Likes
Comments
Share
@Growshh
Follow
The top dress from last week is working nicely. Everyday watering with brix, green aminos, calmag and silica. 2 of the Blueberry Cherry are ultra blueberry phenos. 2 black patronus are very sherbsy but one is ultra sherbs
Likes
13
Share
The Blue Dream is a good deal slower in growth, but still develops quite well. Otherwise, the plants are not pruned any further before they start flowering.
Likes
2
Share
Hi liebe Community and Welcome Back! 💚🌱 We proud to present the second Strain from Good Times Genetics! Die Wuchsform der Pflanzen wirkt bis jetzt sehr homogen, es ist zu beachten, dass natürlich die einen etwas schneller wachsen, wie die anderen. Auch die Stielbreite unterscheidet sich etwas. Insgesamt wirken die Jungpflanzen allerdings sehr kompakt, was eine gewisse Indica Dominanz vermuten lässt. Das ist auch so gewollt. Ich werde immer wieder verschiedene Pflanzen der gleichen Zucht dokumentieren und nach der Geschlechtsbestimmung dann Herausfiltern, welche zwei Pflanzen für die Fertigstellung des Diaries in Frage kommen. Die Wachstumsbedingungen im Growzelt sind weiterhin am Optimum und Stabil: ——————— 🌞 Temp: 23°C 🌚 Temp: 20 °C 💨 RH: 58% VPD: 0,86 kPa 😎PPFD: 330 mqm ——————— Stay Tuned! 💚
Likes
11
Share
I'm very happy with how my plants turned out and can't wait to get going again. They're now hanging in my tent so hopefully dried and ready to trim by Christmas day at the latest. I will update on weight when dried and on the smoke when cured.
Processing
Likes
13
Share
We add here the videos and pictures of the last 2 week's, because of problems with the app we are slowly getting videos and pictures uploaded, please follow our YouTube channel for the full Videos. Epical widow the two are getting ready to blooming and the Epic Spigol Field is also after the topping and L.S.T. getting she's nails out and big cola's are growing.
Likes
11
Share
@cadur
Follow
Very cold here 10oC, not much I can do as maxed out on the heating. Plant not the happiest but in we go
Likes
23
Share
In to week 7 now starting to flush!! Very impressed with this run 💚🌱💚🌱 I’m now running the Futur vert 30 W uv led for 5 hours of the 12/12 with the Futur vert flora max series
Processing
Likes
8
Share
@Max1973
Follow
Day 49 - lookin good..... been bending her, trimmin abit, messin with the water solution..... ph and ppm have been all over the place..... lol she's been transitioning from grow to flower, and once she settles into night mode, the solution and growing should stabilize...... the new fan is cool... tents working properly now, neg pressure, drawing in air behind the floor fan, blown around the bottom, and cpu extractor fan pushing the air out the top of the tent, straight into the filter..... really nice way to run a little tent, low airflow........ keeps the impurities out of the buds..... the stalks have all tuffened up since trimmin, and pretty strong now.... should hold the full weight that's about to occur all over the place...... i've simplified the nutrients, they were gettin alittle confusing, so started doin nuets differently, .... so, just making my own nuet solutions, nothing fancy just base amount of normal elements .... should be a pretty good christmas ...... Day 51 - pics/vids... 👍😎
Likes
44
Share
Bannandaddy auto by ethos genetics it is a brilliant plant a bit small but 10/10 buds, smell like redbull lol
Likes
12
Share
@L_Choppa
Follow
I don’t know what’s going on with my big girl I think is wind burn by me increasing the airflow I’m thinking it’s windburn well anyways I don’t know if it’s budrot cause I really want to chop thoses two tops off just incase help anyone if you know what this is
