Check the winners The Grow Awards 2026 🏆 
Likes
Comments
Share
@Kirsten
Follow
14.1.25:
I've been readjusting the LST. I just took all the pegs out and reshaped her.
I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕
I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it!
Also I'm running very low on Biobizz nutrients, so that could be bad 🤞
18.1.25:
I have done another large defoliation on PPP1 and PPP2.
Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted.
I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant.
I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too.
This run I have 9 plants. The only thing I'm worried about is the salt build up.
Have you used it before? Or any other natural way to increase PH? Please let me know!
I've also added Biobizz Fish Mix to help with the extra Nitrogen needed.
Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;-
♡ 4ml Biobizz Fish Mix
♡ 4ml Biobizz Bio-Grow
♡ 2ml Biobizz Bloom
♡ 2ml Biobizz Top Max
♡ 2ml Cal-Mag
♡ 2ml Ecothrive Flourish.
I water with this every 3 days.
I did order some more Biobizz Bio-Grow and Bio Bloom.
I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too.
It is fairly expensive this time as the plants are hungrier this run.
I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments.
Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore.
I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄
I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues.
Cleaning the tent after watering every time isn't my idea of efficiency 😅
Thanks for checking out my diary 🍃 ✌️
Likes
18
Share
@Ananas_Comosus
Follow
Monday, 14.03.2022
All plants seem to be almost fully recovered from phytotoxicity a few weeks back. They are stretching nicely and putting out new leaves. Numerous bud sites developing. I would have wanted them to be bulkier but let's see how they do. No significant rain this past week so I was able to feed a couple times. 8~ml per 5 gallon tap water Ph Down got me to around 6 Ph. I thought I would have needed to water on Thursday since two days had passed since I last watered but the plants seemed turgid and OK and Friday night was the same so I didn't water until Saturday. Found a mature stink bug hiding under a leaf on a stem top.
Likes
2
Share
@HavelGrower
Follow
Week 7.
Did nothing besides putting nutrients und water in the system. Spreaded the plants every 2 days to fill the space. Week 8 will start with 42h of darkness and flip to 12/12 afterwards.
From now on I will turn off the far red during lights on period. The canopy is filled so it’s now just beneficial for putting them to sleep or waking them up. Using far red in the early flower time could cause a unwanted stretch. In mid-late flower I am going to use it for the Emerson effect.
Conditions of the Grow:
💡 PPFD: 550 umol/m2/s
☀️ DLI: 35.6 mol/day
🌓 Lightcycle: 18/6 h
💨 Humidity: 50-55 %
🌡️ 🌞Daytime Temp.: 21-22 *C
🌡️ 🌙Nighttime Temp.: 18-19 *C
🌡️🌱Leaf Temperature: 20 *C
🌡️💧Water Temperature: 18-19 *C
Water TDS: 1000ppm | EC: 2000us/cm
🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm
Vegetation Equipment:
🔦 Lamp: Mars Hydro FC-E6500
📤Container: 3x DIY 63L Euro-Box with lid
Pot: Netpot 2 inch
💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar
🚿Nozzles: 12x 0.3mm
🫧Waterfilter: 150 microns
🌬️Fan: 3x Clipfan
🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter
🍶Nutrient Brand: Terra Aquatica
🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container
Likes
9
Share
@Excellence
Follow
Gestern Abend habe ich ein DIY CO2 System installiert, konnte aber kaum CO2 messen. Ich bin mir sicher das Gas austritt und auch im Umlauf in der Box ist, doch die gewünschte Dosierung von über 1200ppm scheint für mich unerreichbar :D
Tag 17: Ich vermute, auch wegen den Messwerten, das das nichts mit dem Hinzufügen von CO2 zu tun haben kann, aber Heute konnte ich erheblichen Zuwachs im vergleich zu Gestern feststellen. Aktuell wachsen die Pflanzen Horizontal. Bisher habe ich jeden 3. Tag begossen, heute wäre eigentlich wieder Zeit zum Gießen aber da die Erde, nach Messen, reichlich Feuchtigkeit enthält, werde ich dies Heute auslassen und auf Morgen verschieben.
Ich denke das die Zeit des Trainierens sich gezeigt hat und mache mich derzeit via Videos Schlau. Was denkt Ihr, wann und welche Methode(n) sollte ich anwenden?
