Nice easy week just added some Bud Start by future harvest to the mix of nutrients. Little buds are stating now! Can not wait to see how they start looking over the next few weeks!

Lit marker from lit farms is going to be another winner from lit farms. I can really see the growth structure from the permanent marker plant I grew in the past. Also the plant has taken on the same bud structure as the gas cream Runtz and one of the bubble og phenos. You can really see the lit og bud structure show through in a lot of lit farms plants. Really tight round nugs with the most interesting curly hairs. Everything with this bud structure I’ve grown has a great gas smell under a candy smell. This plant is also starting to have the same kinda fade to the leaves as the permanent marker I grew b4.

Remember that, however you are played, or by whom, your soul is in your keeping alone. Even though those who presume to play you be kings or men of power, when you stand before God, you cannot say, 'But I was told by others to do thus,' or that virtue was not convenient at the time. This will not suffice. Remember that. Day:18 84°F and 65% RH (VPD) for the vegetative stage. Approximately 1.15kPa(assuming leaf temperature is about 2°F cooler than the air), which falls right into the ideal vegetative sweet spot (0.8kPa to 1.2kPa). At 1.15kPa, plants can draw water and nutrients efficiently without risking stress or wilting. It keeps the leaf pores (stomata) open, allowing for ideal carbon dioxide intake and maximizing vegetative growth. VPD is determined by the leaf's temperature, not just the ambient air. Because leaves usually run 1° to 3°F cooler than room air under bright grow lights, my actual VPD will be slightly lower, closer to the 1.0kPa mark. As she transitions from vegetative growth to flowering, one can gradually lower the humidity (to around 45–60%) and drop temperatures slightly to prevent disease from settling inside dense buds when they appear. Night:6 At 70°F and 60% relative humidity, Vapor Pressure Deficit (VPD) is 0.86 kPa. This is right on the cusp of whats optimal for the vegetative stage. During the nighttime, plants generally close their stomata and undergo cellular respiration rather than photosynthesis. Transpiration slows to a near stop, making VPD less critical at night than during the day. However, maintaining a nighttime VPD between 0.8 and 1.0 kPa is highly beneficial in that it ensures the air is dry enough to prevent powdery mildew or bud rot, but moist enough to keep the plant from undergoing unnecessary stress. This range keeps the environment comfortable for cellular processes and prevents large atmospheric swings. Keeping it all flowing. (Not pushing them yet, these are photoperiods) The optimal soil (root zone) temperature for cellular root respiration and nutrient uptake in cannabis is between 68F & 72F This narrow range balances biological energy production (cellular respiration) with the dissolved oxygen levels in the soil, maximizing plant growth and health. Warmer soils hold significantly less dissolved oxygen. When soil temperature exceeds 74F oxygen depletion occurs, inhibiting cellular respiration almost entirely, At 68-72F root cells generate optimal adenosine triphosphate (ATP) via respiration to power root-tip elongation and the active transport of water and nutrients. Too Hot (Above 78F) Root respiration increases, demanding more oxygen, while the water's oxygen-carrying capacity drops. This creates a prime environment for anaerobic pathogens and Pythium (root rot). Too Cold (Below 60F) Root metabolism and cellular respiration slow to a crawl. This severely impairs nutrient and water absorption, leading to yellowing, wilting, and phosphorus deficiencies. A lot depends on whether it's automatic or photoperiod; with photoperiod, there is not as much of a need to push "hard" as the real countdown only begins once the flower is initiated. Automatics, on the other hand, the chronological "clock" begins ticking the moment the seed germinates. It is of critical importance that the seedling growth gets off to the races, understanding that early growth is like compound interest, which will pay off come harvest. This reality is why getting autoflowers "off to the races" early on yields such exponential benefits. The "compound interest" is directly related to the surface area of the leaves. Larger, faster-growing seedlings process more light and build bigger root networks early on, which translates into an explosion of vertical and lateral growth during their short vegetative window. The margins for error are so thin with autoflowers; this early-stage momentum depends on several critical practices. Seedlings exposed to increased atmospheric CO2 levels early in life will develop at an increased rate. To effectively "extend" or optimize the capacity of Photosystem II (PSII) for increased photosynthetic efficiency. In standard oxygenic photosynthesis, Photosystem II (PSII) is naturally limited to the red-light spectrum, peaking at 680nm. Extending its light-harvesting capacity past 700nm into the far-red region requires bypassing the natural limits of standard chlorophyll a. Adding 730 nm (far-red) LEDs alongside standard red/blue lights has been shown to increase canopy photosynthesis by 20–30% in several crops by acting