Likes
Comments
Share
16.02 First day of the fourth week of flower. Defoliated a little bit again. This time around I’m picking smaller amounts of leaves every day in comparison to one major defoliation on one day. Also I ve added pk booster at 100 ppm.( 0.2 ec) will gradually raise it over the next weeks. Lowering the base nutrients. I think they finally stopped the stretch and they are barely fitting in the tent. I ve added some swirski ulti mite . Predatory mites as prophylactic measure for thrips. I’ve noticed some tiny damage on a couple of leaves. And a couple of larvae.
Likes
26
Share
Cette semaine les nuriments sont au maximum, seulement P et K. D'ici une semaine je vais rincer l'ensemble de la culture. Pas de problème recurant, je suis très content des couleurs.
Likes
17
Share
Well after failure fist time around after germination we go again,.. seeds germinated 24th and broke soil 26th ,.. conditions should be perfect, roll on next few weeks 👌
Likes
24
Share
@SooSan
Follow
90x60x140 (Mars Hydro) FC-E4800 (Mars Hydro) Easy2go Aquavalve5 (Autopot) Living Soil (Demetearth) Bruce Banner (PEV Seed) Gorilla GG4 (Ganja Farmer) Cream Caramel (Sweet Seed) Gorilla Gelato (Ganja Farmer) Blueberry (00 Seed) Kalini Asia (Zamnezia) Biscotti Mintz (Barney's Farm) Blackberry Cake (Sensi Seed) Amsterdam Amnesia (Dutch Passion) Gelato Cookie (Ganja Farmer) Purple OG Punch (Ganja Farmer) Sweet ZZ (RQS) Rainbow Road (Paradise Seed) Substrat ~50L: 30L Super Light Mix Biotechnologie 18L coco 2L perlite 1,7kg lombricompost 350g guano de chauve-souris 350g Zéolithe 350g Basalte 170g guano vers de farine 170g biochar 0,7g Endomychorise glomus intraradices 0,7g Bacillus Amyloliquefaciens Paillage de luzerne alfalfa Arrosage avec 2ml/L de mélasse de canne 1x par semaine Pulvérisation avec 1% d’huile de neem
Likes
43
Share
it's always a pleasure to do business with Barney's Farm!!! They have never let me down even once!! Even in the worst situations and conditions they have always been able to bring out the best for me!! I really enjoyed forcing these plants to see their reactions, but I wouldn't do it again as a technique because it only serves to keep the canopy low but not to increase the yields...or...at least in my case I didn't find it of fundamental importance....maybe a simple cut of the apical top and that was it! but that's fine 😉
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
80
Share
@Hawkbo
Follow
I'm just gunna post videos until things get interesting, I'm not winning any awards anytime soon anyways on here but when it counts In the last few weeks I'll do the pics. Its day 31 here and everything looks pretty good.
Likes
13
Share
@SkunkMT
Follow
Start 8th week, nice odor and good conditions. Putting now more PK.
Likes
20
Share
@NOLOGIK
Follow
1/8 prepare Easy combo bloom: hello then this day I prepared the easy combo bloom of the royal in 6 liters of water with controlled ph, this nutrients make the flowers become big, among other things this will be like a booster! on i bud 30/07/2019 I can say that this strain drinks! in fact, he drinks a lot and the nutrients don't seem to bother even at higher doses ... has anyone noticed the same? 17/06 if you have seen the diary from the beginning you have understood that the counting of the weeks starts when I put the seed to sprout ....
Likes
25
Share
Day 106 16/10/24 Wednesday (Start of week) No watering today. But picture and video update 📸 💚 to start the week off 🤩 - just noticed I missed out Auto Kabul... I'll add her tomorrow. Day 107 17/10/24 Thursday De-chlorinated tap water pH 6 with flawless finish today Day 108 18/10/24 Friday I have moved them!! Now in the cleaned down 1.2m x 80cm. Under 660w to finish this week off 💚 Day 109 19/10/24 Saturday De-chlorinated tap water with flawless finish pH 6. Only 300ml Day 110 20/10/24 Sunday Another de-chlorinated tap water with flawless finish pH 6. Day 111 21/10/24 Monday De-chlorinated tap water and flawless finish ph 6 again. Again 300ml. Will upload pictures and videos tonight ✌️💚 Day 112 22/10/24 Tuesday (End of Week) Edit: Changed my mind, doing one last flush with de-chlorinated tap water and flawless finish pH 6. She can finish the week then go dark🌑 mode wednesday morning 😁✌️
Processing
Likes
23
Share
@Grey_Wolf
Follow
Fast buds new originals lineup Sour Diesel auto is beginning its 4th week of flowering today Jan 4th 2020 The two plants are very different in both size shape and structure with plant number 1 being tall and lanky with big internodal spacing whilst Plant 2 is a squat bushy two headed monster 😂 They both have a citrus like smell . Fed only water this week just gone . Thanks for stopping by 👍
Likes
52
Share
@Hashy
Follow
Grow diary 11 Stage 1 Days 1-10 By day 4 all was looking good, she had a few roots coming out the bottom of the cube. Day 6 I transplanted her to the 3 inch rockwool cubes that had been soaked for 15 mins in this stage nutrient solution and left to drain for 15 mins, then she went into the bigger propagator. Day 10 she had 1 root coming out the bottom of the 3 inch cube. Over the last few days she has been getting more exposure to the fan, with the lid of the propagator the humidity is on the low side, but i want to get some air movement around her. She has grown o.k over the last 10 days. She looks healthy enough and is where I would expect her to be in growth. She is the best looking seedling out of the grow at 10 days. Temp Max 30.6c Avg 26.6c Min 21.2c Humid Max 85% Avg 69.7c Min 45.7% VPD Max 1.86 Avg 1.03 Min 0.44 Hopefully back in 10 days
Likes
3
Share
Processing
Likes
9
Share
@Kushizlez
Follow
Slurricane #4 Yield: 34.5g Smell: 8.5/10 - gassy, deep piney, fuel, earthy, Bag appeal: 8.510 - slightly leafy/stemy Crystal coverage: 7.510 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes nice, burns like shit. 46.5/70 = 66% 👎🗑️
Likes
2
Share
@Aleks555
Follow
Everything is going great! On the 48th day of vegetation, we switched the light cycle to 12/12, and for the second week now, our beautiful Golden Sands - 1 has started flowering. She’s been growing rapidly and noticeably increasing in height. We continue to feed her with fertilizers from Xpert Nutrients, and the results are impressive. A huge thank you to Xpert Nutrients for their high-quality fertilizer, which is not only effective but also very easy to use. With such a reliable product, we’re confident that everything will turn out perfectly!
Likes
5
Share
overall Garden is looking great didn't look that great after Hurricane Florence's aftermath on the northern states
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
21
Share
@MG2009
Follow
01/01/2022 Potting up and amending with 5-2-4 to give a little kick before mid flower #6 is first girl to show herself, also got two different males and only difference is that one is lighter green and other darker green (also dark green one seems to drink more than lighter green) 💚. Other than that structure is very similar I wonder which is a better breeding male? I guess I might pollinate and LABEL TWO BRANCHES ON each female one for each male. and find out.🙏🏻 01/06/2022 #3 showed today, reppoted and into flowering closet, along with#6,who showed earlier this week lights at 14-10 see how they respond to that schedule, which should help use up the 5-2-4 going into week 3 should help with her stretch. Which isn't really that much I believe maybe double her current height, which I will check at lights on.Week ,#3 if I think of it I'll give a good fungal dominant tea.