Likes
51
Share
@Tower84
Follow
🇩🇪 Cherry Limeade von Doja – Wochenkommentar Die Cherry Limeade von Doja steht weiterhin richtig gut da 🌱. Das Blätterdach bedeckt die 60 × 60 cm mittlerweile ziemlich ordentlich, auch wenn hier und da noch ein paar kleinere Lücken zu sehen sind 🌿. Insgesamt bin ich mit der Struktur aber sehr zufrieden. An Tag 20 habe ich dann den etwas schmerzhaften Teil erledigt ✂️. Ich habe die Pflanze gelollipoppt und alle Blätter und Blüten entfernt, die im Schatten lagen. Das entfernte Pflanzenmaterial habe ich direkt wieder als Mulch ins Beet gegeben ♻️. Ehrlich gesagt tut mir jede größere Entlaubung ein bisschen im Herzen weh, weil die Pflanze danach gefühlt nur noch halb so groß aussieht 😅. Aber diesmal gilt ganz klar Qualität vor Quantität 🎯. Ich möchte möglichst ausschließlich große Top Buds produzieren, die während der gesamten Blüte ausreichend Licht bekommen ☀️. Eine interessante Erkenntnis hatte ich diese Woche auch beim Tensiometer 💧. Ich musste feststellen, dass das Manometer offenbar etwas hängt. Durch leichtes Klopfen bewegt sich die Nadel wieder und zeigt anschließend einen anderen Wert an. Rückblickend hatte ich wahrscheinlich gar keine zu niedrige Saugspannung / hohe Bodenfeuchtigkeit – die Pflanze hat sich schließlich optimal entwickelt 🌱. Das Problem lag vielmehr darin, dass das Tensiometer teilweise falsche Werte angezeigt hat. Zum Glück habe ich mich zusätzlich immer auf die Fingerprobe und vor allem auf die Entwicklung der Pflanze verlassen 👆🌿. Dadurch ist trotz der fehlerhaften Anzeige alles gut gegangen. Ich habe das Tensiometer nun herausgezogen und komplett neu mit Wasser befüllt 💦. Allerdings muss ich das Manometer weiterhin leicht anklopfen, damit sich die Nadel zuverlässig bewegt. Mein Ziel bleibt bei etwa 120 mbar Saugspannung während der Blüte. Heute gab es außerdem 3,5 Liter Almicanna Flower Komposttee 🌸. Der Tee wurde zuvor insgesamt 48 Stunden unter Belüftung gebraut und durfte anschließend ins Beet 🫧🌱. Jetzt heißt es erst einmal zurücklehnen und der Cherry Limeade beim Aufbau ihrer Buds zuschauen 😎. Nachdem sie sich in den nächsten Tagen von der Entlaubung erholt hat, werde ich die Lichtintensität schrittweise auf 1000 PPFD erhöhen ☀️. Jetzt beginnt für mich der wirklich spannende Teil der Blüte – weniger Training, mehr beobachten und hoffentlich viele schöne, dicke Top Buds 💚🌸. 📊 Parameter der letzten Woche: 💡 Licht: 900 PPFD / DLI 39 (12/12, Stufe 6, 40 cm Abstand) 🌡️ Temperatur: 27 °C 💧 Luftfeuchtigkeit: 66 % 📈 VPD: 1,2 kPa 🌿 CO₂: Ø 550 ppm 💦 Bodenfeuchtigkeit: 120 mbar 🇬🇧 Cherry Limeade from Doja – Weekly Update The Cherry Limeade by Doja is looking really good 🌱. The canopy now covers most of the 60 × 60 cm tent quite nicely, although there are still a few small gaps here and there 🌿. Overall, I’m very happy with the structure. On day 20, I had to do the slightly painful part ✂️. I lollipopped the plant and removed all leaves and flowers that were sitting in the shade. Instead of throwing the plant material away, I added it straight back to the bed as mulch ♻️. I have to admit that heavy defoliation always hurts a little because the plant suddenly looks like it has lost half of its mass 😅. But this time I’m clearly going for quality over quantity 🎯. My goal is to produce mainly top buds that receive plenty of direct light throughout flowering ☀️. I also discovered something interesting with the tensiometer this week 💧. The pressure gauge seems to be sticking slightly. A gentle tap on the gauge makes the needle move again and reveals a different reading. Looking back, I probably didn’t have