synergistically with shorter wavelengths. However, the limitation is that excessive, pure IR/Far-red light (without accompanying red light) can trigger the "shade avoidance response," causing plants to grow tall, weak, and spindly rather than robust. Utilizing infrared light (specifically the 700-750 nm far-red range) is a viable method to boost photosynthetic efficiency. It acts as a bridge to allow PSII to utilize a broader spectrum of light, breaking the traditional 700 nm barrier. UVR8-mediated signaling (often in conjunction with CRY proteins) triggers protective mechanisms that maintain the stability of the photosynthetic apparatus (including LHCII and reaction center proteins), thus ensuring that the efficiency of Photosystem II remains higher in UV-B-exposed plants compared to plants lacking this receptor. ΦPSII indictates the rate of electron transfer from water to plastoquinone, which drives the production of ATP and NADPH. There is a close link between ΦPSII and the true rate of CO2 fixation (Φ*co2). ETR stands for Electron Transport Rate. It measures the speed at which electrons are moved through the thylakoid membranes in a plant's chloroplasts during the light-dependent reactions of photosynthesis. Infrared light (particularly Near-Infrared or NIR) improves cellular energy by interacting directly with the electron transport chain (ETC) in mitochondria. This process boosts adenosine triphosphate production, which acts as a metabolic coefficient multiplier by accelerating enzyme activity dramatically. Extend then multiply. Far-Red photons interact with plant photoreceptors to accelerate the plant’s biological "clock" or trigger a shade-avoidance response. Autoflowers don't use the plant's biological clock, although the IR will initiate a shade avoidance and make them stretchy. You can just add equal measures of 660nm-680nm to negate the shade avoidance effect. Replacing nights' "darkness" with a combination of IR+ and 660nm. Because autoflowers don't require a dark period to flower, many growers just blast them with light. 18/6 24/0. However, this ignores the plant's metabolic rhythms, where daytime photosynthesis (light reactions) must be perfectly balanced with nighttime carbon fixation and assimilation (Calvin cycle) to avoid bottlenecking plant development. Cellular respiration is a 24/7 process, but it can only function while the plant has the free oxidative capacity to do so. A 100% photosynthetically active leaf cannot perform cellular respiration. The viral trend of defoliation of every leaf that isn't "getting enough light" is of great detriment overall, putting 100% of the cellular respiratory "workload" and responsibility on the 0/4/6 hours of darkness in sub-optimal conditions for enzymatic activity. Photosynthesis captures nearly 100% of the initial energy as carbon, while cellular respiration is the process that unlocks 90% of that captured energy into usable ATP so the plant can use it. Respiration is considered roughly 30% to 40% efficient. It captures enough of the potential energy in glucose to synthesize around 30 to 38 ATP molecules per glucose molecule. The remaining 60% to 70% of the energy in the sugar is not captured in ATP; instead, it naturally escapes into the environment as heat, which helps regulate plant temperature. In plants, the primary enzymes of the Electron Transport Chain (ETC) and the ATP synthase complexes are typically adapted to function optimally in warmer temperatures (roughly 25°C to 35°C depending on the specific plant strain). As temperatures rise within this physiological range, molecular collisions increase, speeding up respiration and ATP production. The cannabis plant has a branched respiratory pathway. During heat or cold stress, plants activate Alternative Oxidase (AOX). AOX burns sugars to dissipate energy as heat rather than coupling it to ATP production. This pathway actually functions optimally at elevated temperatures to help protect the cell from the damaging build-up of Reactive Oxygen Species (ROS) during heat stress. Enzyme activity generally scales with heat; there is a strict biological limit. If canopy temperatures in a grow room exceed 40°C, the enzymes and their supporting lipid membranes lose stability. Not saying you need to go crazy, just optimize nights the same as we optimize days. Phosphorus is the driving force behind early seedling development. It acts as the "energy hub" of the plant, directly driving cell division, robust root growth, and the creation of DNA. Without an adequate, easily accessible supply early on, the plant's overall growth potential and final yield can suffer permanently. E=MC2 looks like a simple multiplication problem; it describes a fundamental physical truth: mass and energy are the same thing. The equation doesn't just calculate a value; it reveals that mass is effectively "congealed" energy. Energy is just numbers. Energy isn't a physical "substance" you can hold or touch. It is essentially an abstract, calculated number that we assign to a system to predict how it will change, interact, or move. A numerical label we attach to matter to track how it behaves. Because the universe runs on laws of symmetry (specifically, that the laws of physics don't change over time), a single global number must be conserved. We call that number "energy". We don't grow; we facilitate energy conversion. How well a seedling grows is essentially down to how much knowledge one can acquire to increase the level of conversion to occur. Applying knowledge effectively requires intuition, which comes from hands-on experience. A seasoned stoner learns to read subtle signs—like a slight change in leaf turgor (stiffness), subtle color shifts, or the specific texture of the soil—before a textbook diagnosis can be made. Ultimately, growing is the application of botanical science blended with active observation. Knowledge dictates your potential, but adaptability and attentiveness to the plant's immediate environment determine your results. 