be doing water only for these this week..there is some minor discoloration on a couple of the lower leaves nothing major but something we're watching..we'll update again midweek..thanks for all the love Growmies ❤️🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/18/22 Things are good 😺👌..New growth seems to be coming in fast on the 2 plants we topped...much faster growth than we've seen up to this point..all plants seem happy and all have a great color (after working out my slight overfeeding )..we've been running the MarsHydro near the top of the tent the entire grow as a test and its still more than adequate. .we don't have a light meter but we do have some crazy tight node spacing to confirm lol...I still say these plants are a little on the small side but they seem to be growing faster now..I'm pretty sure leaving them rootbound in cups didn't help their development...I think they're finally becoming adjusted to their new homes and we'll see some explosive growth in the coming week 💡🌱... fingers crossed 😺🤞 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 01/19/22 AHHHHHH!!! I DID IT AGAIN!! Kicked my timer power after watering yesterday and put these into about 14hrs of darkness 😥.. lights are back on, hopefully they didn't notice lol.. ah well these things happen and I'm sure they'll be just fine ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Hang Drying 7-14 days before the #TotalDryYields $ #SmokeSesh's! 63rd Day #HarvestTime 9th week of Flower Update of my Fastbuds 2fast4buds.com Genetics looking Great, Gorgeous, Magnificent, Phat and Finishing out Super Strong! I Applied the #AncientArtofStemSplitting for more #FrostedTerpyBuds on 3/19/22 #Trichomes are Ripened and Ready for Steady! #ChopCity is underway! #FadeTime I Can't wait to Blaze Up these Beauties! I started thier #FlushingPhase on 2/23/2022 with Declorinated Tap Water Ph'd-6.0! I #Lollipopped the Lowers on Sunday 2/6/22 after posting to #GrowDiaries They received thier 5th #Feeding of #DivineSeeds #DivineGrow but this is thier 1st #Feed of #LongFlowering 3.0G. Mixed into a Gallon of water, Ph'd to 6.5 on 2/20/22! #BudzForming into Frosted #ChronicColas w/ #PistilsPoppin everywhere looking Pristine!!! I've been implementing some #LSTtraining at the beginning of 10 week's back by bending them over with #PipeCleaners to the sides of thier pots, pulling down thier side branching and #LeafTuckin the Biggest leaves under each other to Expose the Bud site's and Branches to more lighting w/ some #LiteDefoliation 9 weeks back as well! I introduced the #SpinningStemzStrengthing technique a few weeks ago to thier main Stocks and Side branching to make them Stronger and more Sturdy! They popped in under 24hrs in the wet paper towel method and now that they've busted out of thier ProMix potting mix medium, I've been watering them when dry with around 4 cups or 32 fluid ounces 64 Tbsp 192 tsp 948ml of Declorinated Tap water that's Ph'd to around a 6.4-6.3 using TNB ph Up$Down and watering thier whole pots these past couple of weeks! They're Growing under our Bodacious #BloomPlus1500w with the 150w