I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

It's starting to get cold so i turn the other 120w led, 250w in total and hanged about 1.6 m away keep watching how they respond. As far for watering i only spray the soil when ever it gets dry with tap water. Update; They love the light and start to pray just a bit. At this point i give them 100 ml water every few hours. my humidity about 40% with the humidity dome on. One of them is stunned i keep her for now

Great harvest, I was impressed with the quality of this strain. After the drying and curing process, I'll give my feedback! 💪

At the beginning of week 4, the Wedding Cheesecake was flipped to a 12/12 light cycle, to which it responded with the first fine white hairs by the last day of the week. Water consumption has increased to approximately 500 ml per day. Nutrients were supplied in two doses: initially with an EC value of 1.7, and in the middle of the week with an EC of 1.4, which was the first time flowering fertilizer was used. Training focused on aligning the four main shoots using LST. The lighting is now at 70% - 75% (approx. 450-500 PPFD). In terms of climate control, the exhaust fan has been running continuously on a low setting for several days now, with an external dehumidifier stabilizing the climate in the room where the tent is located. The VPD value is now being continuously increased. The stretch will be the exciting topic in week 5.

This grow my second run and I done very hard work and now I'm proud off myself this run I have 6 auto and all so healthy honestly this run plant are double is size then last run so I'm so so happy I learn alot from all friends grower much appreciated everyone read my diary Today day 29 she start preflowering lots off branches and still don't know what strain she is!!!anyone know???? This week I'm going to feed her 1ml silica 3ml grow .5 ml calmag 1ml bloom .2 big bud I'm going to keep do lst on her till next week not much to do this week

So only 2cm vertical growth this week..... But she got a lot bushier!

Bitácora de Germinación – Punto Rojo V2 Se inició el proceso de germinación de semillas de cannabis sativa Punto Rojo, una genética con historia en nuestro territorio que vale la pena preservar y entender desde el cultivo consciente. 📅 Fecha de inicio: 29/03/2026 🌿 Cantidad de semillas: [10] Materiales utilizados: Semillas Toallas de papel Recipiente con tapa Aspersor 📌 Se inicia el proceso asegurando condiciones limpias, humedad controlada y temperatura ambiente constante. Este punto es clave para activar la vida dentro de la semilla. 💧 Se humedecen las toallas de papel con el aspersor hasta dejarlas húmedas (no empapadas). Se colocan las semillas entre las capas de papel dentro del recipiente con tapa, generando un ambiente estable de humedad y oscuridad. 🤝 Gracias a quienes valoran y preservan las genéticas locales. Cultivar también es recordar de dónde venimos.

End of week 2 flower. I moved her into the larger grow space & she is HAPPY!!! Stacking up nicely and taking over the new space. She smells wonderful.

Would def recommend this one to beginners. She jumped around a bit on the run off PH and EC levels but mostly was a pleasure to grow.

Week 16,.. neglected the diary but they have been tied up to hold the weight as we're falling over, fed properly, looking ok, the bigger one has a bit of yellowing not sure if that's just because nearing the end but yeah, looking forward to getting them down tbh, didn't quite expect 16 weeks and still going, roll on next week

Plants are getting put on 12/12 now while I hold some back for cuttings and to veg out more

Que pasa familia, vamos con la segunda semana de vida de estas Wedding Cheesecake Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. Vamos al lío , las 2 plantas se colocaron en macetas de 0.6 litros y asomaron 2. El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%. Esta próxima semana realizaré el trasplante a maceta definitiva, iremos viendo cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Fastbuds seeds LSD-25 auto #2 Only using spring water for first week and spraying with foop mist every night. Going to be using foop nutrients with Humboldts secret cal/mag and nectar for the gods ph up and down. Here we go!

Básicamente lo mismo, aunque está semana pilló bastante más horas de luz(tuve que irme fuera de casa dos findes seguidos, en los cuales la dejé con la luz encendida full 24/7 en la caja) Como experiencia utilicé café reposado 48h para "alimentarla" e intentar bajar el Ph de la tierra (coco ph6+hummus ph7+vermiculita ph8= ph total 7) El otro experimento fue cubrir la tierra con coco para que el tallo eche raíces y aprovechar su espigamento! Las horas de luz solía dejarla 8h en bombilla mientras duermo, y el día la pongo en la ventana a que tome el fresco, pero apenas tiene luz directa, me da la sensación que crece más rapido cuando vuelvo del finde, estoy replanteandome tenerla más tiempo en la caja con luz, porque la veo aún pequeña, y quizá ponerle un ventilador de pc o algo🤔..veremos, aún tengo el papel de aluminio al lado de la caja y ni se lo he puesto, con eso os lo digo todo☝️🎃

So we’re at the start of week at 10 and both plants are coming along nicely. Pheno #1 has swelled considerably over the last 2 weeks and she has packed on some serious weight. Pheno #2 is a little behind but unfortunately I will have to chop her early as I have to dry in the tent that I grow in. Will be chopping both plants in a few days. Update Day 67: Both plants have been chopped and hung. They’re taking up 2 rows of across my grow tent. Going for a nice slow dry with temperatures sitting at 65F and humidity sitting at 60%RH.

Forgot to record last week (due to being too high) but here’s week 4 they seem to be doing great😄.

Day 22 22/07/24 Monday Nothing new to report. Starting to see them beautiful fans appear that's all 😁✌️ Day 23 23/07/24 Tuesday Feed today, giving them straight all nutes Inc flowering nutes. I will update the dose as they grow and develop a bigger hunger. (Not sure what's wrong with Overdose #2, bit mutated, we'll see how she gets on 😅) Video updates 👌💚 Day 26 26/07/24 Friday De-chlorinated watering pH 6 with 5ml calmag to 5L water. Watered each with 250ml and had small run off. I will continue to feed/water with small run offs to help prevent salt build ups. Video update.