Last days before harvest, can't wait to smoke her. Day 88 - Last day before harvest, very excited. I will turn down lights about 1 AM, and harvest at about 2 PM. Day 89 will be a harvest day. Peace.

And she’s moving— just gave an ipm treatment and tip dress of kelp. I take it slow the first 2 weeks of flower then slam them with nutes in the next few weeks. Look out!✌️🏻💚

dry weight of buds after trimming = 93 gram and about 5 gram of Trim so 98g Total. Actual plan was to leave the plant some more days but after seeing some Nanas developing inside the buds i decided to cut it at day 65 of flower. great smell and cant wait to smoke the final product. All in all definetly a good strain for living soil.

Right now the plant is doing good. She seems like she had slight deficiency on some of the fan leaves. I gave her good water of nutrients and recharge so she will be fine. Little budlets are everywhere. No purple yet. Was hoping I got a solid purple pheno. Well well see if she purps in the end. Stay tuned.

Gorilla glue has been growing really well. She is doing good under the G300W Spider Farmer light. Just did some training today. Waiting for her to spread out good, and reach maturity before I flower. So a few more weeks for sure in vegging. Nothing else to report. Thank you Spider Farmer, and Amsterdam Marijuana Seeds. 💪❄️🌱🤜🤛 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash

Hi Growmies, I topped her towards the end of this week and removed two sets of fan leaves. It opened the plant up very nicely in combination with the light LST I applied earlier in the week. The plant is taking very nicely to the LST and didn’t seem to care about the topping either. I attribute this to the strong root system she already has. For the next week I have fed her additionally to the canna nutes, some plant success orca, for healthier roots and Rezin from greenplanet to prepare her for pre flower. Here is the code that’ll give you 20% in Zamnesia‘s online store, just input ZAMMIGD2023 at checkout. Thanks for stepping by and until next week!

Getting ready for the switch to 12/12 and looking good starting to have a nice smell about the tent all ready cupla little experiments as ye can see in the video a think 1 might make it ✊

This will be their last week. I'll chop on friday or saturday. The'll recieve only plain water this week. --- 14. 08. Tonight is the night..

11/10/18. Shes finishing really strong. Not sure if the Cha Ching doesn’t I’d much much but the Beastie Bloomz definitely helped. I think my feeding schedule was off by a week or two because I’m unfamiliar with autos. Next run I will begin the soluables at least a week earlier to allow for two feedings of each along with a flush. Right now im not sure if i will have enough time before finish. It’s my only concern. 11/12/18. Watered fully to runoff. Plain water at 6.5 11/13/18. She is finishing very nicely. Decent frost, tri’s are still milky with only a few beginning to turn amber. I ditched the cha Ching. IT didn’t do much and I think it burned the leaves....and that was a 1/8 teaspoon / gallon so users be cautious. I do feel the Beastie Bloomz did help.

Nothing special. Its sis in south facing solo cup smells amazing and sticky but that one is farther ahead. Gonna do just organic ferts and water see what happens im getting lazy

Day 28 - These ladies are growing like crazy! 2 of them are already almost as tall as my white widow autos that are about 2 weeks ahead! Day 30 - Still stretching like crazy, starting to look much better though I have to say! Day 32 - Ladies are starting to get nice & purple!

So Ugly Genetics, little plant that go in flowering at two weeks. 1/3 Seeds come out, GrowShop near home so bad quality articles. Microscopic root develop... do not use "eazy plug" as a seed's first pot... don't trasplant autoflowering strain. From 60 grams wet, 12 grams dry ...

Yeah I have already written a review about it in my previous diary. It is really strong not a day time smoke... It makes you really high. The plant is very very stinky when you cut so close all the doors and windows!!!!!! Last 2 pictures in the jar was aken after 4 days of the harvest. The harvest day it was 171g and after 4 days 80g. It needs to be cured. After 6 days its weight 51g. The last 6 pictures show the flower after 3 weeks of curing. The best thing in this smoke that it doesn't have that strong smell at all almost nothing but the effect is in :) All the plants grow at least 40-50 cm but it can grow over 100cm as well if you let it. 4 weeks later : I decided to make some cannabutter. Update: Fucking hell I have never tried brownie or tea like this and also I have never been so high. I put one tsp into my tea and felt nothing so decided to repeat with 3 tsp. I went to take a nap and when I woke up I couldn't see I was so fucking high for several hours. Uhhh was great tho.😂✌️✌️ Last 10 pictures: This is what left after almost 3 months of harvest I smoked and cooked it.

This strain is the best thing I've ever grown in my life. It is absolutely my favorite of all. It always was, and always will be my prime top choice. It almost seems that this particular strain was created by the weed gods and designed specially for me, considering all my preferences. I had absolutely no problems growing it. The plant was beautiful, the size was ideal, the smell and the taste were just supreme, and the harvest was tremendous! Excellence throughout all the aspects.. უპრობლემოდ გაიზარდა , და რაც მთავარია ყველა ტვინს რო ტყნავს არ იბოლებაოო , მშვენივრად იბოლება მინდა გითხრათ :) ❤️❤️❤️🔥🍀

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 65 : officially 1st day of flush . Changed the reservoir with fresh water and 1.2g/5 gallons of Yucca extract and 5ml/gallon of Cleanex from Botanicare . Day 68- I did some defoliate. Few more days until harvest.

Was a wonderful run !

Day 91: Tuesday , start of the 14th Week. nothing crazy happened the last Days. Day94: Gave her some Molasses. next watering maybe some liquid N , cause leafs start yellowing but i think she´s not close to harvest yet...so just a little bit, before we flush in about 1-2weeks

Beginning of week eight and the smell is even stronger. Fade set in lovely. With that being said.. I have to give credit to this company is said it would be ready in 55 days and yes it's ready. Normally I would stretch it out at least two more weeks. But since I have to move the next pictures will be the last. It's been great and I did not have not one issue with her. She smells good look good and I'll let you guys know end result. It's been only water from beginning to end

Did some defoliation this week also had some worm attacks one of the luxuries that comes with outdoor n they always seem to wait until the buds start to get pretty