4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

A few of the autos have mostly milky trichomes but no amber yet. Maybe another two weeks.

Easy for grow, If you haven't tried this strain. You should hurry and buy the seeds. A link for buy 👉🏻( https://2fast4buds.com/ )

Reported her to final pot Used old soil from last year’s

Meine Woche ist finde ich gut verlaufen sie findet sich langsam zurecht in dem größeren Topf. Ich hatte zwischendurch das Gefühl dass sie nicht richtig an wurzeln dürfen dass sie nicht richtig trinkt aber scheinbar funktioniert es doch alles ich habe auch hier wieder die neue Lampe mit bei und ich denke deswegen hängen die Blätter ein wenig weil es jetzt eine Umstellung ist und diese Lampe sehr viel mehr power hat als die vorherige heute habe ich auch wieder Enhancer benutzt die untersten Blätter werden langsam schon gelb weiß jemand was ihr fehlt.

Hey all sorry for the late update. Got really busy with work and just wasnt uploading. I had to cull phat Gary cause she was a genetic herm, I’m talking pollen sacks all the way up the main stem. I’ve seen a few stress sacks here and there on the lowers but nothing like this. I added a video of it so you might know what to look out for. It’s my first experience with exotic genetix and while I have heard of them having herm issues before, I have never had anything quite like phat Gary. But, on the other hand, this Gary Poppins #2 is the best smelling plant I’ve ever had. She smells like a straight strawberry soda, just this very fizzy strawberry scent. It’s unreal. Gary Poppins #1 has a similar terp profile, but not as loud and she’s frosty as ever. Both the perm marker s1’s are identical. Both look exactly like the perm marker flower I’ve bought from seed junky in the past. Very lime green buds with light oranges hairs. Smells just like a permanent marker. Couldn’t be happier with how this run is going, well except Phat Gary. Still haven’t decided on Exotic Genetix yet. I guess we will wait and see how Blueberry Gary comes out, she’s currently in week 6 veg. Shout out to the mad scientist Jbeezy though, this perm marker is unreal. When I saw he was releasing s1’s I couldn’t believe it. Gonna wash this entire run for some fresh frozen. I would absolutely love to get this Gary Poppins #2 smell to transfer to some live rosin. Will update this when we finish and I’ll make a diary for blueberry Gary and Gastro pop from compound genetics when I get a chance. Until then, happy growing all Day: 52F - Week 8 🌡️:79 Fahrenheit 💦:50% 💡:75% @ 14 inches

So it is a new week and so far so good, this seems not to get my best grow, but the Zillions and Cookie Casket are developing good, Mimosa Evo is still a bit behind, but starting to get back into the "race". So far so good. PH 5.70 in the tank with EC 1670.😅😅😇 Edit: Raising EC to its peak of 1832 in the tank with PH 5.70 Edit: Now it is time to clean the tank and hoses from bacteria. Because of continous PH- drift, I have already setup a new tank with only Minearl fertilizers and Purolyt to clean the system for 3-5 days from bacteria. This is the normal consequence of using bio- adds in an autopot- tank system with airdomes. For bio- injection I will use hand watering from top twice a week, yes from the top in an autopot system. I designed an oCoQ- bio- injector in order for being capable of doing this! 😇😇

:)

5/2 she's finally tall enough to spread out and she's looking so fucking good. She's showing sex but I don't think its flowering 5/31 the main stem of this plant is crazy. The branching is abnormal and I can't wait to see what it does.

Struggled keeping humidity up I think it’s my filter but I don’t know. Tried most tricks in the book and had to invest in a humidifier ( not the best either). I know it’s frowned upon to use foliage spray sometimes as it can cause mould/light burn but my humidity levels are some what in the middle

Estamos terminando la 2ª semana de floración, hoy es 17/03/23 y las plantas llevan 55 días desde que se empezaron a germinar. Al final he hecho una segunda defoliación por que veía muchas hojas, muchas formaciones tapadas y alguna rama bajera que no le daba la luz. Así que he sacado plantas, las he pelado y las he vuelto a organizar. Se quedan así hasta el final. Les voy a ayudar poniendo una malla de scrog para ayudarlas a soportarse. Uso la gama completa de nutrientes, Boom nutrients Están bajo la luz del panel LED 780W ResinX de GBLIGHTING

48 hrs. of dark are up and its time to chop. pots have dried from the last flush. These did not stretch as much as I would have liked I will have to adjust my light better next time and there was a lot of lower development near the media, hence not enough air flow. when I flushed the pots the water level went up to the lower growth on the Think different and the bottom was wet and rotted the bottom half. I did a mild lollypop on them I'm early flower it just was not enough, LESSON LEARNED. Chopped on 2/8/20 whole plant drying low and slow 54% RH 68F for 10-14 days then will trim and jar. 981 grams wet with the lumber. lets see how they dry. I got a rosin press coming today I will squeeze all the trim and larffy buds into dabs yummy! All in all I recommend these genetics I will try the think different again I'm sure I just got a recessive dwarf gene. I have seen other grows of this same strain same breeder that are huge and stacked. thanks again to Fast Buds 420 and Green Buzz Nutrients for suppling the goods for the grow. Stay tuned for the harvest pics and vids along with the rosin squish. Be cool to one another we could really use it these days.👏 please fell free to comment on the grow as this is my first true auto flower grow. If any one out there is experienced with rosin pressing and you have any tips for beginner's let me know I will incorporate them in the next videos. thanks

Day 58: Chopped 1 other day, Chopping others tonight and tomorrow. Trying dark period with other plants

Ein minzig, süßer Duft und traumhaft schöne Buds! Ernte steht auch hier die Tage an. Bin sehr auf die Enwicklung im Glass gespannt.

Day 8 - First official day of veg and both ladies are looking good and on schedule for a couple of changes. Nutrients: 10ml of Hydro A & Hydro B were added to both buckets (10L of water in each bucket) PH: the Milwaukee PH controller was set to work - starting at a PH of around 7.6 - 7.8, it slowly worked down to a perfect 6.0 over about 50minutes. Lights: The lights were readjusted to be 60cm from the seedlings who are all between 8-10cm tall and the intensity of the lights were increased to about 70% brightness. Day 9 - Both plants are taking nicely to the adjustments and I am happy with the progress. Temp and humidity are stable and PH is controlled. Day 11 - The second nodes are clearly visible today for both Chong and Max which would hopefully put them at 3 nodes by the end of the week - right on schedule! Day 13 - The ladies seem to be showing some signs of heat stress, so thinking about adjusting the lights after their period of dark today because they are due to be adjusted tomorrow anyway for the new week of veg

Everything is going well. Not much time to look after these ladies, new grow room is nearly complete. Look out for a new diary coming soon!

Another week of rain storms! She was a trooper and stuck through all the wind and rain! Starting to see some good secondary growth from the LST. Shes bushing up so quicly, so i removed some more big fan leaves that were blocking some sunlight to the middle of the plant.