Likes
Comments
Share
Likes
1
Share
@Jakor420
Follow
Un poco descontrol con las podas pero de los errores se aprende, ya preparados para el 2do round
Likes
12
Share
week three flower everything looks fine so far :D eight days after defoliation I water them with 1.5l every 48h the light I use was set to 80% and it hangs 80cm away from the tops both gorillas had thrown a few balls, but I removed them as soon as I saw them, I will keep watching them!
Likes
13
Share
@Pemidaisy
Follow
20 July - Foliar only today as soil is still wet 21 July - full water and foliar 22 July foliar with amino boost solution Preparing compost tea to be applied tomorrow after 24-36hours Compost tea recipe: 5 gallon dechlorinated water 1/4 cup worm castings 1/4 cup forest soil 1/4 fungal dominant compost 1 oz kelp meal 3 tablespoons rock dust Teaspoon humic and fulvic acid each 1.5 tablespoons unsulfered molasses 23 July - fed tea today 24 July foliar only 25 July - small water with foliar 26 July - foliar with amino boost 0.5ml per litre
Likes
7
Share
@Eddjack
Follow
Sta esplodendo si iniziano a definire le prime cimette. Inizia a emanare anche un buon profumo molto fruttato, per fortuna esistono i filtri ai carboni attivi. Ora sta solo ad aspettare dopo le carenze iniziali si e ripresa alla grande vedremo in futuro che succederà. Dajeforte growes
Likes
21
Share
We’re making some solid progress now. 🌱 Nothing crazy, no miracles overnight; just things moving steadily in the right direction. And honestly, after how this run started, I’ll happily take that 😅 The buds are stacking up nicely and getting noticeably frosty, and that sweet smell is definitely starting to fill the tent. One of the plants is still a bit limey / faded, while the others are coming in darker and stronger; but overall, they’ve clearly settled in and are doing their thing now. Stats so far: 💧 Watering: Every third day 🌡️ Temp: 26–28°C 💦 Humidity: 65% RH 📈 VPD: ~1.18 kPa 💡 Light: ~700 PPFD
Likes
10
Share
@barlobruz
Follow
8/22/2021 - Did some mid-flower defoliation to increase airflow and to prevent mold and mildew. - Split the top right main from trying to train her down and spread out the canopy, supporting with tape and twist ties. 8/23/2021 - Top right main is still vigorous after split.
Likes
3
Share
@jaydee702
Follow
feeding the girls warer only this last week of rippening . the tall skinny pheno is getting purple with some light orange to yellow making it look wicked with yellow on purple the the other girl that is fat has flaming red pistels making it look like fire on dark greenish purple undertones and noticed a fresh snow that scared me thinking it was mold till examining closer its the tricombs glazing over really thick in all the cracks making it look white and fuzzy like powderd snow its not fuzzy its extra sticky lol
Likes
3
Share
@Kinghaze
Follow
-Week 5 of veg They react verry well on the topping. Next watering I will increase the nutrition a little bit. The smaller plants are caching up with the others. They are looking healthy and green, (on the photo they appear a little lighter bc of the light) Can't wait for flower time.
Likes
12
Share
@FloKTC
Follow
This is my first Grow Report at first i thought i messed up some seeds because 2 of them was for about 24 hours under SANlight so i have plant new seeds from Norden Seeds , Nordic Gorilla Glue, but only one died and maybe that was my bad too so at the moment i not sure which plant has which genetics but we will see more in the flowering stage , i hope this is my last time i flush seeds out of the soil 😅 Germination Method was 24H glass of water and then 24H Paper Towel Germination start 16.7.2024 first leaves 19.7.2024 ( 2 out of 6 ) water i used : osmosis water with calmag ( proled )
Likes
4
Share
Day 58 from seed. They looking good. Thinking about 2 weeks more. Mostly cloudy trichomes with a few starting te yellow. Pistils are turning brown. They are drinking less or taking longer to drink the amount given. Its crazy to me how i gave these girls 4L each and never had any runoff. Reducing the nutes to 50%. Really noticing fast grow cycles to harvest when using the deepred 660nm light. The smells are very fresh and sweet. Its like the smell of a just peeled orange. Buds are super heavy and dense, alot of mass. They are like golfballs. Planning to harvest on day 73. Already planted 2 blueberry autos for my next grow in autopots.
Likes
223
Share
💩Holy Crap We Are Back At It And Loving It💩 👉WE R SO CLOSE NOW👈 Growmies we are at DAY 63 and she's just killing💀it👌 The Gorilla Punch Is Amazing 👏 But so is the OG 👉We are in full flowering mode for the👈 OG 👍 GP 👍 the AF was the hold out but shes finally flowering👈 So Shit , I gave them just a tad to much nutes at the start feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
29
Share
@EXZELENS
Follow
1st of November, HARVEST, D91 So, after the 24 hours of darkness, she is now beautiful and ready. After chopping her, I hung her for some hours – I had some stuff to do – and after that I did wet trimming since I find it more convenient and I don´t like to trim dry buds. I guess the best way for me would be to leave it drying for some days, do the trimming, then leave it drying some more, but, I sincerely don´t have patience lol. When I was in the last stock to trim (which was the main btw) the top bud looked strange to me so I opened it and it was starting to rot.. I got really sad but what can I do except for trying to save it, right? So I took all the rotten parts out of the top bud and tore it to pieces to watch it closely and keep it from getting any more mold. D94 Today I weighed the half part of the top bud that was already dry and it remained without any mold: 3.6 grams. D97 Everything is dry and now curing, the total weight is 68.6, 65 of the whole plant and 3.6 of what I saved from the rotten bud. I´m really happy with the results, the buds aren´t much dense but they look beautiful. D111 Today is the 14th day of curing. D120 Today I´ll be doing the smoke report, it´s been curing for 3 weeks and the smells is quite good already, I know it can be better but the taste is good already so I´ll be doing it today. More info on growing in the previous weeks and a summary of growing and also the smoke report are on the top at the strain review. Thank you very much for reading my diary!
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
12
Share
Hello everyone, I've had a busy week, so this is what I have for you guys See y'all next week 🤘🤘
Likes
4
Share
The flagship of all my grow rooms, this is the strain you want to run into constant production I find strains the pack on the sugar, but will not bulk up and chunk up, in my option Seed Junky Genetics always delivers top notch seeds
Likes
6
Share
Im goong to start a to flush one of my plants this week for 10 days the other one is a few weeks away yet