Likes
Comments
Share
Je n'y touche plus et laisse faire mère nature.
Likes
75
Share
🍼Greenhouse Feeding BioGrow, Bio Enhancer & BioBloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱GANJA FARMERS
Likes
8
Share
@Oldwied
Follow
Day 30 Kush: + can't find any new hermaphrodite flowers + Continues to grow steadily Happiness: + Lovely sweet smell of candy + Beautiful flower structure +A sea of flowers - Shows lack of appearance in the form of yellow leaf spikes. But only a few leaves. Could also have been too much watering.
Likes
6
Share
Green House feeded one is simply the happiest lady in the tent, growing big frosty buds. Advanced Nutrients one is recovering and growing colorful buds. Both phenos smell like grapes just like described in the name…
Processing
Likes
36
Share
Hey everyone . This week she was left in her 1 L pot, and will not be in the 11 L pot until next week :-). She was topped again and accepted it super 😃. By the time she is repotted next week and given Green House Powder Feeding for the first time, she will have received a small portion of Canna Vega :-). Otherwise it grows very quickly and vigorously, and they look beautiful 😍👌. I wish you all a lot of fun with the new update, stay healthy and let it grow 🙏🏻👍 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Processing
Likes
11
Share
Plant has shown slow but healthy growth since its arrival, LST continues and I've managed to keep the plant at the same height it was last week but now at a horizontal angle. I did up the nutes for one feed to a slightly under recommended dose but in the days following I noticed the plant looking a little 'droopy' and since she has been with me she hasnt been drinking very well so I opted to flush her for a feed, since then she has seemed very happy :) whilst drinking much better (possible nute lock was imminent). Now back down to half doseages with the exception of CalMg (to help after flush) but will be increasing them in the following days. As of next week I will be transferring her and another plant my partner is nurturing into single bucket DWC set ups. Fingers crossed I will see some hearty results for making the crossover to hydro.
Likes
29
Share
@DreamIT
Follow
-Sponsored by: ORIGINAL SENSIBLE SEEDS-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 🏁18/6 hello growerz, with today I start the resumption of diaries on GD. I have 13 new genetics in germination and as many diaries. I start by putting the seeds in water for 24 hours, after a day I will put the two seeds in two different jiffies, one with humic acid from greenhouseseeds and the other with just plain water. Get comfortable and follow the updates 😉👋🦄 19/6 The seeds were divided and placed in two different jiffies, one with humic acid and one with water only. 21/6 after another 24 hours in the dark the jiffies were moved under the lamp. let's start the dances! 23/6 The seed in the humic acid jiffy has already sprouted and is about to open, the brother in the water still nothing visible 24/6 we await the release of the seed in water only 25/6 still nothing on the second suit, I'm starting to worry 30/6 the seed born goes well, the day after tomorrow it will be removed if it is not decided to sprout __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄Highest quality seeds since 1992, a real guarantee! (no affiliate link) ✅https://bit.ly/Originalsensibleseeds __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
14
Share
@Theia
Follow
I’ve spent the last six days recalibrating my grow room. It feels more like a lab now because I am doing a lot of experiments with different variables and this week I have learned an awful lot. After pushing the environment to its absolute breaking point, I had to balance what my eyes were seeing against raw data to identify exactly where the Traffic Jam was occurring. I got so excited at the ability to control proteins in a plant with light spectrum I did the usual thing I do I drove them to their limits. Maximum photons (and beyond) in an environment where the plant just works like a suction funnel with a VPD of 1.6 kPa. What I forgot is that in my organic setup, the bottleneck is the speed the microbial life can create immobile nutrients. Under any normal conditions, the Biotabs 'just add water' method is more than capable of keeping up, but I had to be that guy and push them with 950 µmol of whites. By the time my Emerson burst came on, I was hitting them with around 1150 µmol, not counting the drain from the UV-B! This, on ambient, is just too much to ask; the plants used up all the calcium available, and my microbial life was unable to keep up. This is good to know, as if I wish to grow at this rate later, I will know what I need to add to facilitate that. I'm still blown away by spectral steering and the way proteins in a plant cell work. Grows are not normally still this fun at this stage. ________________________________________ 1. The "950 µmol" Mistake & Conclusion • The Error: I was running the main rig at 950 µmol, but with 4 strips of DRFR engaged, I was hitting a total ePAR of 1150 µmol. • The Failure: This intensity, paired with an aggressive 1.6 kPa VPD, outran the plant's metabolic capacity under ambient conditions. • The Result: 'Pistil Frizzle' on the crown of the Triple Cheese—the delicate stigmas literally toasted under the radiant load. 2. The Calcium Benchmark & The "Traffic Jam" • The Action: I noticed rusty, necrotic spots scattered across the leaf surfaces. • The Conclusion: The plants weren't 'low' on Calcium; the Biotabs microbial factory couldn't mine it fast enough to keep up with the 1150 µmol demand. I have officially flagged an image as my 'Calcium Benchmark' to track this in future runs. 3. The attempt to fix • The Adjustment: I have lowered the light ceiling to 800 µmol (targeting a DLI of 31–36) and stabilized VPD between 1.2 and 1.3 kPa. • The Rationale: This matches the 'spending' of the plant to the 'income' of my organic microbes, allowing the nutrient highway to move smoothly without crashing at the leaf tips. 4. Emergency Recovery: Bactrex & Bio PK • The Action: To clear the jam, I introduced a targeted top-feed of Bactrex and Bio PK to the Cheese. • The Goal: Boosting the microbial workforce and providing a direct PK source to support the Week 5 bulk while the Calcium delivery recovers. 5. Rhizosphere & Water Management • New decontamination for my 10L res refills: 10 drops of ExoThrive Neutralise, 5 minutes of violent blending, and an 8-hour air stone session • The Goal: To strip all residual chlorine and chloramines from my London tap water to protect my Bactrex and Mycotrex factory workers. • Future Intent: Researching the Water2 Pod 2.0 with a Fluoride filter to automate this and ensure consistent, medical-grade hydration. 6. Pot Size & Substrate Logic • The Constraint: Bigger pots are not happening • The Solution: To compensate for the smaller volume, I will increase Bactrex frequency and explore high concentrations of Gypsum (20g per 10L) in future mixes to increase mineral density without changing the footprint. Summary: I pushed for maximum push and hit a wall. By respecting the biological limits of a just add water system, I’m moving toward Environmental Harmony where every photon is used rather than wasted as a stressor. Been a great week for learning. Thanks for passing. Grow well ..
