Likes
Comments
Share
Likes
14
Share
EVERYTHING IS HARVESTED NOW AND TRIMMING LIKE A MANIAC. STAY TUNED FOR THE NEXT BIG GROW. THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
2
Share
@habibi
Follow
Macht zwar langsam Fortschritte ober es geht vorwärts.
Likes
20
Share
Ha sido un grow muy divertido, me ha gustado como ha quedado finalmente, una planta bajita, con muchas colas, algo finas pero bien prensadas y con mucha resina. Ha sido una de las plantas que mejor ha consumido los nutrientes durante todas las fases de cultivo. El aroma es bestial, tonos cítricos y a hachis . Pronto actualizo con notas de humo.
Likes
14
Share
Harvest was great, got 6.5 oz off the first plant, cured and 7 1/4 oz off the 2nd plant, dried and cured. I never weigh wet, idk why lol.. jus too in the moment I guess.
Likes
13
Share
Day 33-13/01/22 they look really well I’m just trying to make space in my other tent so I can move half of them out and be more organised but I think this is the last week of veg!!!
Likes
14
Share
@Kakui
Follow
16 Diciembre: El runoff ha alcanzado los 10EC, las plantas siguen creando puntos de floración con espacio internodal corto, gracias al stress generativo, están de 80~85cm de alto aprox. Hay una sola planta que tiene más de 90cm. En unos 2 días más se alcanzarán los 21 días de floración, ese día se hará una defoliacion grande y Lollipop, después de esa defoliacion se volverá a riego vegetativo para estimular el engorde de los cogollos. 18 Diciembre: hoy la EC del runoff alcanzó los 12EC, mañana se harán más disparos de riego para bajar la EC del sustrato. Hoy también se realizó una defoliacion agresiva + Lollipop, para que haya mejor penetración de luz en el Canopy y mejor flujo de aire. Queda solo una semana de riego Generativo, después de eso se vuelve al riego vegetativo para engordar los cogollos.
Likes
4
Share
🌸 Woche - Week 10 Review 🌡️ Wetter: Nach einer Hitzewelle kam die Abkühlung – jetzt eher regnerisch, mit ab und zu einem Sonnenstrahl. 📈 Wachstum: Längenwachstum abgeschlossen, Pflanze konzentriert sich auf die Blüten. 💡 Licht & Energie: Sonne wird trotz wechselhaftem Wetter gut mitgenommen. 🌿 Blattgesundheit: Blätter sattgrün, keine Probleme. 💧 Wasser & Nährstoffe: Während der Hitze viel Wasser gebraucht 💦, jetzt durch Regen etwas entspannter. 🔄 Entwicklung: Überall kleine Ansätze – die Vorblüte läuft richtig gut 🌼. ✅ Fazit: Meine erste Pflanze, dauert länger, aber die Vorblüte macht mich zufrieden. --------------------------------------------------------------------------------------------------------------- 🌡️ Weather: After a heatwave, it turned cooler – now more rainy, with occasional sunshine. 📏 Growth: Vertical growth finished, plant focusing on flowers. 💡 Light & Energy: Sun is used well, even in changing weather. 🌿 Leaf Health: Leaves deep green, no issues. 💧 Water & Nutrients: Needed lots of water during the heat 💦, now rain helps keep it balanced. 🔄 Development: Many small sites forming – pre-flowering going really well 🌼. ✅ Overall: My first plant, taking longer, but I’m satisfied with how pre-flowering is going.
Likes
10
Share
@jojopfoh
Follow
such as easy girl to grow. Buds are getting heavy so I had to add some bamboo stakes for support. No amber yet
Likes
21
Share
The Plant was transplanted it 0.5 litre pot..
Likes
Comments
Share
Likes
40
Share
@BLAZED
Follow
Week 12 (29-12 to 4-1) 29-12 Temperature: 26.4 degrees (lights on) 20.1 degrees (lights off) Humidity: 72% (highest) 50% (lowest) Watering: None. 30-12 Temperature: 24.6 degrees (lights on) 18.7 degrees (lights off) Humidity: 71% (highest) 50% (lowest) Watering: None. 31-12 Not at home. 1-1 Temperature: 25 degrees (lights on) 18 degrees (lights off) Humidity: 68% (highest) 45% (lowest) Watering: Both 2000 ml. PH: 5.8 EC: 1.8 As you can see the PH from the feeding water is a bit low, this is because someone suggested that i can try to lower the PH as my PH pen was a bit too high, aswell as my soil PH. Lamp is at 80% and 40 cm distance. Happy new year growmies! 2-1 Temperature: 25.5 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 47% (lowest) Watering: None. 3-1 Temperature: 25.2 degrees (lights on) 18.4 degrees (lights off) Humidity: 56% (highest) 49% (lowest) Watering: None. 4-1 Temperature: 26.4 degrees (lights on) 18.8 degrees (lights off) Humidity: 64% (highest) 44% (lowest) Watering: None. I did a soil slurry test to check my soil PH and EC. I dont know how accurate this is, but these are the results: Water used for the test: PH: 6.5/6.6 EC: 0.0 Biscotti #1: PH: 6.7 EC: 0.8 Biscotti #2: PH: 7 EC: 0.6 No pictures of the plants today.
