Hi everyone I am back the grow room has been redone NEW EQUIPMENT, NEW SEED COMPANY NOW using Seeds from the NIAGARA SEED BANK https://niagaraseedbank.com/ Added Vivosun 6 inch Inline intake Fan 240 CFM, Added a New 1000 watt Led Grow Light 1000W Full Spectrum Sunlight 3500K White and 660nm Red Added { SMD CHIPS } Draw from wall 200 watts. ( Old LED blew the veg side of the light } Added a 9" NanoDome with a 18" T5HO grow light for seedlings and clones. Added another 24 x 48 x 60 tent for vegging. Added a New Oneo LED Grow Light 1000W Full Spectrum Grow Light with veg and bloom switch {red & blue}. Draw from wall 180 watts for veg tent. { Manufacturers replacement for burnt out light } Added a UVB 5.0 Lamp 26w, LED for the flowering tent that will run 5 hrs. a day. HAPPY GROWING TO ALL ---------------------------------- STRAIN INFORMATION ---------------------------------- Strain - Bubba Kush. Feminized. Breeder - Niagara Seed Bank. Linage - Bubblegum x OG Kush - Indica Dominant Hybrid. Flowering - 7 to 9 weeks. Cannabinoids - THC 14% to 19%+. CBD - <1%. Terpenes - Caryophyllene {Peppery}, Limonene {Citrus} & Myrcene [Herbal}. ----------------------------------- SEEDLING STAGE WEEKLY LOG. ----------------------------------- Light set at 30" above seedlings. Light Cycle 18 on 6 off. - on 6 am - off 12:00 am. Seedlings receive a Foliar Spray every morning - Of Advanced Nutrients Micro & RO water. Mixture 2ml per liter RO water. ------------------------------------------------------------------------------------------------------------------------------------------- Week 1 --------- 09/11/19 - 2 seeds soaked for 18 hrs. in R/O Water then placed in paper towel. 11/11/19 - Both seeds sprouted tails and were planted in tiny 7" pots in a mixture of 2/3 soil to 1/3 Coco Coir and clay pellets added. 11/11/19 - Both 7" pots were placed in NanoDome with 18" T5HO grow light. With a light cycle of 18 hrs. on 6 hrs. off. 13/11/19 - Both seeds sprouted at the same time and growth is consistent with both seedling growing at the same pace. 16/11/19 - End of week 1 seedling stage. -------------------------------------------------------------------------------------------------------------------------------------------------- Week 2 --------- 18/11/19 - Both seedlings were transplanted into 3 gallon smart pots their final home and placed in tent with a 1000 watt full spectrum sunlight LED.With a light cycle of 18 hrs. on 6 hrs. off. 18/11/19 - The 7" pots had roots right down to the bottom and showing on the sides when transplanted good healthy white roots. 19/11/19 - Plants received their first feeding 1 Liter each of Miracle-Gro 20/20/20. Mixture is 1/2 teaspoon to 4 liters R/O water. 21/11/19 - Both plants Blue 1 & Pink 2 are showing signs of growth since transplanted { see pic's}. 23/11/19 - Lowered the light from 30" to 22". 26/11/19 - End of week 2 seedling Stage, Plants were fed 2 liters each of Miracle-Gro 20/20/20 with Advanced Nutrients Micro mixed in.😃 ------------------------------------------------------------------------------------------------------------------------------------------------------- Week 3 --------- 27/11/19 - Today is the start of Week 3 of the seedling stage and both plants are doing great they are both growing at the same rate and the leaves are very wide. {See Pic's} 30/11/19 - Today is day 18 since the seeds sprouted and the plants are showing some nice growth. 30/11/19 - The plants have very broad leaves the sign of a true Indica. { OG Kush } 30/11/19 - 4th true set of leaves starting to come out. {See Pic's} 01/12/19 - Plants received 2 Liters of premixed 20/20/20 today. 01/12/19 - Plants are popping their 5th set of leaves Veg. Stage will start end of week 3 seedling stage. 03/12/19 - Today is the last day of Week 3, & the last day of the seedling stage. Both Blue 1 & Pink 2 are 7" tall. { See Pics }

I’ll be honest, for my first grow and harvest, I’m stoked to have pulled this much weed off of these plants. Though I did dry them too fast with my given conditions so the planty “green” smell, isn’t quite gone yet with a 4 week cure and going. That’s fine though. Everyone that smokes this, loves it. Really heavy body high with a couch locking effect. Munchies set in heavy shortly after lol I personally don’t smoke much but I offer some to everyone that comes through my door. I would for sure run these again but maybe in larger pots. A bunch of folks say that these only require 1 gallon pots but I can tell that they would’ve for sure grew larger if given the space. 10/10 would recommend to beginners.

