What a damn Beatiful plant they always fade so nicely like fall color she’s super fat tricomes everywhere perfect little plant I’d say a little over an oz dry and it was super fast it didn’t waist any time stay tuned for the harvest results

July 9: added Power Bloom and a handful of malted barley as a top dressing.

😁🍀👨‍🌾🏻👍✌️💚

The pics and videos are from day 37 of flower. All 3 of these are starting to beef up a little bit, they have perfect bud structures. I'm picking up a creamy kinda vanilla smell on them each having slight variations but what do I know? I really want to grow all 3 phenos again sincenmy clone runs always seem to be just a little bit better. I said this on my last post but for anyone droppin questions in my DMs just comment on a journal I dont go thru the dms its alot of the same questions over and over. That way anyone can see the questions and responses and I'll try to do a better job at responding to comments as well. I always have so many diaries going at once I rarely stop and read them all until the very end when things slow down. Hope everyone had a happy halloween3👊

Nog niet veel verandering maar ik weet dat het goed komt. Geduld is een schone zaak ...😏😏

шишка с новой причёской! появился хороший запах,и так как системный блок дует на шишку,а завехрения воздуха направлены на монитор-запах просто потресающий,обожаю как пахнет растишка)

Topped Gelato #1 on day 30. Upped to 2ml/1ml FP/PT on the last water, will be repotting to final 5 gal pots over the next weekend.

GIVE THIS GROW A THUMBS UP 👍 WEEK #2 DAY 9: She was stunted day 6 & is recovering from that currently . She is in a 5x5 with 3 autos between 35-42 days old . The plan is to veg this single Cereal Milk out to fill this entire 5x5 once my Autos are harvested . This is my first run with this cultivar & breeder however it was an easy choice considering I adore the taste , smell, & smoke of the strain! Week 1 issues: The tents VPD was out of whack . Due to the VPD being out of proportion slowed/stunted growth occurred equally across all 4 plants in the tent . Plants showed deficiencies of CalMag and interveinal yellowing , necrosis leaf spots , reddening leaf petioles & leaf stems slowly progressing in the worst affected plants to red leaf veins & lastly droplets of condensation on the leaves (plants were sweating) Anyways after I fixed the VPD issues , I added a makeshift dome for humidity retention of the Cereal Milk & 3 days later which is today she has added 2 new nodes almost catching up to where she would be with normal healthy unstunted growth at day #9. She was transplanted from her starter pot last night into a 2 gallon with plenty of dry amendments mixed in for a 6-8 week veg. I’m debating on scrogging this plant or LST & Supercropping the SHIT out of this plant . I’ve never scrogged before and am not welcoming any new learning curves at the moment which is my main reason not to even though I think it may be the biggest help to filling this tent & “supporting” the enormous load of bud sites I am planning to grow . I worry about to inconvenience of defoliating & training branches down without being able to get around the outside of my tent given its location in a corner . If I had anticipated wanting to grow a single 2lb + plant when determining my grow location I would’ve placed it more ” openly “. If I can think up a work around to canopy maintenance so that I can keep it clean & by the books I’ll quit complaining & try it . Otherwise she’ll be LST’d & Supercropped OR topped and mainlined . Day 14 END OF WEEK #2 I’ve added remote temperature & humidity monitoring/controller. Now I can monitor the dips & swings while making adjustments to better dial things in . (Just trying it on for size here , for full disclosure I am not in love with it & if I can not modify what it is that is bothering my existence I WILL be returning this unit AND purchasing another brand with the capabilities I am looking for the connectivity for this specific unit I am trying was a BIG deciding factor for me but all in all is not enough to make me settle on this one if I can potentially have it all. . Odds are highly leaning towards returning this unit .) Finally raised the pot to level with the older girls in flower currently . I was wrong when I reported in setup that she was “30 inches “ from the light . She in fact was 35 inches‼️away so I raised her to be 26 inches from the light by placing a 1 gallon bucket beneath her . I WILL NOT LET THE MID-END OF FLOWER & DRYING to cause my run to get derailed

Vamos familia, actualizamos la septimsemana de floración de esta Amaretto Tarmac de Seedstockers. Empezamos abonando ya con varios productos de la gama Agrobeta para la floración. Temperatura y humedad dentro de los rangos correctos, 12 horas luz, 12 oscuridad. Una lástima que de todas solo aguanto una, y en concreto tiene un color espectacular aún así seguiremos con el diario hasta el final. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

What you guys thinking of these going start feeding them bio grow what else could I get

Going well, they are all drinking consistent, feeding them a pretty high dose at the moment, around 2.2ec, signs of burning and spotting int he leaves, think that might be few issues with A

