Whelp figured out my PH meter was not reading correctly which means I was not balancing the PH of my water correctly....that being said I had been using RO water that *read* it was testing around 7.0, so I was using PH down to 6.5 5/27 - Decided to top the plant. Again with this being my first grow, this was slightly nerve-racking 5/28 - Seems I didn't mess up the top chop, woooh! I tested the PH of my soil today(5.6), if that even tells me anything(I find 2 articles that say it doesn't and another 2 that say the opposite...so that's magical) and ended up just buying a few gallons of distilled water from the store since I didn't want to be running my RO system for my plant and the others in my house.(made sense in my head at the time) Fed a dose of nutrients in the feeding tonight. I believe I was underwatering my plant. 5/29 Forgot to take a picture because I thought I might have overfed the nutes, on the night before.., So I spent the night researching info and trying to figure out if that was the case and how to correct it. But again since I am new to this, I have no clue lol. It also seems I had bumped up the light power from 50% to 100% some how the night before. Ended up dropping it down to 70% power. 5/30 I took the photo, then tied down the main stem. worries of overfeeding have subsided for now... 6/1 Looking extra bushy today. Holding off on defoliation, unless someone tells me otherwise. I am trying to hold off for a few days on doing anything more that could stress out my plant.

Wet and high humidity up to 90% definitely not ideal but every still looks fine no sign of any mold hope there isn't much more rain over these final weeks.

hello growmies! day 51 finally the pre-flowers begin to appear. I apologize for the few photos but unfortunately they really filled the box and I find it difficult. overall I have to say they look in perfect shape! I will keep you updated thanks for passing by. like and comment! good day and beautiful growth to you 🌳🌱

So, bubba diagonal has the sweetest smell, almost like a dank og smoothie probably inherited from the purple punch and the true og, Guava cake is the most "weed" smelling like pure good sativa funky ganja, not very tangy but a little more on the cookies side, and the kmintz... probably my favourite, she has just a strong mint-fruit smell. Its a sweet and fresh zkittlish-fruity funk with a slight dank earth background, and the smell is sweet and at the same time slightly "overpowering" in your nose, almost like its rotten sweet fruit. Cant wait to smoke them. Here are some pics from the last week of flowering guys, can't wait! Smells like heaven😍 supersoil + compost tea is the bomb!!! #teamorganic

Started doing some light defoliation a bit each day on the very low level offshoots and any big leafs blocking main bud sights. Looking back I should have done a bit more earlier on as these are very heavy and leafy plants. At the start of the week my light was at 55%, on 13 Nov I put it to 100% to see how they react. I will monitor to see if they are ready for it but they really took off this last week. My one plant in the back left always appears droopy compared to the others because the leafs on it are so big it weighs down the whole plant. The plant in the back right was always janky and I considered not even growing it. The seed came through a few days later than the rest and I almost wrote it off. Figured I would use it as an experiment and try and learn from it instead.

Que pasa familia, vamos a añadir la octava semana de floración de estas Apple Fritter de RoyalQueenSeeds, empezamos con la temperatura que la tenemos entre los 21/25 grados, la humedad está entorno al 50%, el ph está en 6.2 , el foco actualmente lo tengo encendido 12 horas y la potencia es al 100% de lo que da el foco. También añado la gama de nutrientes de Agrobeta, que no falla, sin duda de la mejor alimentación que hay para tus plantas. Las flores estan tricomandi Muy bien y se están formando buenas flores, estas semanas acabarán de madurar. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

D-77 : Girls are going well and they are beautyful but, they are growing alot less than expected. They are 30cm behind they should be. I hope it is because of all the effort I made on the mainlining process at the beginning....

💩Holy Crap Growmies We Are Back💩 Well growmies we are at 14 days in and everything is going great 👌 👉 Shes a stout little plant , chunky too , im gonna do slight low stress training , still early yet thoe👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks All strains except imperium x/blackberry moonrock are topped and the main got LST clip on i snapped a Branch off one of the hyper glue by being to Hasty the other ones where no problem good week for the 9 plants A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

week intel: it was the time to prune the cover crops this week i chopped them - no problem all good stresses : just a little E.C stress around 1.4 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 707 ppm - 1.4 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster around 275 ppm - 0.57 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with normal dose of Top-Max + B-52 around 213 ppm - 0.42 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : autos do so so so much better with 20 hours light per day pls dont run autos near femenized 1 of them must get sacrificed

Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #9 2020 September 17th. - 24th. General Info: When planted: 2020 July 23th. Week: 9 Days: 56 - 63 Last Update Day: 2020 September 23th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan: Lower: 4" Ram Fan. Upper: 9" Voxon Box Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Water pump: Digital microscope: cheap Chinese USB X4, 1600X. Comment Everything going perfect, girls becoming fatty. I will remove biggest fan leaves blocking budsites and just keep them happy.

So iam into my 2nd week flower. Iv had a few problems but got over them. They are all but 1 about 55". But have a beast in the corner she's 4and half foot tall and looking amazing. On wards n upwards.

Ell A pas l’air malheureuse

Ok, so it's slowly getting thicker and frostier. At week seven my girl could be ready in anywhere from two weeks to four weeks more. The light was dropped closer to the top of the canopy. I decided to try 15 cm of distance, as well four 50W LEDs are not as powerful as the 600W HID or LED panels that are usually used in grow tents. I will of course keep an eye for signs of light and heat stress, but I suspect that won't be a problem. Update Day 89. Today I decided to turn the plant around to see the back colas and their growth. Then I found some mites under the leaves after examining weird spots in a couple of leaves. It seems to me that there was not enough airflow to deter the mites from making home in the back leaves, when compared to the front leaves of my plant. Lesson learnt, rotate plant often, ensure good and even airflow. I didn't find any webs beside a really small one seen on the video (most affected leaf). So, I think I found them mites early. I only found this kind of damage on very few leaves, and each leave contained less than 8 mites (at least that I could see) and a couple of eggs. So it seems that paying close attention to my leaves saved me from an out of control infestation. Anyhow... I removed all of the leaves that had even a single mite, or a single mark of discoloration. Also, I disinfected the grow tent, top of soil and lower part of the branches by spraying them with a 1/4 tbsp of bleach per liter of water. After that was completely dry, I mixed one part rubbing alcohol with 9 parts water and misted both sides of the leaves and even the buds directly (ethanol evaporates easily, so there shouldn't be residues left after it dries completely). I got these remedies from https://www.growweedeasy.com/cannabis-plant-problems/how-to-get-rid-of-spider-mites I will apply them every 3-4 days and keep a good eye on the leaves. Prevention is key, and some aspects I could've considered before are: 1. not grow any other plant next to my cannabis 2. Don't come into my indoor growtent after tending my outdoor plants. 3. Ensure even and plenty airflow. So, I attacked back strongly. I cut more leaves than those that showed damage, to increase airflow. I will be on the watch for pests and will rotate my plant often, as well as spraying a few times every week, just to make sure they don't come back. I also am going to build a kind of metal wire cage to separate the colas further and make it harder for any pest to spread. Its only my second grow, but from what I've read online about mites, it's way more costly (time and money) to deal with an infestation than to strike them hard early. I guess that specially now that I noticed them before they even made webs. Look closely at your girls growbros ! Update day 90. So this morning I. Becker the trichomes and they seem to have gotten more cloudy. I am not an expert at that, but they are starting to be fewer clear and more milky. I will keep an eye on them, but it think harvest might be here very soon, probably closer to the 9 week mark than to the 12 week one (I'm about to finish the 7th week)...

Hi guys So end of week 4 and entering week 5 now. Few issues this week with the feeding of the plants. Dark phoenix are hungry well half of the plants are anyway 🤔🤷‍♂️ so I upped the feed to 1200ppm the dark phoenix didnt mind it as it needed it but my blue cheese suffered and has significant burnt tips on every leaf 😅 I will disconnect this from the auto feeder and flush and add half nutes by hand in a few days. Othere than that the plants buds are growing and getting frosty. Thanks for looking and happy growing guys👌💪💚 Day 37 flower I changed the marshydro tsl2000 to a 400watt hps to finish the job on the scrog along with the bloomplus bp2500 250watt led light. So cheese got burnt quite bad I totally disconnected it from auto pot system and feeding ph 6.5 water only for a week. Dark phoenix is really frosty now still loads of pistils standing on end and filling out now and smells amazing. The next 2 weeks I will keep feeding bloom and top max then I will start the flush on them. Happy growing guys.

#43 clones are maturing too fast I feel. Especially that a mother is ripening normally. I would guess it’s because of poor rooting. It’s the only difference. I keep runoff at around 3 max. Around week 5 the runoff ph started to drop below 6. Even towards 5.5. Both in rockwool and coco.

Only water I gave her the last week only water I decide that this girl would be for bubble hash

Update – Frisian Dew Trim Hash Ich habe den Trim aus diesem Outdoor-Run mit der Eiswasser-Methode zu Bubble Hash verarbeitet, inspiriert von Frenchy Cannoli. Das Material war nicht besonders gut – viele größere Blätter mit wenig bis kein Harz – trotzdem ist gut was rausgekommen. Der Großteil kam aus den 73 und 25 Micron Bags, in 120/160 war kaum etwas. Mit längeren Waschgängen wäre evtl. noch mehr gegangen, aber nach ein paar Stunden hat es mir gereicht. Ich habe das Material getrocknet und zu kleinen "Temple Balls" gepresst. Update – Frisian Dew Trim Hash I processed the trim from this outdoor run into bubble hash using the ice water method, inspired by Frenchy Cannoli. The material wasn’t great – quite a few larger leaves with little to no resin – but still yielded a decent amount. Most of it came from the 73 and 25 micron bags, while 120/160 had very little. Could’ve probably pushed it further with longer washes, but after a few hours I called it. I dried the material and pressed it into small “temple balls.”

