Likes
Comments
Share
@sjsbhvys
Follow
Conclusion Elevating your high is all about choosing the right products
Processing
Likes
2
Share
Still trucking along. I had my light turned up a bit high for the first week, I turned them down a few days ago and all the plants seemed to enjoy it. Nothing else to report really.
Likes
4
Share
@Luram
Follow
This week, I encountered a few issues after switching them to 12/12. The plants have shot up to an extreme height, and it feels like things are getting a bit out of hand! I'm trying to manage the situation using some super cropping techniques to control the excessive stretching. Thankfully, as we're now approaching the end of week 3, the plants are starting to focus on bulking up their buds. As you might notice in one or two photos, a couple of tops touched the panel in the last 24 hours, and I didn't catch it in time. This resulted in a small loss, with part of a top getting a bit scorched. We'll have to wait and see how it recovers. If anyone has any suggestions on why they've stretched so much, I'd really appreciate the insight! Catch you all next week!
Likes
12
Share
@NONSENSE
Follow
Good day to everyone! The plants look great. I switch to flowering this week. ☀️ The light 12/12 ☀️ 🥛 The PH 5.6 🥛 💎 The EC 950ppm 💎 Growing on Rockwool. Watering in and then pumping out every morning. Each plant eat about 1.5L The pre-flowering begun
Likes
6
Share
Likes
55
Share
@Theia
Follow
Hello😀 Week 5 of flower begins as week 4 was. Pretty easy. Did a light defoliation as she was and is got some good leaf on her but I have decided I would go minimalist this round so no training to any plants has been given. The only issue I had was my run off was coming out slightly higher PH then going in. After some sage advice from @lassos I was advised to remove the golden tree as it is more acidic then I want and I also ran PH lower at 5.8 for most of last week giving 2 feeds a day at an EC of 1.9. 3l morning 3l night. I am happy to say PH has balanced out so thanks again lassos👍. Not much else to say she is stacking well with a nice looking flower. Smells kinda sweet not much there yet.. I plan to up the biobizz top max a little and maybe see if she wants a bit more bloom. Temperature has remained fairly consistent with night lows of 20 and I try and keep the flower room at 26c with an RH of 70%. Got a good healthy plant and have some great airflow in there so not overly concerned about the higher RH. That's all really this week. Thanks for looking and I update Instagram with pics of all the girls. Grow well🌱🌿🌱 Stay safe😷
Likes
6
Share
I fell sick. Got diagnosed with gastric ulcer. Thats why i missed the first 3days. Didnt forget to feed her though. Her trichombes clouding up nicely. New growth at the lowest nodes too. Which i dont plan on touching. Harvest time is coming up fast. I can't wait either. New white hairs comin up so im gonna keep feeding. The amount wasnt looking too good either at the beginning but i have better hopes now.
Likes
6
Share
@russrahl
Follow
Going great! Got the second screen on and managed to DIY a bar for my light mover to get my 1000w HPS up as high as possible. One of my main problem always seems to be vertical space! But I imagine a lot of fellow growers know this struggle. Lol still had a few buds reaching up over the 70 DLI threshold directly under the light that I had to hook down to the second screen but for the most part the second screen is just for support. Been watching my ph and ppm and keeping pm between 5.8 and 6.2 and ppm has been giving around the 600-650ppm mark. Because I spread them out in their own 4’x4’ area each plant they had lots of room the grow and I really haven’t had to Defoliate at all, with the under netting grow exception of course. Starting to smell citrusy and bud set is happening. 2nd week of flowering is going great! Cheers 💨
Likes
8
Share
Welcome to week 2! .... We've had some issue with light stress and toppling. Hopefully corrected the problem with a taller bucket! Still watering every other day with 1-1/4 Oz.
Likes
5
Share
Rocking and rolling now. Still stretching and the bud sites are def growing.
Likes
3
Share
@BearBuds
Follow
This week is going well. They had.a BIG stretch this week that has been difficult to handle. Ended up having to sueprcrop 3 different branches in this tent. They also may be slightly under-watered. The Pineapple Express and MelonSickly are DRINKING. BG 41 and ZK are drinking a little less overall. Light is almost at the top of the tent now. I hope the stretch is over now that they have started to put on some pistils. They went through 1 heavy defoliation at the beginning of this week and it just 6 days later it doesn't even seem like I did one lol. I will have to give them another haircut around day 20. For now I am happy with the progress of this tent.
Likes
28
Share
@DreamIT
Follow
Sponsored by: 🌲DUTCH PASSION SEEDS🌲-💡VIPARSPECTRA💡-💐GREEN BUZZ NUTRIENTS💐-🛠️WEDRYER🛠️ 25/7 Despite the very high temperatures and the death of some seeds, I resume germination starting from the ongoing contest, by Dutch passion seeds, which I thank for the sponsorship. So off with the sowing! 28/7 it has appeared in the night and is already ready to become huge😁 2/8 I will combine the two weeks of germination into one. As you can see in the video it is going well, tomorrow I put it in the 0.5 jar. yeah 3/8 I have to postpone the transfer 7/8 decanting carried out in soil biobizz light mix. no nutrients for now🤘 8/8 update with photos __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Dutch Passion was the second European cannabis seed company, founded in Amsterdam in 1987. Their mission is to provide the recreational and medical home grower with the highest quality cannabis seeds available. Anonymous shipments !! ( no affiliate link) ✅https://bit.ly/DutchPassionSeeds __________________________________________ Did you know that Green Buzz Nutrients fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS __________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ __________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
17
Share
@Dunk_Junk
Follow
Wow she tripled her height this week! From 20cm to 60cm!! She has very long internodal spacing. I note a VERY short veg period in this strain.
Likes
10
Share
Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.
Likes
3
Share
@LX1977
Follow
😞😞😞 mes 2 plantes sont devenues hermaphrodites 😞😞😞 Remarqué ce samedi, une dizaine de poches à pollen dont 2 déjà ouvertes. Certainement un stress mais lequel...?? Fuite de lumière, un coup de froid,...?? Vraiment dégoûté 😞
Likes
5
Share
They all seem to be different phenos, all very pretty looking, nice trichome coverage, the tall plant with small buds has a layer of trichomes on the stems!
Likes
4
Share
@Hylex
Follow
28.09 Neue Woche, neues Pech. Ich denke das ich die neue dünge menge beim mischen verkackt habe naja passiert.
Likes
12
Share
@Hawkbo
Follow
Pics and video were taken a few days ago been busy as shit lately so the update is a little late. I'm gunna put the video up first on all of them then go back and upload the pics so if come back if the pics arent up yet.