1.618 nature mathematically optimizes quantum energy transfer and light absorption efficiency within the photosynthetic machinery, as it naturally dictates energy scaling hierarchies and resonance dynamics. External vibration or electromagnetic wave that perfectly matches a plant's natural frequency directly influences plant growth. Low-frequency sound waves and targeted electromagnetic fields stimulate cellular processes and boost photosynthetic efficiency Does it produce better yields? How long is a piece of string? As long as you cut it. But isssss the juice worth the squeeze? The quantum framework of the IVM seems to think so. Good enough for the quantum firmware, good enough for the DNA software. Genetics are not dictated; they are expressed; the rate of that expression is dictated by the environment in which growth occurs. Quantum Coherence in Photosynthesis occurs When a photon of sunlight strikes a leaf, the energy it carries must travel to a reaction center to be converted into chemical energy. This process operates at nearly 100% efficiency. If the energy moved in a traditional "bunching" or random hopping manner, a large portion of it would be lost as heat. Instead, plants utilize quantum superposition. The energy particle (exciton) doesn't just take one path; it exists in a wave state and explores multiple pathways simultaneously. It essentially "chooses" the most efficient route to the reaction center simultaneously. Research shows that molecular vibrations and the specific network arrangements of chlorophyll molecules (like the naturally evolved Chlorophyll A & B ratios) actively protect against energy overflow, optimizing light capture across different light intensities. Enzymes are the biological catalysts that speed up chemical reactions within a plant's cells, allowing them to grow, metabolize, and repair. Rather than relying solely on the classical kinetic energy of molecules colliding, plants use quantum tunneling. Subatomic particles like electrons and protons (hydrogen ions) can literally "teleport" through energy barriers that they normally wouldn’t have the energy to climb over. This makes vital metabolic reactions happen far faster than classical physics could ever explain. Chloryphyll b has peak absorption at 460nm (Blue) and at 647nm(Red). If we take the blue peak wavelength 460nm and a UV-B, UVR8 peak absorption wavelength 285nm, Tryptophan-285 (W285) Sensing protein. 460/285=1.618 Φ If we take chlorypyhll b's Red absorption peak 647nm and a UV-A of 400nm, we get 647/400=1.618 Φ. "Structure of light". The cryptochrome photoreceptor (CRY) is a UV-A/blue light receptor that shares this dual sensitivity with several other biological structures and functions, including significant sequence similarity and a common evolutionary ancestor with DNA photolyase enzymes. These are light-activated enzymes that use blue/UV-A light to repair DNA damage caused by UV-B radiation in plants. Synergistic. But Shhh, it's a secret. Effective quantum efficiency of photosystem II, often denoted as ΦPSII, represents the proportion of light absorbed by Photosystem II (ΦPSII) that is actually used in photosynthetic electron transport. It is a key indicator of how efficiently a plant is using light for photosynthesis, as opposed to losing it as heat or fluorescence. ΦPSII (effective quantum yield of photosystem II) functions primarily as a "multiplier" (a coefficient of efficiency) rather than an additive factor when estimating the overall photosynthetic electron transport rate (ETR). Multipliers are considered far more beneficial than additions because they generate exponential growth, leverage existing resources to their full potential, and create sustainable, self-multiplying capacity, rather than just incremental, linear increases. This fascinating observation is rooted in the intersection of subatomic geometry, fractal scaling, and quantum dynamics. In specific molecular arrangements—such as in conjugated polymer networks or biomolecular architectures—the Golden Ratio (PHI) naturally dictates energy scaling hierarchies and resonance dynamics. Mathematically tied to the fine-structure constant, which defines the strength of the electromagnetic interaction. The Golden Ratio can be mapped geometrically as the Golden Angle (137.5 degrees) in atomic structures, linking the charge of the electron to fundamental quantum constants like Planck's constant. Electromagnetic. The Golden Angle (137.5): This angle is derived from the Golden Ratio (1.618). It is the smaller of two angles created when a circle is divided such that the ratio of the arcs equals the Golden Ratio.

