So she got hit with some fricken bugs pretty bad and I tried combating them and in doing so I ended up stunting her quite a bit or I think my buds would be 2x the size. Thats alright though I should still end up with a good amount of golf ball sized buds. They really started packing on the trichomes since I moved her into a much sunnier area so I think the quality will catch up just not the size. All in all I'm happy that I am going to at least get her to harvest!! I will be using neem seed and some other biological methods next season so I won't have to spray any of my plants with any pesticides or fungicides. The ones I saturated with flower shield and organishield didn't like it very much and it ended up stunting them for up to 3 weeks which really sucks considering I'm gone on for the next 2 weeks and will need to pull everything before I leave whereas if they hadn't of got stunted It would have been in the exact time frame I needed them to be before I leave....sigh

It's not exactly how I expected it to be, explosive... but it's not bad either, we'll see, we're here, we're following, I hope that RF3 will have coverage for its story... I'll do my best 🍀

hi to all, brothers and masters of weed. my queens are really strong !!! I started with the flushing for these little girls who have started to turn purple .... the smell is very strong and it is really AMAZING The buds are literally covered with powerful glue that just touching them release a strong and pleasant smell .... I think I will not throw anything from the waste because every corner of the plant is covered with sparkling and powerful trichomes with which I hope to make good hashish I leave you wishing you a happy and abundant harvest for all of you see you around

1.28.26 Chop day Removed big fan leaves. put all 4 plants to dry at 60rh, 17c AC. Controlled by an inkbird controller connected to humidifier and exhaust fan with a fan in the tent for air circulation always turned on. 2.8.26 Finished trimming all the buds

This bush is a beast. Take a look at her stem. Monster. So many leaves!! 😲 On she goes!

-5/14/23 Start of Week --Week 8/Flower 2 -5/17/23 (Day 60/Flower 11) --Observations: still getting clustered with shade leaves, Stigmas are growing in number and gaining size. --Changes: started spraying with Build-a-Bloom once a day --Comments: nutrient spray should help with pre-flower creation, still not putting nutrients in watering. still not removing anything until the end of next week, then defoliation of shade leaved will be done to open up space for all the branched to do their best. -5/20/23 (Day 63/Flower 14) --Observations: pre-flower is coming in nicely, sent is starting to change --Changes: started spraying twice a day with Build-a-Bloom, moved closer to light (26 in) --Comments: starting to get a sent but it is faint, noticed when I was manipulating for photos. The sent is like foliage and lemons, could also partially be do to the lemon basil. changed location under the light making it more in the middle and lowered the distance to the light. got some WWE action figures and what I think is a G.I. Joe action figure from a friend to use for a photo contest, also took video for this week with them. -5/20/23 End of Week

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Sweet Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! ALLUCINANTE DA UNNA CIMA SULLA FOGLIA E' NATO UN RAMO DI CIME INCREDIBILE.. Davvero un piacere coltivarla. Grazie a tutti per il supporto ❤️🍀🔥

Okay.

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Finally we are done, I spent one 10 months on Durban Poison, this is my best sativa strain and im absolutely in love. So next report will be with some Clones of Durban Poison.

🍨🍧🌈🍭🍬 Pheno B is more candy gelato terps smell & taste🍨🍧🍬 Pheno A is more butter candy bread terps smell & taste 🍞🥐🍬