An Tag 20 wurde der G13 und White Widow LST angewendet. Blätter und Triebe die kein Licht abbekamen wurden abgeschnitten. Die Amnesia Haze Auto wurde getoppt und auch hier wurden Blätter entfernt.
Für die hilfreichen Kommentare bedanke ich mich im voraus.
Processing
Likes
8
Share
Likes
9
Share
@mheat
Follow
She is so tall...cant raise my cob anymore! Lots of sites...smells stanky!! In a good way...sort of.
Likes
11
Share
@Gamepichayut420
Follow
อยากทำดอกแล้ว แต่อีกชุดยังทำดอกไม่เสร็จ ชำรอทำจำนวนไปก่อนแล้วกันนะ 💚👍🏼
Likes
27
Share
@adam_pawloski87
Follow
Today is day 72 from seed!! This week went real well , 2 of the Forbiddin Runtz have been getting flushed an the rest will also start flush through this next week, I can’t believe the smell of this combo strain,, super fruity smelling an all are super sticky!! Stay tuned for next week yall !
Processing
Likes
10
Share
@DudeGrowsWeed
Follow
She's 4 feet tall!!! Wow! I'm a little concerned about light burn, but don't notice any signs of light burn yet. And she will be going outdoors soon. But I'm very impressed with this girl so far! 👍
Likes
4
Share
@CanadianFillmore
Follow
Start of week 5. Week 4 went well, bud site development is going great, she's gaining size and weight, the smell is like fresh greenery, almost like walking in the spring forest.
Likes
15
Share
@Le_Duc_Du_Bud
Follow
Encore une jolie culture qui s'est bien réalisé quelques problèmes rencontrés mais le résultat est tout de même présent le résultat est super beau la densité est belle la quantité est pas mal maintenant j'ai hâte de goûter la Bubblegum
Processing
Likes
10
Share
@Calarok
Follow
Lots of things this week! I did some aereted compost tea for the first time.
Recipe is easy. 1 5 gallon of declorinated water. In a 400 micron bag, 2 scoop of worm castin, 2 tbsp of alfafa, 2 table spoon of kelp 1 table spon of bat guano. 2 tbsp of unsulphure melasse. Then you put air pomp in it for 24 to 36h max. After its watering time!
Big shout out to Mr. Canucks Grow for the tutorial video. Definitely the best weed channel out there!
https://youtu.be/whE2F72P8Tg
I also unplug the main cob in the white bucket to let only the custom 60w full spectrum led. I think the main cob burned the plant... still not sure but i will try a week with out it.
Thanks for following! Happy growing and stay safe!
Likes
7
Share
@KannaKoom
Follow
6/24: Things are looking good! Haven't really changed much, but I did bring the light a little closer to the plant and I brought humidity down to 70%. The bud sites are growing very quickly. Hoping to be able to start some LST by the end of the week.
6/26: Loving the growth still! Keeping things as is still, as I am liking the results so far and don't think she would benefit from any adjustments. The 4th node has dropped nicely and 5th is coming along fast! Also, I planted four mystery seeds I received from a friend and three of the four popped today! We plan on trying our hand at a little outdoor growing with these. Nothing like a little experimenting, right?
6/29: All is looking well. I did remove the lowermost node, as well as start some LST on the second node. LST is something new to me an an opportunity i was not afforded with the slow growth and early flower of my last grow. I'm excited to see what different it will make. I plan to do the same on the 3rd node as well in the coming week. It's been fun watching this plant grow!
WEEK 3 AVG TEMP: 73.2F
WEEK 3 AVG HUMIDITY: 66.8%
Likes
25
Share
@Kakui
Follow
Veg15, han crecido como 2 centímetros desde el transplante, aún no necesitan riego, desde ahora regaré cada 3~4 días, cuando el sustrato este un 80~90% seco, han estirado un poco desde que subí la distancia del LED y bajé su intensidad, mañana haré Main Lining.
Veg16, hoy se torturaron las plantas con Main Lining, se cortó arriba del segundo nodo y se cortaron también las hojas de un dedo bajo el primer nodo, las plantas que tenían suficiente crecimiento de les hizo LST también, cuando se apague la luz se efectuará un spray foliar con B-52, y mañana un nuevo riego.
Veg17, riego con 5.5 pH y EC 1.8~1.9, se regaron con 1.5 litros y no se obtuvo drenaje, próximo riego tendrá que ser con más cantidad de agua para obtener drenaje, el agua se calentó a 23 grados y se oxigenó antes de regar, mañana se ajustará el LST ya que siguen creciendo muy bien.