Buenas! Venimos notablemente, tratando de mantener un clima entre 50-60 de H y 24-27 de T. Subimos el Led a 80% y ya le estamos subiendo la dosis de ferti y aditivos. Esta semana ya comenzamos a notar el engorde, y la intensidad de los olores muy marcados. Fenotipo 5: La mas resinosa, internudos mas largos, olor a pomelo y las flores son mas chicas. Puede quedar violeta. Fenotipo 3: cogollo grande y compacto, internodo mas corto, terminando en punta. Olor a tropical, piña 🍍. Fenotipo 4: cogollo muy denso y resinoso, con olor a piña 🍍 tambien pero con un toque banana 🍌. Fenotipo 2: el cogollo super denso y grande, pura resina. Olor no tan fuerte, pero es citrico vomp una naranja 🍊

Welcome: thanks for dropping by. Drop a like so I can check out your grows, or not, I'll leave it down to you. So, the fun begins with Kosher Cake. Have 6 in the ground FB seeds in the ground only 1 kosher. The 2 Strawberry Gorillas are still not there with germination. Have started these on the 3 nutes above. These are best known as Voodoo Juice, tarantula and Piranha. These versions are from the ppl who hold the pattens and make a lot of ANs formulas. They have just improved upon most of the AN line up but they kept these the same. As they are tried and tested. Going to be running this lady on the full 19 Terra Power Line up. You can check these out on led-grower.eu/terra-power/ and read up on them for yourself. I'll be adding what's in them as for these 3 if you are interested look up Voodoo, T&P. Hopefully soon you'll be able to click on them and look em up when they join GD in the next wk or so. Happy with how the nutrients are holding a stable PH at 6 and these aren't even their PH perfect nutrients. So no PH - + needed. Sprayed each plant expect 1 gorilla zkittlez, for that 1 I used ANs line. These recommend 1ml/l for seedlings, AN I used 1.5ml/L. I use to use 2ml/L but they are seedlings so it's enough. Just a waiting game now. Will update as soon as these ladies start a popping. I laid a damp towel around the pots hopefully it'll up the RH. (Don't soak the towel it needs to be able to dry easily and in turn increase RH) Sprayed each 5 plants with this line up to start them off. As soon as leafs show I'll start them on a very very light feed. Will feed again in 2 days with the same mix. Another 100ml 1ml/l of each 3ml/l total 627ppm 6ph 21c temp. Have the smart intake fan at no 4 on 100% of the time. If I can't get desired RH after a day or 2 I'll turn the intake fan on 20/20 on/off and it'll make the RH be above 70% by doing this alone in a small space like 70x70. I really don't think I'm gonna have an Issue with low RH, but I have a feeling I'm gonna pay to have a low RH environment. 30/4/22 VD1. Have started her on jungle juice trio and a mix of terra Power enzymes and all there bud/resin enhancers will be used in conjunction with half strength recommend jungle juice dose. The feed is so low I've made up a 1l mix and that will do this and the 2 banana purple punches also. And I'll move that up to 1ml/L x3 of the jungle juice products next week. But for this week what's up above will be given every 2 days or when needed. 1/5/22 Slow growth on VD2. She's the runt most are reaching 2.5cm 3+ nearly on 2. Let's see what happens she's out of the ground and showing fan leafs, yday she had a crusty head. So all in all, going well. 6-8 FB seeds are up and thriving. 2/5/22 She's picked up fine. Got some height to her. Will continue the same course and watch her grow. Will update once more on on size and daily pics. 4_5_22 All Jungle juice&Terra Power grows are showing deficiency signs. I'm going to push up the EC this week I think. I do not want to stall them but I really think EC will be high in jungle juice because of the micro it has SO MANY TRACE nutrients it's crazy and it sends the EC sky high but there's so much of little bits of this and that I really think it can handle a higher EC. I'm going to 2x it or up it by a 1/3 for their watering 2moro as they were only fed yday. I've added biobizz calmag to help as my tap water is lacking cal mag when it comes into summer or so it stays on our water reports. It drops by 20%. 6/5/22 So, it's begun. I've created a negative pressure environment, 1st time, let's see if it makes an impact. On wk 3 onwards I'll be running the intake extraction for 5mins every 30mins and I'll have 2 co2 bags up. If the RH becomes a problem or temp I'll put the extraction/intake back on 100% of the time. The extraction fan/intake is set at a ratio of 2 to 1. (100% extraction 50% intake) making a negative pressure environment, best way to show you have done this, the walls in your tent should bow in lightly. Same Day. Okay, so this my last update. Going to run fans the same right up until flower and then I'll be sealing up my tent and adding 2 co2 bags. And will be adding a dehuimifier and setting at 45% And it checks every 30mins and if it's gone up it'll turn back on and bring down to 45 or set RH, so no co2 will escape. The temp will be bordering 30-33c and then when they go into their rest window they'll be transferred to to a negative pressure environment with low temps and 45-50%RH. I'll only be able to do this for the 3 weeks of pre flower. And maybe some more, it depends how hard the dehuimifier will be working, but i want dense buds and only way to improve that is by introducing Co2 and then a negative pressure cold environment for terps. Then I'll be putting them back into full negative pressure environment and the Co2 will be useless, again all depends how it's gonna affect my bottom line. That and I only have 2 intake fans. I'll be going into detail about my Co2 adventures the week before I'll be prepping them to be able to withstand high temps, so I'll gradually bring up the temps the last wk of veg 28c max and that way when I push it to 30-32c in pre flower she won't stress as much Thanks for reading, this will be it as for updates for this week other than her final 7th wk day. Will adjust EC 5th higher or so. gottagrowsometime