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Tropicana Cookies by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for the outstanding, award winning strain from my friends at FastBuds... Tropicana Cookies Auto: I'll be running Tropicana Cookies Autoflower which is a 60/40 Indica/Sativa Hybrid. "Tropicana Cookies Auto is the perfect variety for growers of all levels, especially beginners as this strain performs very well outdoors and indoors, and can produce up to 500 gr/m2 in 56-63 days without needing extra maintenance. Reaching up to 110 cm, this strain grows fairly tall with medium-sized branching, showing its mixed heritage. Definitely the right choice for those with a high tolerance looking to get their hands on the strongest autoflowers out there. You can expect an extremely powerful and long-lasting high that’ll boost your mood and give you that extra push you need to start your days on the right foot. This variety offers the whole range of citrus and woody flavors with a strong candy-sweet background that will keep you coming back for more and more."* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •DL Wholesale Root Royale Coco Lite 70/30 coco/perlite •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/15- Here we go into the second week of veg for the FastBuds Tropicana Cookies and these little ladies need some serious TLC! I have the AirCube system set to 'Automatic Feed' now with two feeds per day for 15min. each. I'm checking the reservoir PH and EC before each feed as I'm still getting a PH climb due to the large air stone I have in the reservoir, and I want to keep my ppm's in the 600-700 range. So far, so good with the increase of nutrients. It looks like they are all beginning to get their color back, albeit slowly. 10/17- The Tropicana Cookies continue to be fed twice daily at 7am and 9pm, which works out to three hours AFTER lights on and six hours BEFORE lights off. So far this is working well with the medium having ample time to drain between feedings. I can see a noticeable difference in their color now, especially in the #1 plant. The #2 plant has a pair of lower leaves that are pretty damaged and I'll do a 'surgical' removal of them soon. the #3 is looking the best of the group, but the other two are on the rebound now. I'll have to wait and see how much this problem affects the plants growth and flowering and hope for the best! 10/19- I've got the AirCube system dialed in now and my little ladies have made a dramatic comeback! I've upped the nutrients to 650ppm's and am running the PH at 6.0-6.2 @ 74℉. Tent temperatures are running 73/80℉ during lights off/on, RH is being maintained @ 65%, and co2 levels at 1150-1300ppm's. I upped the output of the HLG 650R to 65% via a TrolMaster Hydro-X Controller, and have it hung 28" above the plants. Today, I drained and cleaned the reservoir and 'brain bucket', then refilled the system with 60L of well water to which added the following: 100ml each of Plagron Cocos 'A' & 'B', 30ml of Plagron Power Roots and 45ml of Botanicare CalMag+, and 3 tbsp. of Plantonics Amino Bliss amino acids for a final level of 650ppm's. I then checked the ph and adjusted to 6.0 @ 74℉. I have also set the GrowAce AirCube system to 'Auto' mode and have it set for three 15min feedings a day, six hours apart, beginning two hours after 'lights on'. 10/21- There goes three weeks from seed on the books! All three Tropicana Cookies are looking really good now with great color and vigor, and I'm primarily concentrating on maintaining a consistent environment in the 4x4. The three times a day feeding schedule with Plagron nutrients ( Cocos A & B, Power Roots) continues @ 650ppm. I am also checking the reservoir before each to monitor and adjust the PH and nutrients when needed. I have noticed that after each feed the reservoir PH climbs 0.9of a point to 7.0, so I have been adding 30ml of Safer Grow PH Down which brings the PH down to 6.1. 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

Ya se empiezan a notar los cambios despues de aplicar LST , dejare que las ramas aunmeten su grosor y despues se pasara a floracion y se cambiara el fotoperiodo

She recovered and keeps bulking. Loud smell 🗣️❄️

* Actualizo 2 dias antes para cuadrar diarios. Gracias al equipo de MSNL y XpertNutrients sin ellos esto no sería posible. 💐🍁 Forbidden Fruit Auto: Forbidden Fruit Autoflower, llamada así por sus deliciosos sabores, es un cruce entre Cherry Pie, Tangie y Siberian Ruderalis. Esta variedad ofrece efectos estimulantes y relajantes con un sabor afrutado, cítrico y a pino. Ideal para quienes buscan un dulce escape. 🚀🌻 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 4: Continuamos la etapa de vegetación, ella se desarrolla muy bien 😎, comienza el buen tiempo, temperaturas agradables para todos. Esta semana se aplica una solución de trichodermas para una mejor adaptación aunque realmente va genial. Se mantiene 1/3 de nutrientes Master Root y Master Grow

Week 14 for Gigi! Six weeks of flowering. Ok now we are talking! Buds are fattening up and trichomes are starting to get very milky, I want to try to take a picture of them really close but I don't know how. If someone in the community knows some good instruments for taking trichomes pictures please let me know. 🙏 However, Gigi is doing well and I think I'll flush her in two weeks or maybe the next week, we'll see. Day 92: watering with all nutrients. She drinks a lot, almost 2 lt every 2 day. Day 95: some leaves are turning yellow, I think maybe I've overfert her or it's just a ph issue. I need to check it. Day 98: watered with only pure zym and a little silica. Cutted some leaves. See ya next week guys!