03.07.25. Day 64 Plants are looking good. Due to lack of space and other plants fulling out their relative tents I am going to take these ladies down soon. Even though they can go much longer. Also temperatures are high which is bad as this can lead to terpene being loss. I don't want to but I think it is necessary. Until next time. Peace!

Eternity Grow Cup - Week 9 Veg Update We are stepping into Week 9 of vegetation, and things are getting exciting! The plants are thriving—compact, bushy, and growing beautifully. This week, we introduced a SCROG (Screen of Green) net, an essential tool for maximizing yield and optimizing plant structure. Let’s dive deep into the why and how of scrogging: Why Install a SCROG Net Now? Maximizes Light Exposure: The net allows even light distribution across all branches, ensuring every bud site gets the optimal amount of light. Controls Plant Height: By guiding the branches through the net, we keep the canopy even and prevent excessive vertical growth. Enhances Airflow & Reduces Mold Risks: Spreading the plant out increases air circulation, reducing humidity pockets and minimizing risks of mold and pests. Increases Yield: More bud sites exposed to light mean higher-quality flowers and greater overall production. For now, we’re still not using the under-canopy lights, though they will come into play soon. The ICL 300 is positioned strategically, and we will likely move them around as needed later. For now, the focus is on structuring the plants and ensuring they fill out the available space properly. Optimizing Airflow - The Vortex Effect Air circulation is crucial for plant health, and this week, we’ve optimized airflow by positioning the fans to create a vortex effect: Fan Positioning: Each fan is placed at the tent corners, pointing in different directions, ensuring dynamic airflow instead of direct wind hitting the plants. Benefits of a Vortex System: Reduces hot spots and evenly distributes CO₂. Strengthens stems by creating a natural resistance. Prevents stagnant air, reducing mold and pest risks. The extraction system is powered by an AeroFan, connected to the AeroFan Smart Remote FRC1, currently running at 60% speed. This setup efficiently manages humidity and temperature while maintaining optimal air exchange. Current Environmental Conditions & Feeding For now, we’re maintaining the same water schedule and nutrient regimen. The environmental conditions remain stable: Temperature: Holding steady at ideal growth levels. Relative Humidity: Balanced to encourage healthy transpiration. PPFD (Photosynthetic Photon Flux Density): Kept at optimal levels to support vigorous vegetative growth. CO₂ Levels: Elevated but within safe limits, promoting faster growth. The plants are filling the space beautifully, but we know that the flip to flower is approaching soon! The next phase will depend on how fast they continue to spread, and adjustments will be made accordingly. Closing Thoughts & What’s Next? This week was all about structural optimization—ensuring proper airflow, training the plants with the SCROG net, and keeping everything in balance before the transition to flower. The upcoming weeks will be crucial, as we fine-tune the environment, possibly introduce the under-canopy lighting, and prepare for the flowering stage. A huge thank you to our sponsors Aptus Holland, TrolMaster, CannaKan, Grove Bags, Ziggi Papers, and of course, Zamnesia, Plagron, and Grow Diaries for making the Eternity Cup possible. And to our incredible community—followers, supporters, and even the critics—we appreciate every single one of you! Stay tuned for next week’s update, and don’t forget to follow along on YouTube and Instagram for exclusive content and behind-the-scenes looks! See you soon, and happy growing! Let’s keep pushing forward, and best of luck to all the competitors—we’re all growing something incredible together. Until next time! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

Growing great. Looking for next week news

Happy Christmas every one Growths been good topped all plants topped a couple multiple times Only feeding them roots water and enzymes for now giving them 500ml everyday There looking a bit on the skinny side so will be adding some silicon at some point this week Ad quite a thew problems with the other diaries so it's nice when this one going right you know what they say you can't make the same mistake

Inizio 5 settimana di veg.. ancora una settimana e poi in fiore Oggi 6/2/2025 passato a 12/12

This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.