Se realiza transplante a maceta definitiva de 20 LT AIRPOT Sigue el riego día por medio

Making butter is not very hard just time consuming but I very much enjoy making it. If you want really good butter you gotta cook slow and for long time. I ground 39 grams of my Granddaddy Purple and Purple Kush with 8oz (227 grams) butter. I decarbed the ground bud at 220 f for 40 minutes. While the bud is in the oven I melt the butter slowly with 1 cup of water. When butter is melted and the oven timer finishes add bud to butter and simmer for at least 8 hours, I did it for 12 hours. Never let boil! Add 1/4 cup water every 1-2 hours. After I will lay cheese cloth over plastic container and strain and squeeze all the goodness out. The leave in fridge over night, I squeeze the sides and drain excess water from below and butter is all ready. Thanks for checking out my butter recipe. Good luck stay safe happy growing cheers!!!!!

🦅🔥 Dark Phoenix by Green Seeds House 🔥🦅 🔥6.7 quiet start of the week, for now muahuahua, updates later 🔥7.7 🤘 🔥8.7🤘 🔥9.7 🔥 🔥10.7🤘 🔥11.7 moved to final pot with addition of bio feeding growth and enhancer 🔥12.7 I really messed with the timing,I will start the new week along with the other diaries 🔥15.7 Sunday I update the week, not long. otherwise all right, new irrigated tomorrow 🔥16.7 irrigated with 0.5 of water at the correct ph 🔥17.7 Tomorrow starts a new week and a new diary, yeah. For today everything is fine, the humidity is high because I gave 0.4 of water at the correct ph before taking the photo __________________________________________ ❓ Are you new to the world of the cultivation and don't know where to safely buy your seeds? 😮The Green House Seed Company is the most successful cannabis business in the world.Winner of many international awards (40 High times Cannabis Cups, 17 Highlife Cups, and many more private awards in many countries), it is leader in cannabis genetics. ✅ bit.ly/GreenHouseSeeds420 ______________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "ViparDreamIT" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon US: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE 👀 Watch my ViparSpectra XS1000 unboxing on YouTube, leave a like and write to the channel 🦄 ✅http://bit.ly/UnboxingViparSpectraDreamIT ______________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and enjoy the growth 💚🦄🤟

