Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Three large glasses full to the brim with the purest, sour and diesel-smelling sativa monster! What a tough passage this time. A few unpleasant personal events occurred during 3 months of the finest organic farming, some of which were in the battle with my motivation. A time full of happiness and a time full of sadness and compassion. I also learned an incredible amount once again. I’m very grateful. “The outside of a plant is only one half of reality.” Take care & 🐝 positive Alpha_Green
Likes
14
Share
@DE_BW
Follow
The plant developed an excellent structure with well-spaced branches and very good light penetration, resulting in evenly matured buds. The flush clearly paid off, as the aroma intensified significantly toward harvest and the flowers developed a clean, strong terpene profile. Bud density is impressive, with tight, heavy flowers showing great resin coverage and a visually striking finish.
Likes
25
Share
@DrGanj
Follow
COntinued to apply small amounts of pressure with LST but aside from that, letting her do her thing. Had to leave her for a few days and she got dehydrated, after a feed she perked up again but she's now started sucking all the nutes out of her lower growth. She has a lot so I'm hoping it doesn't affect the harvest. Would have preferred this to begin with my flush. For more content on all my grows please check out my Instagram! Link is on my profile!
Likes
42
Share
I'm back with another update. I could'nt hard bend them alot because the stems got thicker, if i would had done that, branches would had snapped. On the other hand the shamans had their stretch(already 2 weeks into flowering) and will not go any bigger, maybe a bit but not that much. (As a reminder, i bend them alot because i don't want them to get higher then my balcony fench) So I only have to bend the critical kushes a little bit for a few weeks until they had their 2 weeks into flowering stretch. Hopefully i will get a nice cantopy again. I gave them a little bit more nutrients(ec 2) because when i checked my run-off, it was still on a lower level, saw some difiencies and yellow leafs. Indicating that they can have more nutrients. Update: Compare this week with last week and see the difference. By just giving them the propher love they need, they will get better! Next update will be the end of this week like always and i can tell you they are starting to look better. Also i have to keep remind myself that this is just a outside fun grow haha and not anything to serious because when i gave them only water today I checked the run-off and all plants had different levels of ph and ec, which for me is normal because i'm used to alot of plant at the same time and never cared about it(cost alot of energy and time), but with just having 4 plants, it is tempting to do something about it like making seperate feed buckets for every plant haha.
Likes
6
Share
@sedygrows
Follow
The scrog was no good idea. Had to remove it today. Problems: unable to switch water properly and can‘t clean the tank during the process. So.. scrog is gone and the LST is back 😂
Likes
97
Share
@JieGrow
Follow
Week 3. Photos from the end of week 2 to the end of week 3. You can see the size difference in the girls they are doing great! Still having Plagron nutrients. Decided to change the light to a 600w HPS 4 days ago. Some of the girls are showing some signs of heat stress but rectified it and they will bounce back in a few weeks. Going to get the scrog net sorted before next week and get them growing into it. Here's hoping lol! Happy growing.
Likes
11
Share
Last week; we’re about to finish! Will update you soon. Keep an eye on the harvest posts.
Likes
50
Share
@Rwein93
Follow
Ciao ragazzi e bentoranti per i nuovi aggiornamenti!!!😉 Purtroppo ragazzi questa settimana non è stata delle migliori per i parametri. In Italia il caldo inizia a farsi sentire e nel box si sono raggiunte temperature di 30°C e l umidità è salita al 70% anche bagnando al minimo loro. Però nel complesso tutto bene, le ragazze al limone crescono imperterrite e la numero 2 adesso misura 35 cm. La numero 1 se non l avessi piegata sarebbe stata almeno 45 cm. Una bomba!💣 Anche la numero 3 sembra che si stia riprendendo bene.👍 Avendo cambiato zona di crescita non avevo calcolato il cambio di ph dell acqua del rubinetto e il fatto che non usi prodotti con un regolatore di ph incorporato mi ha tratto in inganno.🤦‍♂️ Ho misurato il Ph dell acqua dopo averla fertilizzata ed era di 7.7 così ho introdotto 0.25 ml di Ph Down e l ho portato a 6.27. Ora dovrebbe assorbire i Super nutrienti che gli stando alla grandissima!!!💪 Eh niente ragazzi! Speriamo che le temperature si abbassino di un paio di gradi anche per noi perché si muore e sembra solo l inizio. Grazie a tutti per aver guardato e restate collegati per nuovi aggiornamenti.🙏 Buona settima e felice crescita🌱🌱🌱 P.S. Il video riprende 3 talee varie all inizio, le Lemon Tree, le MimOrange e 1 altra talea
Likes
3
Share
Likes
58
Share
Hello growmies, had a good week, weather was okay, Not too hot, 2 days rain ,the girls started preflowerring and Stretching. Every two days, i adjust the lst, most Autos respond well.the critical finally starts growing better, since she Gained size. The special queen #1 Shows her will to survive and pushen the next pair of leaves. One nla x ??? Showed male Ball sacks after just 29 days.i guess it had ruderalis genes, cause this was fast. The Otter nla x ??? Started branching, so she got lst too. The beds for my second run are prepaired, i'll start another diary for that one. So check up next week. So far, so Goodyear.see ya next week.✌️
Likes
225