Another week down! 😁 Everything running smooth. 😃 Finnaly a grow without so many issues 😂 And cold weather so I can push the led to the MAX 😎

Easiest week so far, no problems just growing. I did spray some neem oil on my soil a few days a go to keep pests out of the fox farm soil. Week 4 will bring in topping after the next node grows in, should be 2 or 3 days. Also towards the end of the week after she recovers from topping I will begin LST. Will provide pics throughout the week Posted first vid in real light not my 600 watt LED. Mainly for health purposes. This will be so interesting to see how blueberry will develop after an accidental FIMing lol. Personal Note: Wait to top when there is a full mainstem and not barely new growth. Meaning wait til the new growth has 2 fan leafs spread out, and not when they are just leafs barley sprouted from the main stem. Rookie mistake number 1 so far at the end of week 3. Or maybe time will tell if blueberry will be gracious enough to be a beautiful big buded tree. I read where FIMing can develop up to 4 extra colas and still grow beautifully. Fingers crossed.

Hallo zusammen 🤙. Heute ist ihr letzter Tag morgen wird geerntet. Sie riecht richtig schön nach Zitrone und Haze richtig geil 🤤🤤🤙 Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent

Scrog baby Test läuft gut. Die Marshydro hat 10 Watt mehr deshalb wird sie aber nicht gedimmt. Da die SANlight bessere Ausleuchtungen haben für die Pflanzen.

On day 1 the plants are looking good. I confirmed that my one cola was seeded, so I removed all visible seed pods. After this run I will do a deep cleaning to make sure there is no pollen in my grow box. The rest of my plant colas seem fine... I changed out my reservoir and adjusted the PH to 6.1. I also dimmed my light to 75% to mimic spring conditions. On day 2 I adjusted the PH of the reservoir down to 6.1. The plants are looking great besides a few fox tails from too much light. On day 3 the PH in the reservoir is 6.2. On day 4 I diluted my reservoir with plain water to lower the ppm down to 400 ppm, and I adjusted PH to 6.2 . The buds are ripening for sure and smell great! I haven't gotten any autumn colors yet even though I have dimmed my grow light and lowered my night time temps. I hope by 8 weeks the plants will have some more purple tones but if not I'm good with the flower quality thus far :). The breeder says 7-8 weeks so I'm hoping I am close to the finish line. I will continue to monitor the trichomes for ripeness. On day 5 I adjusted the reservoirs PH to 6.0. I harvested my seeded cola on Pheno #1 as it had stopped growing/ripening and would be a good tester ;) On day 6 the reservoirs PH is 6.2. On day 7 the PH is 6.0 50 % pistils have turned amber so I believe I have entered my harvest window and expect to flush and harvest soon:) very excited!

Guys and gals I'm back and am I suprised Rhino Ryder number 2 start of week 8 of flowering one more week to go also did another flush today !! The fade is beautiful guys the smell is off the charts I keep my tent door open and my room smells amazing!!!

I'm glad that this grow is slowly coming to an end. There are currently 2x Sherbelato Cake and 1x Ayahausca Purple & 1x Candy Bubatz in the Tent. Next time I will only grow in water.

05/12/21 - PRE FLOWER: The plants have certainly grown in size and most bud sites are showing the beginnings of pistils. - Some leaves have purple spots - This could be phosphorus deficiency. I am feeding a healthy dose of blooming nutrients - so this could be a heat issue as the temp does get below 20 often. I have decided to invest in a heat mat. Had to defoliate some bud sites on some plants as I was an IDIOT and but a blow fan heater close to warm up - so I have lost some bud sights maybe 10% overall - lesson learnt. I hope this hasn't stressed the plants out too much. Lights are at 100% brightness.

It doesn't get much light because my pound cake has grown thicker than I expected... maybe it will still produce some good buds.

Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney