Likes
Comments
Share
First Week for me to Start Documenting this Grow. It took a while for them to get to this point. Started the Seedlings on the window sill and the growth was pretty slow before i moved my tent from my garage to my house. From there on they grew pretty fine and really enjoyed beeing inside now. This should be week 2
Likes
Comments
Share
Week 4 after another round of LST after 3 day removed tied down but two days later lost again with garden wire
Likes
24
Share
Decided to flip to flower this week. Ramped up to 1.1 ec before flipping. Probably a tad too slow since they look hungry. Will slowly increase. Did some more LST to widen them up a more during the stretch. .
Likes
6
Share
58 days of flowering: I started cutting the most mature apicals 42/57. I will wait for the remaining 7-14 days. first 42: 370.5g
Likes
40
Share
@Dingle
Follow
Week 1 of early Veg I began the feeding schedule this week using the Canna range again for this grow as it worked well on my last run. Trying to maintain 55-60 Rh this week Growing an Auto strain for the first time under the new LED is throwing up some questions but I think all is going ok. These 2 seemed to take quite a long time to settle but are picking up growth now and look to be healthy. I plan to lower the light gradually over the next week to 24inch as they develop further. 🤓 ✌️
Likes
Comments
Share
iniciamos semana con nutricion athena, semana del 31 de mayo al 5 de junio 2026. dejamos en cubeta de 1 galón hasta ver un crecimiento de la raiz avanzado.
Likes
5
Share
Massive heat wave still here. I had to reduce the light to 50% (450ppfd) to manage the heat. Plants are doing well and with this heat they smell amazing. G1 is almost ready! I’ll check the trichomes daily to have the optimal window for harvest. G2 is super frosty and it swell a bit from the last week. Frostbanger has 3 really big buds who will swell even more. She is 80cm tall so I’m using some support for the branches to help with the weight.
Likes
2
Share
@Swanberg
Follow
Holy smokes first time washing a full plant and it sure paid off on some unbelievable quality rosin. Pressed70-160 My some of my 160 melt pressed straight thru 25u and 37 u rolled over 2 times tightly. Great surface area maintained in my press and 90% yeild. Excited to dabble in the rosin game. That was my small dinker plant yielded 300 wet grams for the record. 13 grams return for bubble hash. Larger plants processed I’m hoping for better yield. Let the juicing begin
Likes
10
Share
@Rob691
Follow
Today, after 78 days for the lemon kix auto and the Young Pinapple Express, and after 145 days for the old rescued Pinapple Express, I turned off the light. 48h blackout for the 3 girls. Harvest on saturday.
Processing
Likes
7
Share
@Encuentra
Follow
24.11 : C+4 25.11 : C+4 26.11 : C+4 33cl of fertilizer for all 28.11 : the hydro are turning yellow, i think i will put them in soil, maybe they suffocate ?
Likes
33
Share
@Belverde
Follow
Welcome growers Week n°6 is ended, the first in flowering for this two BLUEBERRY CHEESECAKE 🍰 The one that is growing in its most natural form apparently looks fitter than her sister where I have practice a topping technique, but in general they are quite beautiful and healthy.. The plants are starting to show early pre-flowers 🌻🌻 The appearance is not extremely healthy because of me, I was away for a few days and my self-irrigation system did not work properly, leaving the plants in shortage of water 💦 Maintaining the correct proportions between dry and wet soil is essential But they will recover anyway.. In this week I have slightly defoliated to allow the light to penetrate more and also better ventilation ✂️✂️🍃🍃 About the lights cycle 💡 We are now in a 12/12 on / off.. Always under two SP3000, from Mars-Hydro, at 75% of the power.. About nutrients 👇 I still giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) / Bioheaven (Biobizz) , a little bit of P-K 3-5 (Bionova) {in spray solution } and for the firsth time a little bit of Fioritura (Biomagno) and Bloom vegan (Bionova) Like i usually do, a little bit of everything at any watering 💧 And that's pretty much everything i've done.. See you in week n°7 📆 Thanks for stopping and watching 😎👍👍 FC ✌️ 🇮🇹
Likes
14
Share
@Terpyboyz
Follow
Hi everyone 👊🏻 thanks for checking in 😏, so we have started flowering this week on the bigger tent using the 2 Lumii 720w LEDs, we might or might not run into some hight issues well see… And we have the other 1.2 tent set up for the clones there under 1 Lumii 720w led delivered until I can another one sorted few weeks 🤙🏻 get them under that for a few weeks then get them flowering as well. Keep eyes open for progress 👌🏻
Likes
150
Share
Bonjour à tous, Après avoir pris une petite semaine de vacances , ces demoiselles n'ont eu qu'un seul arrosage avant mon départ... Stupéfait que celle ci soir encore en "pleine forme" malgré les chaleurs qu'il a fait et le manque de nutriment !! Elles ont encore grandit.. !! J'ai donc du re faire une sorte de palissage , (Photo before / Photo After). Pour leurs redonner du Peps' comme ont dit chez nous, je leurs es tapisser au pied , une bonne couche de fumier de vache très riche en nutriment et surtout en Azote avec un gros arrosage pour que tous les nutriments puisse bien parvenir dans les racines 👍👍👍 La près floraison est toujours semie présente mais aucune fleurs n'apparaît... Sur aucun pieds... Si vous avez des remarques , je suis preneur !! Affaire à suivre !!!! 🙌🙌🙌🙌🙌🙌
Likes
45
Share
"Mens Dei" What can be made to expand, airy and loose, can also be made to contract, dense and tight. Trichomes do not discriminate, although we like to think of trichomes' primary purpose as being to get us high; they are there to provide photoprotection (sunscreen). Trichomes apply themselves based on area dimensions; the more area = the more trichomes in order to protect. Different from density: Trichomes, the resinous glands on plants, are often produced in response to stress, including high light intensity. This increased production can lead to denser trichome coverage on the plant, stress, stress, stress, stress is the signal. There is a certain beauty in watching the large water-filled buds once swollen to the brim slowly shrink during drying, as the surface areas contract, the trichomes just cluster up to form denser and denser coatings, already dense from high light intensities, UVB exposure, and IPS, and every other stressor I could tweak. Trichomes, the resinous glands on cannabis plants, are often produced in response to various forms of stress. These stresses can be environmental, like excess light(HIL) or UV-B radiation, temperature fluctuations, or drought, or mechanical, such as wind, pruning, or even the weight of the plant's own buds. The plant reacts to these stressors by increasing trichome production as a defensive mechanism to protect itself and its valuable compounds like THC and CBD. In essence, cannabis plants perceive stress as a threat and respond by producing more trichomes as a way to protect themselves and their valuable compounds. Several studies have shown this. Not so much a "master" grower as a master of stress. Psssst. Trichomes fill with "antioxidants," including THC. Ant"ox"idants, The production of antioxidants in plants is intricately linked to their oxidative apparatus. The plant has limited oxidative capacity/apparatus. During daytime photosynthesis, a large percentage of that oxidative capacity is tied up in protecting the plant. During the night, plants alter their metabolic pathways. This leads to a far more focused production of specific antioxidants, like THC. Plants also produce antioxidants during the day to scavenge ROS made from photosynthesis. The differential ROS production by blue and IR light can have significant biological consequences. For example, high levels of ROS induced by blue light can lead to cell damage and death, while lower levels of ROS produced by IR light may be involved in beneficial cellular signaling pathways. Long nights under the IR (very low ROS), the boost in cellular respiration, and the boost in energy production. In a perfect world, I'd give the plant a shock treatment of 60DLI in 4 hours and give her the other 20 hours to perform cellular respiration under IR. The stress of those 4 hours would be rigorous and full of stress abound, 1800-2000ppm CO2 is easy for a couple of hours during daylight, it's maintaining it that's hard, but 4 hours is very doable with nothing but a little extra "carbon sugar" in your medium every other night during the first 4 weeks of flower. In my opinion, you only need to jack CO2 for those first 4 weeks of flower to see maximal output, after that it's all about trichome preservation, everything else comes second. Without the temps to assist with metabolism, CO2 is reduced to normal levels along with temps 4-5th week of flower. Buds are primarily composed of water. Developing flower buds, like other plant tissues, require a significant amount of water for growth and turgor pressure, which helps maintain their structure and firmness. Turgor pressure in plant cells is primarily generated by osmosis, but transpiration plays a crucial role in maintaining it. The optimal internal leaf surface temperature for photosynthesis at 1800-2000ppm CO2 is likely in the upper range of 97°F, meaning ambient would need to sit at 102°F-ish or thereabout for full metabolic utilization. That's putting your transpirational pulling force x5 x6 maybe x7 of what it would be if she were cruising at 68F. "My buds won't fatten, what can I do!!" Crank it. If your purpose was to blow up a balloon as fast as you can, as much as you can, would you use 2x force or x5 Force to do so? Bad analogy, but you get the idea. Kiss. Optimize photosynthesis & VPD by day, cellular respiration by night. TECHNICALLY: "While transpiration and cellular respiration are both ongoing plant processes, they are not neatly separated into day and night. Both processes occur both day and night, though at different rates and with different emphasis. Transpiration, the release of water vapor from plant surfaces, is primarily driven by sunlight and photosynthesis during the day, but it also continues at a lower rate at night. Cellular respiration, which provides energy for the plant, occurs continuously, both day and night. " A leaf can perform cellular respiration and photosynthesis simultaneously. During daylight hours, plant cells utilize both processes: photosynthesis to produce glucose and oxygen, and cellular respiration to break down glucose and release energy for the cell's needs. The products of photosynthesis (glucose and oxygen) are used as reactants in cellular respiration, while the products of cellular respiration (carbon dioxide and water) can be used in photosynthesis. The limiting factor is the oxidative capacity; the less a leaf is utilizing photosynthesis, the less oxidative capacity it uses, and the more it can perform cellular respiration. Even if a leaf is not in an optimal photosynthetic position, it can still utilize respiration to its full capacity during daylight hours. Kinda too much info to explain when some asks if they should defoliate or not, yeah add calmag or some shit. BUT Only 10% ATP can be processed through photosynthesis and carbon capture. 90% of ATP is processed when the plant's oxidative capacity becomes available (NIGHTTIME). Cellular respiration relies on the process of oxidation to generate energy. Specifically, the final stage of cellular respiration, called oxidative phosphorylation, utilizes oxygen as the final electron acceptor to produce a substantial amount of ATP, the cell's primary energy currency. Factors such as oxygen concentration, glucose availability and temperature will all impact the amount of aerobic respiration an organism will perform. See you next grow, *twiddles thumbs*
Likes
13
Share
7/13 It's maine-ing out. Overcast and misting. I guess it rained last night but not much. Today is my watering day although I think they could've made it until tomorrow. These drastic temp changes makes it hard to get a STEADY routine in place. I watered everything in the 20's a gallon the 10's 1/2 gallon. The 10th planet in the front was still heavy so I didn't water it. I'll keep an eye on it. Temps are much milder. I noticed a few more septoria leaves on the 10th planet which I promptly defoliated. This pheno is flowering. I could've put this week as flowering as several plants have started. I also saw ONE leaf on my chem dog that had septoria on it. ONE f-ing leaf! I was planning on treating this early anyway so I mixed one gallon of plant doctor 3 tsp gallon/gallon which was the recommendation. I'll monitor this plant and continue treating it the next two weeks. I may do foliar too but the mixture is different. It's a systemic so I don't think that matters as much. Considering getting mulch to protect from spores on the soil. My plants look GORGEOUS. I Hate to use such a nice plant as a guennie pig but I'm not going to sit here and watch it progress. I'm lucky it's really not that bad and that it's on a reveg. There's so many leaves that I would be forced to prune anyway. I'm seeing two MAYBE three leaves a morning but I want to get this under control. Last year u let a plant with septoria go and it finished but went to extracts. I've got a pretty good feeling about this plant doctor. I've used it before with good results. Only time will tell though.🤞