excessively high soil moisture at all – the plant has been developing perfectly 🌱. The problem was simply that the tensiometer was occasionally giving me inaccurate readings. Fortunately, I also relied on the finger test and, most importantly, on how the plant itself was developing 👆🌿. Because of that, everything worked out despite the faulty readings. I have now removed the tensiometer and refilled it completely with water 💦. However, I still need to gently tap the gauge to get the needle moving reliably. My target remains around 120 mbar soil suction tension throughout flowering. Today I also gave the plant 3.5 liters of Almicanna Flower Compost Tea 🌸. The tea had been actively aerated and brewed for a full 48 hours before being applied 🫧🌱. Now it’s time to sit back and watch the Cherry Limeade build those buds 😎. Once she has recovered from the defoliation over the next few days, I’ll gradually increase the light intensity to 1000 PPFD ☀️. The really exciting part of flowering starts now – less training, more observation, and hopefully lots of beautiful, chunky top buds 💚🌸. 📊 Parameters from last week: 💡 Light: 900 PPFD / DLI 39 (12/12, Level 6, 40 cm distance) 🌡️ Temperature: 27 °C 💧 Humidity: 66% 📈 VPD: 1.2 kPa 🌿 CO₂: Avg. 550 ppm 💦 Soil moisture: 120 mbar
Likes
4
Share
@AustinRon
Follow
OG 4Q24 Flower Week 10 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Feb 12, 2024 CR2 4Q24 64:F:9:1] End of Week: [Tue Feb 18, 2024 CR2 4Q24 70:F:9:7] OrangeGasm Fertigation: - MAX: EC: [ 1.6, mS] - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ __ Wed Feb 12, 2025 OG 4Q24 64:F:9:1 Refresh Reservoir - Amount: [ 5, gal] - EC: [ 1.6, mS] - Primer A&B: [ 48, ml] - SLF-100: [ 15, ml] Reclaim Dehu - Amount: [ 4, gal] EC: 1.6 Runoff - Amount: [ 1.25, gal ] - EC: [4.3 , mS/cm2] - EC∆: [ 1.6 , mS/cm2] # Danger!!! (I don’t think so - Happy Plants) __ Thu Feb 13, 2025 OG 4Q24 65:F:9:2 Runoff - Amount: [ 2, gal ] - EC: [ 4.6, mS/cm2] EC: 1.5 Refresh Reservoir - Amount: [ 2, gal] - EC: [ 1.5, mS] - Primer A&B: [ 32, ml] - SLF-100: [ 10, ml] Reclaim Dehu - Amount: [ 2, gal] If we see the pistils of the last two plants shrink/collapse in the next 3 days, we may be ready Tuesday/Wednesday . . . I also note we’re about 2 days after from OPTIMAL BUD Structure, Foxtailing is becoming less well formed at largest top and some of the sooner ready buds … __ Fri Feb 14, 2025 OG 4Q24 66:F:9:3 EC: 1.4 1.5 gal dehu 3 gals+ refresh Reduced Fertigation Time 50% as Tank is at refill after 4+ gal yesterday, again. :-{ __ Sat Feb 15, 2025 OG 4Q24 67:F:9:4 Reclaim Dehu - Amount: [ 2.5, gal] Refresh Reservoir - 2 Gal - Primer A&B: [ 17.9, ml] - Resin Bloom: [ 9, ml] EC: 1.3 Runoff - Amount: [ 0.5, gal] - EC: [ 3.0, mS/cm2] - EC∆: [ 1.7, mS/cm2] __ Sun Feb 16, 2025 OG 4Q24 68:F:9:5 Refresh Reservoir - 2 Gal - Primer A&B: [ 16.5, ml] - Resin Bloom: [ 8.3, ml] Runoff - Amount: [ , gal] - EC: [ , mS/cm2] - EC∆: [ , mS/cm2] EC: 1.2 __ Mon Feb 17, 2025 OG 4Q24 69:F:9:6 EC: 1.1 __ Tue Feb 18, 2025 OG 4Q24 70:H:9:7 1000 - Remove Plants from Tent - Remove Drip Tray - Remove Light - found water unseen in bottom tray - the reason for unreasonable humidity - Removed Drip Rings - Dried bottom drip tray - Resealed Tent - Low RH _______________________ Harvest Log Max Min Average Height (in) 40 21.5 29.875 Weight (g) 700 157 385.5 Secondary Stem Count 30 17 21.125 Est Dried Trimmed Wt 140 31.4 616.8
Likes
116
Share
@GMSgrows
Follow
What was it like this week? It was irritating. This site is sucking. Upload a vid that takes so long to upload to just have the save sign spin and spin. Then have to reupload. Your admin sucks the bag.
