Processing
Likes
Comments
Share
Likes
2
Share
@For2itous
Follow
After tap root popped. Put directly into soil/seed tray, covered with humidity dome and put on heat mat set at 78. Once I saw roots I transferred them to final 5g fabric pot
Likes
7
Share
So far I've had two plants pop out from the 8 seeds I threw in the soil (2-30 gallon pots). A ninth seed was germinated later in the season. These are seeds I obtained from the Grease Monkey OG clone I grew last year. I don't mind getting a few seeds from the bees pollinating my plants. I can't say how good that strain is; I recommend it to everyone. I'm happy to have some cross-pollinated offspring. The soil is mostly FFOF, Happy Frog, Roots Organics, some worm castings, worms and whatever has been living in the soil. I recycle my soil and just add more stuff when necessary. I'll try and keep updates this season.
Likes
2
Share
@Morkiyer
Follow
New place outdoor. Bottom two branches and two leaves cut all tops too..
Likes
34
Share
@AsNoriu
Follow
Day 21. I post one day earlier, but its a huge week for them. Cleared space, install chicken wire fence. Added worm castings, epsom salt, mono potassium, calcium nitrate , Great White, Biosys and hope they will be ok. Next visit in two weeks. Root system was good, couple girls had mini root bound on the bottom, so timing was perfect ! Happy Growing !!!
Likes
53
Share
@Roberts
Follow
Grand Daddy Purple auto has germinated and sprouted. She does have some spots on first leaves. I might of got her wet on accident and left her under the light. I will watch if it continues. She had a light feed yesterday to help with keeping coco ph stable, and ready to thrive in. Beside the spots, everything is looking good. Thank you Medic Grow, and ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
7
Share
@vertex8
Follow
Start of week 2 flower today, introducing big bud this week, gave them the full 4ml per litre recommend on the bottles and noted a small mute burn on a few of the leaves but nothing major. Switch to larger reservoir (25l -> 100l) and added bubbler stone as I'll be keeping the feed over 3/4 feeds, this should help keep the food solution oxygenated and fresher. Overall the plant is looking very healthy and seemed to transitioned to bloom food v. nicely.
Likes
9
Share
@MMVSS
Follow
Way Behind But Back On Track! The Plants Are Ready The DWC Is Ready! Am I!? 😆 Going About This COMPLETELY Different. Last Time I Washed The Soil Off And Stuck Them Roots And All Raw Dog Into The Hydro. They Did Well At First! But It Didn't Last They Barely Had ROOTS! This Time We're Following Some New Found Knowledge And Advice, Keeping Lots Of Healthy Bacteria In Our Res With LAB And Keeping Our Plants In Soil! I Will Feed Both The Res And Through Top Water! Wish ME Luck!
Likes
Comments
Share
@Lynx_361
Follow
29.06.2025 Took a clone from each of my Plants on day one of flower. 30.06.2025 Did some LST..
Likes
9
Share
@russrahl
Follow
These girls are exploding like the bomb seeds they are! Always a treat to grow any Bomb seeds in my experiences. I have grown Both Atomic and Widow bomb before and great seeds/genetics and amazing top shelf buds on massive plants. They are really blowing up now there roots are in the water and all 4 have been topped in prep for LST and there screens. I also installed my DIY reservoir cooler and wrapped my buckets in reflective insulation stuff to keep heat out and keep water cool. Will post some results when I test it more...
Likes
18
Share
Welcome to Flower Week 4 of SuperStrains Amnesia I'm excited to share my grow journey with you from my SuperStrains Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Amnesia : Here’s what I’m working with: • 🌱 Tent: 225x150x150 • 🧑‍🌾 Breeder Company: SuperStrains • 💧 Humidity Range: 50 • ⏳ Flowering Time: 10 Weeks • Strain Info: 25%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 20 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to SuperStrains for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore side by side with theyre Hy-Pro Nutriets . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
38
Share
End of week 1. All 3 plants have their true leaves. The stems seem to be developing nicely but I was hoping for more leaf development. I still need to create more humidity. My exhaust fan still vents too much of it. I added a second camera and I hope to start adding some time lapse videos. Overall a good week! Still trying to learn my environment and tweak where I can!
Likes
42
Share
@JBoBz
Follow
I'm really happy about the quality of this strain, but I'm unhappy about the final results.. I think it was a setup mistake in the room, it probably took lots of heat but I got other seeds of it I'll probably will do another diary with her! Okay guys, thanks for the support and we will se in the next room, happy growing to everyone 💚🍀💯
Likes
24
Share
Still giving me a little stretch this week which is fine because there’s still some room. I initially thought they were going to get a bit taller or I might have waited another few days. Either way there’s a TON of cola sites and I’ve selectively removed a few fan leaves blocking them. I turned up the HLG 550v2 to about 90% power and switched the nutes to a higher phosphorus and less nitrogen base. All In all everything is on track.
Likes
9
Share
IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
14
Share
Привет садоводы процес вегитации идет полным ходом и цветку понадобится много времени , что-бы вырасти до хороших размеров поэтому будем наблюдать, как пойдут дела
Likes
13
Share
Just added Mephisto 3 sour crinkles and 2 double grapes to the equation. It was meant to be 4 sour crinkles but one seed still ent popped so I’m hoping it will! On to the grow where I haven’t trained any plants it’s a fight for space but I’m happy with most of the plants few fast buds wedding still ent properly flowered yet week 7 on but am happy with a couple glues and the 3 runtz the runtz is frosty! The grape Walkers are starting to swell and fill out big time I am happy so far with it all had a couple burns and defincys through the 7 weeks so far but got over them! The grape walkers are the big budded plants then the frosty ones at the back are runtz then the rest are glues! Started defoliating plants
Likes
9
Share
Week 6 of flower now not really getting the gains i had hoped for but, the buds are nice and dense and as you can see not short of crystals looking frosty, the smell is amazing very pungent. It's going to be a nice smoke no doubt about that, just not a lot of it. I've put the EC up to 1.3 this week see what difference that makes and boosted my light to it's max 600+ I'm assuming this will be a long flower. Any constructive info would be much appreciated.