Hey everyone, sorry I’ve been absent. These girls have been through some sh*t along with me😂 They had a Thrips infestation quite bad. I have been doing a lot of construction in the house and think that maybe was a factor🤷‍♂️🏻 My last harvest was 10/10 absolutely beautiful was missing the bulk towards the end of harvest though, then I found out when I grinder the flower… Hermie was absolutely gutted. There was a few things it could’ve been I suppose it’s part of the learning curve. I saved the best five I could… The girls that seemed almost pest resistant. I topped from 3-5 Nodes just once due to the trauma after ward. Safe to say this has been really stressful for us all I felt as though everything was contaminated so I cleaned everything and went back old school to tent! Glad I did so too. Been experiencing some hot weather recently so both ballasted are on 400W which is fine for now! Keeping feed to a minimal and keeping basic this run. They seemed to have bounced back and all seem healthy showing female sex!!! Hopefully we have a great run I really hope so

This week I noticed a decent increase in height and I figured I should get LST started. I wanted to wait to transplant my ladies, but due to covid, my supply of soil is not here yet, and I can’t fill my 10 gallon pots for the transplant. I looked up online and people said you should be able to transplant the plant successfully by cutting the ties and ensuring you just don’t disturb the roots / medium. I went ahead and got started with LST and I accidentally snapped one of my plants main stems during the process. I mean literally snapped, could see the hollow centres, hanging by a thread of fibre. *so heart broke * I had read online e you can repair it with duct tape and that aloe Vera helps. I did not have duct tape handy but I got some aloe and used the ducting tape that came with my exhaust fan to try to secure it. Fingers crossed it’ll heal If I had some root stimulant I would’ve tried planting it but I don’t have any. I was wondering could that be a form of super cropping? Do you think it’ll just be like a really brutal attempt at topping the plant? Very curious about everyone else’s thoughts on this Pics are attached. Aside from that one my LST went well from what I can tell. I did not train my blue dream out of fear of wrecking my one plant of that strain. I also did not LST one of my mystery caramel due to the stem feeling the same as the one that snapped. The rest I tied down and attached photos can you guys tell me if it looks like I did it correctly ? Would love some feed back. All in all I feel like we are kicking off the week strong. Good growing to everyone

Glad its over. Wont grow her again. Finishes to late for Ontario. Last girl was harvested early due to snowfall. Taste is pretty good. Potency is lacking for me. She will make some good hash though.

And here we are facing a real Queen as the name of the breeder who distributes it. Really beautiful and healthy from the first day now it is at a really interesting point the buds are swelling and the trichomes are already evident the structure is open in a large bush with truly healthy impeccable vegetation.

Well this week we moved all the leaves and stretched out the bitchs em out though.

🍼Greenhouse Feeding BioGrow, Bio Enhancer & BioBloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱GANJA FARMERS

26Jul Made more rectangles. A budsite in 95% of them, too. Flowering really setting in now. Smells! 28Jul Lollipopped more aggressively - could've done more earlier. Took all small shoots that didn't reach the canopy. Managed to fill out 95% of the squares. 29Jul Realized I never un-dimmed the lights after lollipopping... Oh well. LOVE this canopy...

So like at the end of last week can be seen she started flowering. I defoliated her because she was bushy, LST and a little super cropping. I see the tips of the leafs turned down so i didn't gave her any more BioGrow since last week. All is going smooth and kinda fast :D. The humidity in my tent is going up because the wedding cakes are in full flower :D but no problem, I did put 2 small dehumidifiers in the tent and turned the Mars Hydro oscillating fans on almost all of the time. The fans are also new to me because i had cheap ones in the past , must keep an eye out not to give them wind burn :) . In just 12 hours i reduced the humidity from at it's peak 64% to 50% and at times a little lower then that. It is also pretty stable, except like the day i water. I am pretty pleased with that for now 😊. 1/10/25 Because I see a lot of clawing and here and there burnt tips i did a little flush. At the end of flush runoff at PH 6,0 ppm 1050. I like how I can play with the lights up and down to try and create the perfect amount of light for each plant. RH in tent at 48 % and stable. Must keep and eye on because of the flush :D 1/11/25 So 24 h after the flush and she is reaching for the sky. I also see very little improvements or it is a placebo effect :)) Tent temp 23C and RH 44%- 48% . New photos added :D. 1/12/25 After 48h she is reaching and preaching with her branches to the sky :D Happy and growing, developing very nicely. Little Purple calyxes can also be seen at the bases of developing flowers. End of week, in tent RH 50% temp 22 avg. Doing LST once every 2 days or so. Not to often or to harsh but just to show my love

The buds are nice and compact, covered in resin. I can’t wait to try her after a good meal, like a dessert 🤤

I let her go for another week and after checking her trichomes I decided she was done. It‘s not like I had much of a choice anyway as I‘m leaving for a trip in a few days. I cut her down branch by branch, collecting the stalks and fan leaves in one container and the buds in another. After that the buds went into plastic bags which was then put in the freezer. She will now chill for a month while I‘m traveling, before it‘s time to wash and turn her into water hash, and finally into fresh frozen rosin. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– This grow is generously sponsored by Bio Tabs Bio Tabs is an organic growing system that uses slow-release tablets of beneficial microbes, mycorrhizal fungi, and nutrients to create living soil that feeds plants naturally throughout their growth cycle. It’s designed to simplify growing and promoting strong roots, healthy growth, and large yields. Use code GDBT420 for 15% off at the BIOTABS Webshop https://biotabs.nl/en/shop/ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

More details and photos are coming when all buds are dried in about 6-7 days00

Week 13 The temperature has risen and has been high for the past days so I had to dial down the light to it's minimum strength. The plants are getting ready for harvest soon.

F week 4.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/27/21 😻 3rd week and 2 of the Gelato are already showing signs of preflower and there's 1-2 "taco leaves" on a couple but this should clear since dropping room temps (we added 2ml/gal of calmag with last watering just to be safe) ..we're hoping for a lot more stretch before full flower.. no defoliation for these girls but we've been tucking leaves daily...the SP-3000 is an absolute beast in that tent, I can't say enough positive things about this light, we're already excitedly talking about our first photo run under the MarsHydro (only 3 months premature lmao!), we're tempted to get a 2nd and eventually run x2, SP-3000's in our 4x4 (a girl can dream lol)..thanks for reading if you made it this far and happy harvests grow fam!!! ❤️🤘😸 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/30/21 😿🔫 I did it again... our timer was switched from "timer" to "outlet" (probably got bumped) this means the plants have been receiving 24/0..i did this about 9 months ago in our basement tent (twice in 1 year, how embarrassing 😿)...these plants being autos I don't suspect that the extra light would matter however our exhaust system is programmed to shut down 30min after the lights..the plants were probably getting too warm for a few hours every night..this solves our "taco leaf" mystery...I'm so happy we caught this when we did ..a few plants were looking deficient so they all got a small shot of grow (2ml/gal) and guano (5ml/g) solution today, we also added a humidifier..its going to be R&R for these girls and I'll be checking all my timers weekly from now on.. ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

The flush continues, straight tap water. Plant od looking great! Took off some tester buds and drying them. The CM is taking a few weeks longer in flower, looks like it will be another week. I am not surprised at all, this one was on the outside edge of lights. All in all it is doing very good under the circumstances. Freed up some room and now moved it directly under the lights for it's last week or so. Thanks for looking

This one I smoke alot b4 final weight. I really like this plant. Maybe I will grow again in future and do a sea so green.