🌸 Lava Cake – Week 7 (3rd Week Flower) | Blossoms Rising The third week of flower has arrived, and our Lava Cakes are stepping fully into bloom. Both girls are looking beautiful, symmetrical, and strong, with thick white pistils reaching out and leaves still praying to the light. Their similarity in structure makes this run feel almost like growing twins, each reflecting the same genetics, each glowing with energy. ⸻ 🔙 Looking Back – The Road Here From seeds sprouting in soft cups → to vigorous veg under Future of Grow and ThinkGrow LEDs → to the careful transplant and expansion in the 8x8 ecosystem, every stage has been about setting a solid foundation. • Feeding: Aptus core line + Plagron boosters • Training: Gentle guiding, letting them branch freely • Environment: Tuned by the TrolMaster brain, with sensors guiding irrigation and VPD All of this has brought us here: lush plants in early bloom, no signs of stress, and a canopy built for flower stacking. ⸻ 🍽️ Current Recipe – Staying Steady This week, we keep the same feed — consistency is key as the flowers set. Per L Water: • Aptus Regulator – 0.15 ml • Aptus CalMag Boost – 0.25 ml • Aptus Top Booster – 0.5 ml • Plagron Power Buds – 1 ml • Plagron Sugar Royal – 1 ml • Plagron Green Sensation – 1 ml With the Aptus All-in-One Liquid still paused, the soil’s embedded nutrition + pellets are helping balance things out while these bloom boosters do the heavy lifting. ⸻ 🌡️ Room & Rhythm • Temps: ~31–34°C (still awaiting the AC unit for stabilization) • Humidity: ~60%, bringing VPD near 1.9 kPa • Watering: Daily — plants are drinking heavily, irrigated once substrate moisture falls near 19–20% • Monitoring: TrolMaster WCS substrate sensor + Tent-X keep us informed on EC, moisture, and temps directly in-soil Even with warm conditions, the Lava Cakes are thriving, drinking more, praying more, and pushing out flowers with confidence. ⸻ 🌸 Week 3 Flower – What We See • White Hairs: Thick, long, and vibrant, covering the tops like cotton clouds. • Flower Formation: Calyxes stacking, pistils reaching — no signs of hesitation. • Leaf Posture: Still upright, showing photosynthesis and metabolism are strong. • Uniformity: Both plants showing the same pace and morphology, a sign of stable genetics and consistent environment. ⸻ 🔮 Looking Ahead – What to Expect / Not to Expect ✅ Expect: • Rapid stacking in the next 2 weeks — buds will start to swell noticeably. • Aroma development — sweet Lava Cake terpenes may start teasing the air soon. • Nutrient demands rising steadily as flowers form. ❌ Not to expect: • Big trichome coverage just yet — resin production typically comes later. • A slowdown — stretch is nearly over, but flower development is just beginning. ⸻ ✨ Closing Thoughts The Lava Cakes are shining this week. Both are aligned in their growth, both are drinking and feeding with rhythm, and both are showing that the careful setup, from lights to irrigation to sensors, is paying off. Week 3 of flower is a promise — not yet the harvest, but the first real glimpse of what’s coming. Thick pistils today, heavy buds tomorrow. With consistency in feeding, environment, and care, these girls are well on their way to becoming the stars of the room. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚

This beautiful girl has started to grow actively, I'm going to give it a shot soon, she's feeling good🌱

Strong smell, sticky flowrs, what else can you ask for?! Beautiful strain to work with, the aroma it's just what you expect from a amnesia strain, ver strong pungent smell, cannot wait to taste those organic grown buds 👨‍🌾😋💎

👌👍👽🔥🔥🔥🔥🔥 You can honestly smell the purple!!! Lmao 🤣 2 weeks left on a couple of these and bit longer on the rest. Frost all over the first mainlined banana Trichomes nearly there still wanting to be abit cloudier, Started on Advanced Nutrients Overdrive this week then should be flushing next week or 2 Smell is amazing, one smells like skittles, unreal🙌🔥 Not long now