Likes
79
Share
Started the Mexican Airlines seed directly in soil on Tuesday and she broke ground today (Saturday). I've been reading a lot of good things about this strain and am looking forward to watching her grow. Setup: 24x48x72 grow tent 1 Viparspectra V300 300w LED fixture 1 Viparspectra R300 300w LED fixture 1 CFL 100w (26w actual) 4” exhaust fan w/carbon filter 190cfm 6” clip on fan Electric oil filled radiator behind air intake
Likes
16
Share
Defoliated and flipped to 12/12 Slight stretch. Plants didn’t like that I only gave them half veg nutes and half bloom. They look nitrogen deficient. They’ve also shown some calcium deficiency i believe. The uprising foundation is cal mag and sulfur mostly I believe. So it’s good to have
Likes
65
Share
@Polaskis
Follow
Well hello there 👋 thanks for stopping by and joining this journey of my White Widow grow! 💯 So to begin the week I was thinking....should I screw with this lovely girl or shouldn't I....?!?!?! Weeelllllllllll..... I just could not resist and dove right in lmao!!! Now in the new pictures for the week I really hope I've done my research and try and look for documentation about "LEAF LINING" and I am pretty sure there has been no terminology about it so I'm sure there will be critics and I look forward to your knowledge towards this training method for similarities....💯 MOVING ON 🤦‍♂️ Alright here we go.... so the beginning of the week I measured her at 8inchs. She grew a good 2.5 inches in 5 days so I had to top this girl because of height issues in the tent. I ultimately feel this was the absolute best thing for my height and the plant! 💯 and I 100% do not want to kick her early!!!! Now she's grown an 1inch since topping her 2 days ago and the prizes inside are flourishing and are growing like wild fire 🔥 🔥🔥 What until you see them 🤯 So what I have done to the inside this week is what I like to call "LEAF LINING" I basically pin the shoots created by the fan leaves to the actual fan leaf itself!!!! I know right 🤯 This has proven to be very effective which you can see the length of the shoots themselves. (some are 3.5inchs long) The stock of the fan leaves provide a straight path for growth outward! Its truly fascinating! (PLEASE LET ME KNOW IF THIS HAS TERMINOLOGY OR NOT) Ok so I have introduced a new idea to the grow! Adding a Ring of 4 rows of wire that are attached in a circle to the top of the self-wick pot. I have fastened it using Zip ties as I did for the "LEAF LINING" 👈🤪 This was introduced for when those shoots grow out with the fan leaves as the fan leaf can no longer be of support at some point. Cant wait for that to happen. This is going be a wild ride growmies and growmettes!!!! I will continue to show you guys and gals thorough pictures of my training methods moving forward cause I think your going to start to see growers use this method 🤞 Thanks for stopping by and I really appreciate the love and support that comes from the great community of growers on grow diaries!!! Love you all!!! 👊 hey guys and gals! Posted alittlw video so you can get to know me 😆
Likes
9
Share
@Swoky
Follow
We are getting bigger day by day. Maybe web to support this laddies wil be next good.
Likes
11
Share
3/28/25 chopped and humidity was a little high starting off 3/30/25 have them drying at 60% and 70° 4/3/25 Still needing a day or so of drying to be at a stable humidity Beautiful plant. Fan leaves with Triched out patterns visibly everywhere. Even though i chopped quite a bit off of the plant, i still got quite a bit bigger yield than i expected. All sizable nugs. Pulled 65 grams.
Likes
11
Share
They are shorties but are getting packed! 😍 Booth seem on schedule for chop in a couple weeks. 😋 One last for fattening and another to flush it! 😎 💚💛❤️