She seems to be growing kinda slow.. I'm sure it's from all the stress I put on her. She should pick back up this week. Day 30 and she has some calyxes poppin up everywhere.. I think day 31 I found her first pistil.. Ill know for sure day 32. She's healthy and the slow growth is picking up a little. I need to put in some horizontal spikes to tie the branches down a little more.. Just enough to give the colas room to grow at this point. She's not gonna be a massive yield (obviously) but not gonna be a complete waste of time. Once I harvest my current main plant I will try it again in a 5 gallon pot. Yup! Pistils at day 32.. Just small and hard to take a pic of. Preflower begins!!! This week temps have been getting up to 86F.. I put in a 2nd inline fan with carbon filter and 2 more fans for the top of canopy to get some air movement. The air is NOT cooling down enough so Im just gonna have to go without the filter. ... Later that day... Even without the filter, the tent still gets up to 84F.. WTF?! It was staying below 80 with just a little clip-on fan and small inline fan pulling air out and nothing pushing air in.. Im using the smaller inline to pull air in and the new inline pulling air out.. Now it gets warmer.. I dont get it.. Gonna have to go back to my old setup I guess.. ... Even later that day... Put up the old ventalation.. But with extra fan still pulling in air.. Smell may be strong throughout my room when lights go out.. But oh well.. I love the smell. Tied down branches a little more.. They should be far enough to do what she needs to do.. Pistils are there.. Just very very small at this point.. But they are there on a couple branches lookin good and happy! 😊 no more leaf removing.. This is only my 3rd auto... Second auto is only halfway through flower now.. Sooo, I'm still learning!!!

Esta ha sido la última semana para algunas, en estos días las cosecharé. Esta semana ha bajado la temperatura, teniéndola muy baja con las luces apagadas.

Bonjour les amis. Cette semaine le stretch a bien démarré et est bien sensible 😻. J'espère qu'il sera limité, mon placard est petit. Aucune odeur pour l'instant. La plus petite des 3 plantes fait 15 cm de haut. Les 2 autres font 29 cm et développent plusieurs têtes. Pour l'instant tout va bien. À bientôt 👋

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Well Everyone!! Here we are! 😁 Nearly at the end of the Eternity Grow Cup journey! 🙌🔥👽🙌🔥 Just want to first say a massive Thankyou to Zamnesia & Plagron for letting me compete in this contest. Would not be here without you! absolute legends😎 I had an absolute blast making the videos every week and showcasing the Grow Huge Thankyouuu to everyone who liked, followed and commented on the diary! I have been hooked for weeks on this! and its thanks to all you guys! haha Much love!! 💚💚 I Appreciate it soo much. 💚💚💚 I have Harvested 2 of the Runtz first which were darked out for 3 days in a 3x3. We have 3 more in flower for another week or 2 as they are little behind schedule! There are 2 plants which I will be flushing next week as they have really packed out now. We got 1 straggler but looks like she's fattening up good! and will follow suit very soon! 😎 🌳Plant 1 Harvested and Drying now The size of this momma Runtz is mad! After loosing one of the main stems in early flower, she powered through and made 2 massive fat colas! Hardly ran into any problems with this plant other than loosing a main stem which turned out to be glorious in the end! 💥 She is now drying in the 3x3. I'm aiming for 10 days drying. Smell is absolutely unreal! I would normally do longer but as I have took most of the main fan leaves off I think it will be a bit quicker this harvest. 🌳Plant 2 Harvested and Drying now - Another whopper! super sticky colas all over it! I decided to leave a few more fan leaves on this one for now but may take more this week aiming for 10 days again! couldn't' be happier with the results, Hardly ran into any nutrient problems throughout. We had a few pale leaves early flower due to overwatering but she soon recovered and powered through! Smells like victory! Could not be happier with the Results so far! 2 down 3 to go! cant wait to get a weigh on them fat colas! I will take some more snaps over the next few weeks and show the dried and final trimmed bud of the 2 harvested and hopefully get them uploaded before the contest time expires. First time using the Green Sensation from Plagron! I will 100% be investing in some more or maybe win some lmao! I can see a dramatic difference in Weight and health of the Autos grown! Green stems and healthy leaves , PHAT BUDS!!! 😜😜😜 3 more Plants to go not long now!!!! I Will add another flowering week in next 2 days and show the other 3 still in action! Going to Update this harvest page in the next 2 weeks with dry weigh results and Smoke review to follow!! Update 25/05/25 3 remaining Plants 🌳🌳🌳 have now been harvested and curing in the grove bags. there are 2 plants that have a very minty fresh smell, smells well good when u open the bags! hits your nostrils hard! The other is very lemony earthy fresh stuff , some big fat nuggies and popcorns on all 3 . smells so good! FINAL WEIGH 10.89 Ounce from 5 plants! - Jackpot! 🥇🥇🥇🥇🥇 💥💥💥💥💥 Well that's it! its been emotional! All 5 harvested 😎 this is the ennnnnnnd! my only friennddd! Good luck to everyone in the contest! 👍 Peace Out! Gram_Solo 👽