Day 35 End of Week 5 Update: Had a bad week worrying about humidity. My dehumidifier broke so I was stuck until payday and humidity was out of control, night time into the the high 70's and mid 60s during the day. But despite that, thankfully there was no issues that came about like PM or funky mold or anything. New Dehumidifier is in and all is looking good Gorilla Cookies is definitely stretching out more than Strawberry G. The Strawberry Gorilla has more of a bushy tendency. I'm hoping she's just a late stretcher so we'll see 🤞 I started light defoliating and so far so good. I don't take out much and with the little I have trimmed there has been no sign of growth pause or stunting at all, they seem to be going strong so far. Happy Growing y'all!

I slacked on the last few weeks because she wasn’t looking the greatest but I’m getting her back to being healthy, so far there’s a lot of lovely looking budsites that smell gassy as hell, I’m excited to see how she turns out :)

SUMMARY: Switched up to Mid Bloom strength nutes this week. I have also started adding 1 tablespoon of organic blackstrap molasses per every 5L. Though some argue this is purely for use in soil to feed the bacteria there is argument that it also acts as a bloom booster due to its active ingredients. She is fattening up nicely though not many tops and so I need density from these. DAY 51 ------ Sunday 21st February 11:30 I made 5L of early bloom nutes at a pH of 5.8 and 5L of mid bloom nutes at a pH of 5.6, both made with tap water. Sunday 21st February 18:30 I fed the NL 1.2L of early bloom nutes which produced roughly 300ml runoff (25%). DAY 52 ------ Monday 22nd February 11:45 I made 5L of mid bloom nutes with rain water at a pH of 5.9. I am adding half a tablespoon of molasses to every 5L now by adding just enough boiling water to liquify the molasses and then pour it into the feed. Monday 22nd February 18:30 I fed the NL 1.4L of early bloom nutes with molasses which produced roughly 335ml runoff (24%). [22°C/55%] DAY 53 ------ Tuesday 23rd February 18:30 I fed the NL 1.4L of early bloom nutes which produced roughly 400ml runoff (29%). With the dehumidifier set to 50% RH it seems to keep it at around 50% RH though the temps between 25-30°C. If I turn the dehumidifier off the RH climbs to 60-64%. Removing more leaves will lower the humidity and I do pluck the odd one every day that is blocking light (I rotate the plants daily 25° per day to ensure all sides get a fair share of light). [25°C/50%] DAY 54 ------ Wednesday 24th February 18:30 I fed her 1.4L of early bloom nutes with molasses which produced 200ml runoff (10%). The temps have risen to 30°C due to the dehumidifier. It is currently set to 50% RH which keeps the temps around 28-30°C and the RH at around 38-40%. I have increased the setting to 65% to see if that helps lower the temp and increase the RH up to 45-50%. [30°C/40%] DAY 55 ------ Thursday 25th February 11:30 I made 10L of mid bloom nutes with rainwater and molasses (level tablespoon per 5L). 5L at a pH of 5.9 and 5L at a pH of 5.8 Thursday 25th February 18:30 I fed the NL 1.6L of mid bloom nutes which produced roughly 610ml runoff (38%%). [22°C/55%] DAY 56 ------ Friday 26th February 11:30 I made 10L of mid bloom nutes with rainwater and molasses (level tablespoon per 5L). 5L at a pH of 6.0 and 5L at a pH of 5.6. Friday 26th February 18:30 I fed the NL 1.4L of mid bloom nutes which produced roughly 420ml runoff (30%). [22°C/55%] DAY 57 ------ Saturday 27th February 18:30 I fed the NL 1.4L of mid bloom nutes which produced roughly 410ml runoff (29%). [22°C/55%]

🗓️ Week 8 complete – 4th week of flowering A few days late with the update – been a busy week – but Seriotica is doing just fine 🌱 I managed to bring the drain EC down from 2.4 to 1.8. A couple of leaves showed minor signs of overfeeding, but overall she handled it really well 👍 📏 Current height – Seriotica: 78 cm Stretch is definitely over now – holding steady. And the best part: Frost is coming ❄️✨ Seriotica is starting to develop a promising trichome layer already – looking like she’s gearing up for a strong finish!