Done driver in our 2×4.5×7ft. GrowTank Grow Closet with the 18/6 lighting schedule cause Everything needs a little rest! Team #Fastbuds recommends the 20/4 schedule as well!!! Our Grows also get Enhanced with #TNBNaturals The Enhancer with my Special Steady'z mix in their bottles! Yo!!! Top-Notch and The Finest in AutoFlowers indeed! Let's Grow and Get it In from Team #Fastbuds @fastbuds_genetics on Instagram!!! Check it Out my fellow Growmies and Growmets! I'm very Thankful, Grateful and Appreciate these Fantastic, Famous, Fast-Growing, Flavorful and Fiery genetics! Spectacular and Superb Sponsorship package from my Broski Sir #Santi as I like call him and thier Award-Winning Company full of Great Growers, Bodacious Breeders and Pleasant People from All over the World! Your Strains are Phenomenally Pristine and Perfectly Priced! I Can't wait to Try, Test and Review these Crafted Cannabis Cup strains!!! Thanks Again Everyone and Everybody! I've also learned All sorts of Growing Tipz, Tricks, Techniques and Methods from you and your Detailed- How to Grow Instructional categories on your Website SeedBank! Your a Fantabulous Family and Terrific Team!!! It's my Pleasure and I'll do my Best!!! With the Help of my Broski #GallowGlas420 making my original Masterpiece's! I Made, Perfected and Hope Everyone Enjoys these New Introductions, Mail Call and Outros! I also Hope that Everyone will and Go Spread That Love to you Guys on your other social media's! I'll most definitely have their Link's posted Below⬇️! BudBrothers4-L!!! Cheers Famz!!! Much Props, Topz and Much Love!💯 https://youtube.com/c/FastBudsGenetics https://instagram.com/fastbuds_genetics?utm_medium=copy_link https://www.facebook.com/FastBudsMedia/ https://mobile.twitter.com/fast_buds https://www.reddit.com/r/FastBuds_Family/ https://t.me/fast_buds_genetics https://es.linkedin.com/company/420fastbuds Remember "it's 4:20 Somewhere"!!! Bloom Plus BP-4000 CA:https://www.amazon.ca/dp/B08DTDP5FF/ref=cm_sw_r_cp_awdb_imm_86Q7H2D5BGFYB9B6PR9K US:https://www.amazon.com/dp/B08DTN3B84/ref=cm_sw_r_cp_awdb_imm_4B7XWCAS09M4V3W0AFJH Bloom Plus BP-2500 CA:https://www.amazon.ca/dp/B08DTCYV9Y/ref=cm_sw_r_cp_awdb_imm_YDNA8G16PH3TB002VKGE US:https://www.amazon.com/dp/B08DS53THM/ref=cm_sw_r_cp_awdb_imm_SX3AEDKRVAYQECF32BE4 Bloom Plus BP-1500 CA:https://www.amazon.ca/dp/B082XYLHRJ/ref=cm_sw_r_cp_awdb_imm_XEBFV7790EHT53B2J9B5 US:https://www.amazon.com/dp/B082XYLHRJ/ref=cm_sw_r_cp_awdb_imm_MB3PYZEVSQRZY096AB79 BloomPlus Instagram Link: https://instagram.com/bloomplusled?utm_medium=copy_link Thanks Again Broski #SmokinPlantaz for Hosting your Bright and Tight Amazon Prime Day #BloomPlus-1500w Giveaway! I'm still Blinded by the Light!!! Lol (Song Pun) it's Ultimately Lit, Extremely Powerful and Brilliantly Bright! I also Love and Appreciate Everyone out here! Please! Go Over and Spread That Love to my Bro's YouTube Channel and Team #BloomPlus on their Instagram! I'll have thier Links posted ⬆️⬇️! BudBrothers4-L!!! Cheers Famz!!! Much Props and Much Pars!💯 SmokinPlantaz YouTube Channel Link: https://youtube.com/channel/UCDKJthWoS6-miAhq_lLb_-w