🌱 Amnesia Skunk — Grow Update Week 6 From Seed · 12/12 From Seed (Early Flower / ~Week 2 Flowering Transition) Quick Recap (for new joiners) This run is 12/12 from seed, and we are now at Week 6 from seed, which places us roughly in early flower / second week of flowering transition, depending on how one prefers to count. No aggressive interventions, no forcing. This grow is based on observation, leaf positioning, and letting the plant express herself naturally. Amnesia Skunk has shown: • Strong vertical intent • Beautiful internodal spacing • A structure that responds extremely well to simple leaf bending She is clearly in flower mode now and transitioning smoothly. ⸻ 🌡️ Environment Update (and Why It Matters) • Day temperature: ~28°C • Humidity: ~65% Outside temperatures are still on the cooler side, but inside the room things have shifted naturally. As plant mass increased, lighting intensity was raised, and under-canopy lighting was introduced, the room itself became a stable heat source. This allowed us to raise temperatures without adding external heating or forcing conditions. This balance is important because it keeps plant metabolism active but relaxed, especially during early flower. VPD Perspective At ~28°C and ~65% RH, we are sitting in a comfortable early-flower VPD range, supporting: • Active transpiration • Nutrient mobility • Strong gas exchange Nothing extreme, nothing restrictive. ⸻ 💡 Lighting & Atmosphere (Why These Numbers Work) • PPFD: ~600–850 (depending on plant size and position) • CO₂: ~900 ppm The PPFD range allows: • Smaller or lower sites to stay productive • Taller tops to push without stress This avoids the classic mistake of lighting only for the tops and forgetting the rest of the plant. CO₂ at ~900 ppm is intentionally moderate, not excessive. At this stage, it supports: • Faster carbon assimilation • Better light-use efficiency • No need to overfeed to “match” the CO₂ Everything stays balanced. ⸻ 🌬️ Airflow Strategy (This Is Not Random) • Vortex extraction • Cross-winds with multiple fans • Constant, gentle movement across the canopy The goal here is movement, not wind. Vortex extraction keeps fresh air cycling efficiently, while cross-winds prevent: • Microclimates • Stagnant humidity pockets • Weak stem development Leaves move gently, stems strengthen naturally, and flowers stay dry and comfortable as they form. Fresh air, no stress, no stagnation. ⸻ 💧 Feeding & Nutrition Strategy (Why the Change Now) • EC: 2.4 • pH: 6.5 This week marks a clear nutritional transition, guided by plant signals rather than calendar dates. Why pH 6.0+ from now on? As plants enter flower, nutrient uptake priorities shift: • Less focus on pure vegetative nitrogen pathways • More demand for elements tied to flower formation, enzyme activity, and energy transfer A slightly higher pH improves availability and balance of these elements in soil-based systems. The plant is clearly asking for it — posture, color, and growth rate all confirm this. ⸻ 🌱 Nutrient Change Explained • Removed: Terra Grow • Introduced: Terra Bloom — 5 ml/L Why remove Terra Grow now? Terra Grow is nitrogen-forward, designed to push vegetative mass. At this stage, excess veg-driven nitrogen can: • Delay flower focus • Encourage unnecessary leaf production • Blur the plant’s hormonal transition Why introduce Terra Bloom now? Terra Bloom supports: • Flower site development • Structural energy needs • Balanced nutrition without over-pushing foliage This is not a shock change. It’s a handover, and the plant is responding cleanly. ⸻ 🌿 Plant Structure, Leaf Work & Expression Amnesia Skunk continues to show excellent structure. • Leaf bending is the primary training method • No topping chaos, no forced stress • Just guiding light and space This method has: • Opened the canopy naturally • Preserved apical dominance while improving lateral exposure • Allowed the plant to stay confident and upright A few fan leaves were removed during photography — not as a defoliation event, but because they were funky, expressive, and worth documenting. Those leaves tell a story: • Healthy venation • Strong turgor • No deficiency signals • No toxicity They reflect a plant that is fed, lit, and aired correctly. ⸻ 🔮 What to Expect Next Expect: • Continued flower site stacking • Gradual stretch control through posture, not force • Increasing resin activity as flower identity locks in Do NOT expect: • Aggressive defoliation • Sudden stress techniques • Chasing numbers for the sake of charts This run stays calm. The plant leads, we follow. ⸻ 🙏 Final Words Thank you to: • Newcomers discovering this diary • Old souls following quietly • The curious, the critical, the supportive • Genetics, gear, sponsors • And the community as a whole It’s genuinely a privilege to share this space and this process. Amnesia Skunk is doing her thing — and she’s doing it beautifully. More soon 🌱✨ FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it.GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74