Likes
2
Share
@Xabii
Follow
Plant is doing OK? for 21 days? I am a little unsure because she is simply not stretching but growing good on the side notes. After some discussion on /r/Mephheads I came to the conclusion that I will try to lower the DLI so that the plant stretches because for now there are way to many nodes way to close together. Received my predator mites and added them (the pouch). Increased EC at the end of the week with Universol (high in P) and added some water to the reservoir. Heatwave is coming so next week will be hot in the tent, no way around that. Values are average of the day. DATE - EC(us/cm) 20250607 1317 20250608 1329 20250609 1321 20250610 1306 20250611 1319 20250612 1397 20250613 1483 DATE - PH 20250607 5.99 20250608 5.97 20250609 6.05 20250610 6.13 20250611 6.13 20250612 6.09 20250613 5.95 DATE - ORP (mV) 20250607 110 20250608 113 20250609 93 20250610 83 20250611 75 20250612 61 20250613 60 DATE - °C - RH% (Tent Temp/RH) 20250607 24.8 60 20250608 24.8 60 20250609 24.3 59 20250610 24.8 60 20250611 25.1 59 20250612 24.7 53 20250613 25.3 62 DATE - °C (Reservoir) 20250607 22.0 20250608 21.9 20250609 22.2 20250610 22.4 20250611 22.6 20250612 21.5 20250613 24.2 DATE - CF 20250607 13.17 20250608 13.29 20250609 13.21 20250610 13.06 20250611 13.19 20250612 13.97 20250613 14.84
Likes
2
Share
@kissrubb
Follow
Actualización 05/10/2024 ¡Hola, growers! Perdón por no poder compartir las semanas completas, pero poco a poco volvemos a la normalidad. Las fotos que ven corresponden al día 01/10/24 y, como pueden ver, están llenas de terpenos y tricomas por todas partes. Tanto la Fruit Gum como la Biscotti x Candy Rain son dos de las cepas más resinosas que he cultivado y, además, desprenden un olor increíblemente fuerte. La Fruit Gum tiene esos toques dulces y nostálgicos, como a chicle de mascar, que me transportan directamente a mi infancia. En cuanto a la Biscotti x Candy Rain, su aroma es como el de una clásica galleta americana casera, ¡muy intenso! Ambas cepas me están impresionando mucho por su resinosidad y aromas únicos. Cabe destacar que las genéticas de Uktha Genetics me han sorprendido gratamente; los resultados están siendo fantásticos. Eso sí, estas cepas comen como camiones, pero mientras se mantenga un control exhaustivo de las fertilizaciones y del medio de cultivo, no hay problema de sobrefertilización. Pronto cortaremos una de las plantas que está bastante adelantada. Espero que disfruten tanto como yo este proceso y, como siempre, ¡buenos humos para todos! 🌱💨
Likes
7
Share
@maxpain
Follow
The g14 big buds curing now
Likes
2
Share
09/03 - Clone cuttings running strong - Chopped the mother - Pulled approximately 17 viable clones - currently in solo cups rooting - Heavy on the humidity prop 80% - Temps 79 (F)
Likes
1
Share
Nose Candi - Harvested Plant Overview — This final image showcases an exceptional harvest result. The plant displays dense, resin-rich colas with a heavy coating of trichomes, signaling high potency and well-developed cannabinoids. The buds are compact, chunky, and carry a stunning mix of deep purple hues, vivid orange pistils, and touches of lime green—a truly striking visual contrast. The sugar leaves and fan leaves are dark purple to nearly black, suggesting strong anthocyanin expression, likely influenced by genetics and possibly cooler environmental conditions during late flowering. The trichome coverage is thick and milky, with some amber likely present, indicating peak maturity at harvest. Overall, this plant appears to have reached optimal ripeness. Bud structure, coloration, and resin production all point to a top-tier result — both visually appealing and potentially very potent. This will likely cure into a beautifully aromatic and flavorful final product. Excellent work!
Likes
1
Share
Schädlingsfreiiii.. dafür bissle Magnesiummangel :/
Likes
6
Share
@Chubbs
Follow
These girls are growing amazing. I did some defoliation and lollipopped them this week. Hopefully with more air flow at the canopy level and lollipopping, the tops and main colas can focus all the energy on growing some beautiful flowers. All in all Happy Growing.