Preflower went pretty normal. She's a big lady. Week went as expected but I am pleasantly surprised at her size and rapid flowering on this pheno.

What a journey! We started out with a fungal infection or dampening off. Either way, she survived to bring some of the hardest buds ever grown. Very impressed. The resilience of thos one is something to note. Currently the plant is in control of the humidity. But it won't be for very long. Not once the exhaust fan kicks in to max power. The temp is stable at 61° f. Humidity is at 62%. Now 63 and climbing. 🤔. I adjusted it. And it won't stay still. It either plummets or spikes up. A tiny opening in the door dropped it super fast. While closing it up spiked it in the mid 60s. I'm trying to level it out at 55%. The temp is perfect. I should be able to do it. I can tweek it until it works properly. .so I just pulled the roots out of the bucket. I had a whole bunch of goopy shit all in the roots in buried in the pebbles. What the hell is that? I'm trying to find out right now. It was all black and nasty. It smelled like soil. Not strong or anything, but like I didn't use soil. Anyway, I did use carboflush and it turned the water a super dark brown. Maybe that's part of it. Or maybe that was the problem all along. Black root rot? Root rot at all? The roots seemed fine. Just the sludge all in their business. How should I have cleared that out if I saw it? Dump plain water through the hydroton? I think I'll do that for my next run. Once a week top off into the hydroton. Makes sense. It should keep the roots clean? 12/16/2025 Day 1 of drying Papaya Cookies and the environment looks great. It swings a bit, but doesn't go over 61% and I haven't seen it go under 45%. I know it's a big swing, but the temp is solid at 61° and it's in range. I expect it to be a bit more controlled in a few days after the plant dries out a bit. You know, when she has less control over the humidity. The goal is 61° and 53% humidity. I'm pretty sure I can keep it at 60%, but maybe I want 55%. I'm thinking 55% because it's the top of the ideal range and it still matches the temp. So it should I perfectly. So for the setup. I don't think I properly explained it yesterday. The 2x2 is connected to the 3x3 with a 4" duct. You can see in the picture that the hose is installed on the top of the 2x2 and to the upper 6" port on the right side of the tent. There's a reason I'm telling you this. The 4" charcoal filter is on the left side of the tent. If it were on the right side I'd have to attach the dry tent to the left side of the 3x3. The goal is to exhaust the dry tent with the whole 3x3 circulating air throughout, before exhausting the dry tent. Instead of the filter being right above the port, sucking in way too much from the dry tent and neglecting the rest of the 3x3. It makes sense in my head. So far it's seems to be working. The air in the tent has been exhausting just fine. With the 2 circular fans running at level 7 dynamic mode, it moves the leaves just enough and mimics the outside world quite well without any harsh gusts. I wonder. Seeing as though a cannabis plant needs to be pollinated, and it goes airborne, wouldn't having larger gusts of wind help a healthy cannabis plant to grow bigger buds as to catch the pollen? That makes sense to me. Don't overdo it, just a few little gusts just like September and October. At harvest season. I bet that will do something. Maybe I'll turn the speed up to 9 and see what happens. Wind burn on these leaves is the least of my problems. Plus, it'll be fine. Don't you worry. Maybe she'll produce more trichomes and bulk up a bit more. It makes total sense. Without wind burn, just under where it would start to happen, I bet she will finish up nicely and have added a bit more bulk too. 12/17/2025 Day 2: The humidity is bouncy. It stays in range from 46% to 61% I'd like to see it stabilize at 55%, but I don't think I'll see that until I have a bit more control over the space. It's funny. To bring the humidity up when it's low, I open the main tent and the air doesn't get pulled out of the dry tent making it more humid. I open the dry tent a little to drop the humidity. Either way, it's in range and the temp doesn't move at all. It warmed up here for the day and the temp went from 61 to 64 and holding steady. Nothing else to report. 12/18/2025 Day 3 of drying and we are looking great! A lot of her smell has changed to a sharp pungent scent. Meh. I know it's gonna be back to some insanely good smell very soon. After all it's only day 3. I woke up to the humidity hovering around 47% I was kinda hoping it would stay between 50% and 55%. No matter, I added a bowl of water to help keep the humidity up a bit. Hopefully it keeps it under control at 55%. Other than that, nothing else to report. 12/19/2025 So day 4 and I had to add a mini humidifier to the dry tent. It was dropping below 50% and I want it around 53%. The temp is 60° f. So now the humidity is at 54° and is leveled out. I'm guessing maybe 7 days? 10 to 12 days is what I'm going for. The longer the better, but I also have another plant that has to go in there and they won't fit together. The only reason I'm concerned with it is because I'm starting new seeds today or tomorrow. Probably today and I'll be needing the 3x3 in the next week or 2. This little lady will be done by then, but my other plant might have to dry in the 3x3 and that'll take 10 to 14 days. By then the seedlings will be ready for their buckets. Or well, no. They will be ready for their buckets in about 10 days. If not less. Maybe 8 days. I usually add them to the final container just before the roots really start coming in. That way I'm not shocking them too much when they hit the medium.

Aug 9: Mimosa Shot is doing fine. She was slower starting than her wagon partner Sunday Punch EV, but she is liking the warmer weather. Got UV led lights from AC Infinity going today. These are designed for indoor so I can only put them out on nice weather days. Did this last year and seems to work. The UV lights make Edmonton in the fall feel more like California in the summer, or at least that’s the idea. UV is critical for trichome production so it’s a good way to boost THC percentage.

Already flowering, can’t wait 🎆🔮💜

63940000000000000

Increased the amount of nutrients in the feed this week and got a little bit of burn on V, Nemo handled it no problem! removed the yellow spotted fan leafs as part of general defoliation for this point in flower. Continuing to pluck and tuck, meaning removing extra fan leafs (plucking) and bending tallest colas back under the scrog (tuck). shooting to keep all budsights 18 to 22 inches from the light to prevent burn and allow healthy development. I can see where proper distance has been kept best development has occured.

🙊

This week all the plants started to take off in flower. Buds swelling up by the day. Stopped feeding flower burst and added Pk9-18 and advanced meta boost to aid with flowering. Smell has started to increase but not to potent as of yet. EC also increased to 1.6 for increased demand in flower. Also stopped spraying IPM this week as it don't want it to effect the bud smell or taste come harvest.

Man, that plant is really taking off. It's finally starting to look just like the good old Gas House Parent. I can almost smell it already. Can't wait to see how much bigger it gets! Well, another year has come and gone. Yesterday was New Year's Eve, and I want to wish all of you a happy and healthy 2025. May this year bring you all the things you've been wishing for. Let's make this the best year yet!