Likes
17
Share
Well, we already know she's a grower. Check the difference in the pictures, first ones are the beginning of the week and last ones end of the week. They're definitely comfortable, I can notice the roots taking over the soil and the leaves are branching out which is great to see. Next week they'll be transplanted to final 11L fabric pots. Happy Growing!
Processing
Likes
17
Share
@kcartel
Follow
good flowering, everything is stable, a lot of inflorescences appeared this week, next week it is planned to remove the lower leaves. We had to tilt two branches from the middle, as they stretched out very much and there was a risk of burn, we are waiting for 7 weeks!
Likes
16
Share
**Update** 96.5 grams dry from 1 Autoflower! Amazing smells, still has some of the 🍈 funk. She needs to cure to let the Terps and Flavors come out. She is still very sticky and resinous. Will update once a week or two of cure is done, but with the 1 joint I smoked, full heavy hitter, body buzz and heavy head high. Looking forward to the finished product. This plant flourished with little work on my part. Good nutrients, and not being too hands on let this beast do her own thing. I would definitely recommend as a beginner strain/auto flower to go with, she is easy to see through to the end. Didn’t really need much attention until flower came on and she fed hard for phosphorus and potassium while she stacked. I’ve got some of her cousins already sprouted and am looking forward to trying some different techniques to see what she can do! Happy growing all 🌱😎
Likes
4
Share
Die letzte Woche meiner Apricot Auto ist geschafft – heute war endlich Erntetag! 🍑✂️🌿 Nach ihrer kompletten Outdoor-Reise wurde die Pflanze heute geerntet und in einzelne Äste für die Trocknung zerlegt. Erst auf dem Trockengestell wurde richtig sichtbar, wie viele Blüten sie über ihre zahlreichen Seitentriebe produziert hat. 😍 Besonders schön sind einige der kräftigeren Buds und die teilweise dunkleren Farbtöne zum Ende der Blüte. Jetzt heißt es nur noch: langsam trocknen, geduldig curen und abwarten. ❤️ Das finale Gewicht sowie Aroma, Geschmack und Wirkung folgen nach dem Curing. 🍑 Apricot Outdoor 2026 – HARVESTED! 🌿✂️🔥 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- The final week of my Apricot Auto is complete – today was finally harvest day! 🍑✂️🌿 After her entire outdoor journey, the plant was harvested today and separated into individual branches for drying. Only after spreading everything across the drying rack could I really see how many flowers she had produced across all those side branches. 😍 I especially love some of the chunkier buds and the darker colors that appeared towards the end of flowering. Now it's time to dry slowly, cure patiently and wait. ❤️ Final dry weight, aroma, flavor and effects will follow after curing. 🍑 Apricot Outdoor 2026 – HARVESTED! 🌿✂️🔥
Likes
10
Share
@teabee
Follow
Overall pretty happy with the grow, had a little mold issues but humidity was way to high for a while.