Likes
21
Share
Heyókȟa I desire naught but the study of nature, to find my way back home. 12x12=144, A dodecahedron is a polyhedron with 12 faces, and in coordination chemistry, it refers to a geometry where ligands surround a central metal atom (in this case, Magnesium) in a specific, 8-coordinate arrangement. Dodecahedrane is a hydrocarbon, meaning it's composed solely of carbon and hydrogen atoms. The carbon atoms are arranged at the corners of a dodecahedron, a 3D shape with 12 pentagonal faces. The water molecules in the dodecahedron form hydrogen bonds that are individually slightly weaker than in either the dimer or the tetramer. However, because three-quarters of the O -H groups in the dodecahedron form hydrogen bonds, it has a more negative energy per molecule than has either the dimer or the tetramer. Magnesium (Mg2+) is the essential, central metal ion in the chlorophyll molecule, crucial for photosynthesis by enabling light absorption and energy transfer. It is chelated by four nitrogen atoms within the porphyrin (or chlorin) ring structure. Chlorophyll appears green because it reflects light in the green region of the visible spectrum, specifically between 490 and 570 nm. The main resonance electronic frequency of a neutral Magnesium (Mg) atom corresponds to the transition from the ground state to the first excited state. Resonance Line Wavelength of Mg2+: 285.1nm (UVB light). The central atom of the chlorophyll molecule is Magnesium (Mg2+), which is coordinated within a porphyrin ring. The electronic "resonance frequency" of this central atom—meaning the frequency at which its electrons absorb energy—is primarily driven by the electronic transitions (ETR) of the surrounding conjugated chlorin ring structure, rather than a discrete atomic transition of the Magnesium atom itself. The resonant electronic frequencies of the chlorophyll porphyrin (technically, a chlorin) ring are determined by the energy required to promote π-electrons within its conjugated system, primarily appearing in the blue and red regions of the visible spectrum. In standard physics, Chloryphyll b has peak absorption at 460nm (Blue). If we take the peak wavelength 460nm and a UV-B, UVR8 peak absorption wavelength 285nm Tryptophan-285 (W285) Sensing protein. 460/285=1.618 Φ, "natural harmony" and the "structure of light". The cryptochrome photoreceptor (CRY) is a UV-A/blue light receptor that shares this dual sensitivity with several other biological structures and functions, including significant sequence similarity and a common evolutionary ancestor with DNA photolyase enzymes. These are light-activated enzymes that use blue/UV-A light to repair DNA damage caused by UV-B radiation in plants. Dodecahedrane (C20H20) is a hydrocarbon with a cage-like structure where carbon atoms form 12 pentagonal faces (a regular dodecahedron). It is highly symmetric (icosahedral), contains no delocalized electrons (no aromaticity), and has minimal angle strain, but significant torsional strain. Water Dodecahedron (H2O) forms hydrogen-bonded cages. While individual hydrogen bonds in this structure are weaker than in the linear dimer or tetramer, it has a more negative total energy per molecule. This is because three-quarters (75%) of the groups are involved in hydrogen bonding, creating a very stable, closed-shell configuration. a 3D carbon hydrocarbon (C20H20) to stable water clusters in hydrate, while the Magnesium ion acts as the central activator within a conjugated ring in biological systems, with its electronic absorption dominated by the ring, not the atom itself. Effective quantum efficiency of photosystem II, often denoted as ΦPSII In horticultural lighting, adding 730 nm (far-red) LEDs alongside standard red/blue lights has been shown to increase canopy photosynthesis by 20–30% in several crops by acting synergistically with shorter wavelengths. However, the limitation is that excessive, pure IR/Far-red light (without accompanying red light) can trigger the "shade avoidance response," causing plants to grow tall, weak, and spindly rather than robust. Knowing is half the battle however, engineering or utilizing infrared light (specifically the 700-750 nm far-red range) is a viable method to boost photosynthetic efficiency. It acts as a bridge to allow PSII to utilize a broader spectrum of light, breaking the traditional 700 nm barrier. Extend, then multiply. UVR8-mediated signaling (often in conjunction with CRY proteins) triggers protective mechanisms that maintain the stability of the photosynthetic apparatus (including LHCII and reaction center proteins), thus ensuring that the efficiency of Photosystem II remains higher in UV-B-exposed plants compared to plants lacking this receptor. ΦPSII indictates the rate of electron transfer from water to plastoquinone, which drives the production of ATP and NADPH. There is a close link between ΦPSII and the true rate of CO2 fixation (Φ*co2), particularly in C4 plants. Effective quantum efficiency of photosystem II, often denoted as ΦPSII, represents the proportion of light absorbed by Photosystem II (ΦPSII) that is actually used in photosynthetic electron transport. It is a key indicator of how efficiently a plant is using light for photosynthesis, as opposed to losing it as heat or fluorescence. ΦPSII (effective quantum yield of photosystem II) functions primarily as a "multiplier" (a coefficient of efficiency) rather than an additive factor when estimating the overall photosynthetic electron transport rate (ETR). Multipliers are considered far more beneficial than additions because they generate exponential growth, leverage existing resources to their full potential, and create sustainable, self-multiplying capacity, rather than just incremental, linear increases. Humans, and most other mammals, rely on other mechanisms, such as nucleotide excision repair, to manage and repair UV-induced DNA damage. As such, humans do not have the direct, light-driven repair mechanism that photolyase offers in plants.