Share
@yan402
Follow
🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 Hi and welcome to a first @KanOrganics run! This time I’m running Fantasy Feast (6x regular seeds). Gonna veg them under 24hr light with a mix of LST and topping — might let one go wild for fun. Still prepping the tent, need to transplant all my tomatoe and paprika plants to free up some pots, gonna sow tomorrow (14.04.25) 🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) Cleaning old coco coir & prepping pots. Might need to hydrate extra bricks. This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed: Micro 10ml Grow 0ml Bloom 0ml GreenBuzz 10ml Cal-Mag 60ml FPJ 10ml pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) Sow 6x Fantasy Feast ✅ 16.04.25 (GW1) did final tent clean up and all set up now ✅📸📸📸 18.04 25 (GW1) All 6 germinated 🎉👌♥️📸 🙏@resi_max 26.04.25 (VW1) using the new Batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 00.04.25 (?W?) Transplant to...WIP, ✅ 04.05.25 (VW3) Topped all of them to the same size except #4 which probably won’t make it. #5 is showing classic small pot symptoms, all 6 are droopy so left them to dry a bit,I overwatered them apparently, I'll be repoting tomorrow in bigger pots probably 9l, *repoted in 11l pots✅ 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 24.05.25 VW6 increased GreenBuzzBloom to 30ml 01.06.25 VW7 At least 4 are female 🎉🥂 by next week I'll be choosing 2 or 4 to finish off. 05.06.25 VW7 Did a cleanup 📸📸 10.06.25 VW8 kept #1-4, #5 and #6 are going to the balcony with a new diary📸📸 14.06.25 VW8 did a cleanup HST session 📸📸 (VW9) 21.06.25 VW9 Switched lighting to 12 hours. 28.06.25 VW10 Girls a stretching nicely and are eager to show their pistils. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 40ml, fpj 30→60ml 22.07.25 FW3 TriPartMicro 30→20ml , TriPartBloom 60→80ml , GreenBuzzBloom 40→50ml 24.07.25 FW3 Cal-Mag 60→40ml 26.07.25 got thrips but handled them with extra airflow and defoliation. 29.07.25 FW4 GreenBuzzBloom 50→20ml, Home-made FFJ/FPJ (new batch) 60→120ml 04.08.25 FW5 Fantasy Feast #3+4 are showing signs of maturity so I created nutrient schedule #2 just for those two. 05.08.25 FW5 decided to harvest the tops of Fantasy Feast #3+4 for two reasons: no1 I want a "speedy" high, no2 I have thrips in the tent and even though they are under control it doesn't harm to get the tent dryer with more airflow and 2 "half" plants less, 📹 Fantasy Feast #1 wet trimmed: dry trimmed Fantasy Feast #2 wet trimmed: dry trimmed Fantasy Feast #3 wet trimmed:104.3g, dry trimmed: Fantasy Feast #4 wet trimmed:128.7g, dry trimmed : 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 09.08.25 FW5 – Fed 3l of #1 → FF#1+2, – Fed 3l of #2→ FF3+4→ 1.5l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 only for FF #1+2 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50 → 30 → 20ml = 0.67ml/L 🍶 TriPart Grow: 0ml = 0.00ml/L 💧 TriPart Bloom: 0 → 20 → 60 → 80ml = 2.67ml/L 🍶 GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60 → 40 → 50 → 20ml = 0.67ml/L 💧 Cal-Mag: 60 → 40ml = 1.33ml/L 🍶 Home-made FFJ/FPJ (new batch): 10 → 30 → 60 → 120ml = 4.00ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 280ml per 30L 🔬 9.33ml/L 🍶💧🍶💧🍶💧🍶💧🍶 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #2 only for FF #3+4 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50 → 30 → 20ml = 0.67ml/L 🍶T.A FinalPartRipen 20ml = 0.67ml/L 💧 TriPart Bloom: 0 → 20 → 60 → 80→ 0ml = 0.00ml/L 🍶 GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60 → 40 → 50 → 20ml = 0.67ml/L 💧 Cal-Mag: 60 → 40ml = 1.33ml/L 🍶 Home-made FFJ/FPJ (new batch): 10 → 30 → 60 → 120→ 200→ 100ml = 3.33ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 200ml per 30L 🔬 6.67ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️Tools & equipment✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast(@resi_max Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown WIP Flavor: Unknown WIP Flowering: Estimated 8–10 weeks Resistance: Unknown — Testing phase Notes: Expect weird phenos, candy terps, possible outliers
Likes
3
Share
Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.
Likes
18
Share
Likes
9
Share
@Rufytaro
Follow
I think the plant goes very well... it’s my first time... It is arrived the exact week to use PK13/14, what do you think?
Likes
15
Share
@AllieO
Follow
2/2: not much to report. Slow going, but going 2/5 NL: Still have a few weeks to go, but buds are fattening up. Watered with pH balance water as she was given nutrients on last watering. I didn't have high hopes for this plant. Still unsure of the density of the buds.
Likes
67
Share
I had a busy week. I updated my 4" exhaust fan to a Cloudline 6" booster exhaust fan and a bigger carbon filter. I also added another mini-fan that can oscillate and I had to add a heater. Why you ask? Because I got a CO2 tank from a friend and it is recommended to have temps in between 85-95 degrees. Granted I could have used it three weeks ago but better late than never. I have a nice CO2 monitor inside the chamber and I use the internal video camera to watch the readings. I have also added some HydroGuard to help the roots. They are slightly brown and another grower recommended it. Daphni continues to grow well and has maintained her dark green color. She has also started to make pistils and they are starting to form into buds just three days after first pistil sighting. I can smell her now too. latest readings are Air Temp = 79F, Humidity = 42%, PPM = 1810, pH = 5.9. Concerning my roots, I put a black trash bag over the top of the reservoir to keep as much light out as possible. The reservoir is tan and white and I think light was getting thru.