~ DUTCH PASSION / SUPER SATIVA SEED CLUB FAST FLOWER 'TESTER' A and 'TESTER' B ~ Well cannafam, here we go again on another growing adventure together! This diary will be special to me for two reasons, one because I have the opportunity to cultivate some new and exciting strains from two of the TOP breeders in the industry! The second reason this will be special to me is that I will be growing these two strains in a brand new greenhouse that I put up! I'm super stoked to see how these two ladies turn out in this new setup. On to the strains: 'Tester' Strain A info: Hybrid (I/S) | 6-7 weeks flowering | Fruity, Sweet, Candy 'Tester' Strain B info: Indica-Dominant (90%) | 7 weeks flowering | Fruity, Peppery, Sweet I hope that you enjoy this run as much as I will... It's going to be fun and interesting for sure! ~GROW WHAT YOU LOVE, LOVE WHAT YOU GROW!~ ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: These beauties will be growing in a brand spanking new 10x14' greenhouse that I have equipped with automatic window openers, a complement of Hurricane fans and a de-humidifier/heater to help keep the environment as dialed in as possible. I started both tester in glasses of tap water, where they soaked for 24hrs. After soaking, they were placed directly into whole eggshells with just their tops removed to make a natural seed starting pot that I filled with a 70/30 blend of Coco/Perlite which was pre-moistened with well water ph'd to 6.2, then placed under a 50w full spectrum LED on a 24hr light schedule. Once, they both have their second set of leaves emerged, I plan on starting to put them in the greenhouse for 2-3 hour a day for a few days to help them acclimate and 'harden off' in the greenhouse. I'll be starting both off in 1qt pots, then transplanting them into to gradually larger pots until they're around 6 weeks old, then they will go into their final pots which are 25g fabric pots. I mix my initial medium using 3 tbsp/g of Gaia Green Organics 4-4-4 along with 1 tbsp/g of Gaia Green Organics Glacial Rock Dust for the trace minerals it provides, 1 tbsp/g of Down To Earth Kelp Meal, 1 tbsp/g of Trichoderma/Mycorrhizae, and 1 cup/g of Wiggle Worm Castings. I hand mix my amendments to ensure an even distribution throughout the medium. I'll be watering with well water ph'd to 6.2-6.8 and providing bi-weekly compost tea's throughout the run. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 6/1- Week Seven of vegetation for the two 'Testers' from Dutch Passion/SSSC and they are both taking off with vigorous growth! I have started to include TPS Plant Foods Trichoderma/Mycorrhizae/Beneficial Bacteria to my top dresses to give the plants some extra resilience to the heat that will be coming soon. I've had great success using this combination which really helps with heat stress and can also help to prevent other issues, such as disease and fungus attacks! 6/3- I have upped my waterings to daily, and am now giving the 'Testers' 2g of water a day, along with weekly Compost Teas. 6/5- I topped both plants side branches today, as well as removing some lower small shoots and lower shade leaves to help direct energy to the upper sections where it will needed most. 6/7- Well fam, there goes Week Seven of veg, the weather is getting hotter by the day and these two beautiful girl continue to explode with growth! Thank you for visiting my diary, I hope you will follow along and hope you enjoy what I do! Stay Blessed!😎💚

It's starting to smell like blueberrys and a ripe banana. As some sort of pie. I thought people talking about the smell were bullshitting but till this point its actually true. I hope buds smell like this later on💀

3 autoflowers which is Outlaw Amnesia, Purple Punch, and Strawberry cough are well undergoing veg stage. Since these 3 plant genetics breeded are a mix of 2-3 different strains. The grow results from this seed breeders are amazing no complaints. I am really looking forward growing single strain very soon from international seedbanks asap once i finish experimenting all of my custom breeder strains. I am having a crazy overthinking with 2 of my AK47 since they are seeds generated from a hermie AK47 autoflower. The issue is more of a thought process whether the plant will flower since these 2 of them are under 1 tent with 3 Autoflowers😂, i hope they will follow the autoflower traits and not photoperiod. If they are not flowering, i was informed to flip the light to 12-12, If this situation happens, the only possible outcome i can think of is to defoliate/shwazz them and then flip them sf2000 to 12-12 right only i harvested 3 of the Autoflowers. Officially planted these babies on Nov 9, i will log into GD diaries every Sunday. Officially added 0.5ml of BigBud per litre, a very minute ammount just to top up some P and K since 3 plants are entering preflowering soon.

The buds have developed very well this week. I had to run the dehumidifier for a few days because it was too humid for me. I had had experiences with mold and therefore preferred to be more careful I am very satisfied... The gorillas already look very sticky and shine silver, like a silverback gorilla. The Honey Cream looks like I remember it...very fluffy and hairy calyxs --------------------------------------------------------------------------------------------------- Controller AC Infinity Pro - connector for the external light control, RJ-12 - 2 plugs with which I can control dehumidifier and humidifier. - 2 fans run 24/7, 1 Oscillating from spider farmer Light - 12/12 h PPFD - 900-1000 µmol VPD - 1,3 - 1,6 week average RH: 54,8 % Temp: 24,2 ° VPD: 1,38 kPa