Veg18, hoy solo se ajusto el LST, siguen creciendo bien.
Veg19, ajuste de LST, nada más que anotar.
Veg20, siguen creciendo, talvez hay que ajustar la cantidad de luz DLI.
Veg21, tuve que poner una estufa para aumentar la temperatura en el indoor y bajar la intensidad del LED a un 50% para alcanzar un DLI óptimo. Hoy haré ajuste de LST y revisar la humedad del sustrato.
Likes
20
Share
@n1mbu5
Follow
Ok unexpected circumstances called for a harvest would have liked to leave her another 5-6 days but still amber trichomes 5% but we had a lot of foxtailing so there is new growth with not mature trichomes
Can't wait to give her a test drive and I'll update the smoke review and dry bud weight when she's ready!!
Thankfully the last few days were cooler so we also got some purple 💜 she's massive!!! So sticky and smells amaziiiiing 😍
Likes
7
Share
@Naujas
Follow
well, it's exactly 12 weeks :) and my house is full of lemon aroma :) the girl endured really difficult growth, but she coped with everything perfectly :) who followed the growth, you saw that she grew on the balcony for 10 weeks, and she spent the last 2 in the grow tent :) 500 gr wet weight !!!!:) , before putting it in the ground I expected less than 10 g dry yield :D then this growth turned out super well, if it wasn't for my vacation I would have let it grow for about 2 weeks I think. but everything is still very good, I'll go home, fix it and do a smoke review :).
Likes
5
Share
@Miketama
Follow
Northern Lights - Day 54 Harvest Report! 🌿✂️
First harvest complete! Trimmed all top colas fresh, removing parts without trichomes and selecting only useful trim. Main stem removed. The untrimmed apex alone weighs over 90g! 😍 So massive I had to split it into smaller pieces to prevent mold.
Harvest stats:
• Trimmed weight: 150g from this first harvest
• Trim sealed in freezer bags (air removed with straw) and frozen
• Now drying at perfect conditions!
Second harvest coming at day 60!
Thanks to everyone for checking in! 🙏 Appreciate you taking a look!
Processing
Likes
39
Share
@GreenHouseLab
Follow
Harvested Z1 (Zkittlez 1) at 95 days and Z2 (Zkittlez 2) at 90 days, At week 11 the trichomes were 90% milky with 50% orange pistils. They both received a minimum 2 full water flush, what I mean by that is a good 20% runoff to get all that built up out of the fabric pots.
Note to self. 7 Gallon pots were unnecessary for these autos, 5 Gallons would be more than sufficient possibly even 3 Gallon.
I believed the yield would be more considering how dense these buds are. I had forgotten Z2 had been massacred throughout this grow, unintentional topping as she was starting to flower and the carbon filter which fell on the plant damaging the top bud and other smaller bud sites. Taking these into consideration and after weighing Z1 I am very impressed by Fastbudz genetics especially under 13 weeks! I added a video of Z1 & Z2 dry weight to show transparency of my end results for this grow. I think better internodal spacing could allow for better bud development hence a better yield. Overall extremely pleased.
Z1 = 97gr
Z2= 61gr
Density of Buds: 10/10
Resin: 9/10
Smell: 10/10
Dry Time and Cure for Smoke Report: 6 days (are now placed in Masson jars open lid for the next 2 days then 30 min x2/day) at Relative Humidity 60% // Temp: 72° F
Smoke Report : High THC can be felt but not overpowering. Easily tell its heavier on the Indica side - will only know for sure once I try Zkittlez pheno 1.
Curing will take some time. Generally I find 8 weeks minimum tends to give me a good quality product. I will be burping the mason jars twice a day for the next 2 weeks or so and add a 58% Bodeva pack. I prefer 58% vs 62% because I tend to use a Pax vaporizer.
00
Processing
Likes
8
Share
@Buck5050
Follow
I added a humidifier this week to the tent to stabilize humidity.This addition is working great at the moment. The plants showed signs of decent growth in there new home early in the week so I decided to top them. After a couple of days from there topping they are starting to take off with growth.I hope I can cut some clones in a couple weeks and than we will head into flower.Growth is in full effect as you can see by the video. Lowering my PH to 5.5 seems to have quelled the cal-mag deficiency I had in the cups.The bounce back from transplant shock was great this week. I was able to top them on schedule and all are reacting well.