Likes
Comments
Share
Grow Journal Week 3: Bloom Phase Progress 🌼 Hello dear growers and growerettes, I’m thrilled to share the third week of the bloom phase in our grow journal! Here are all the details for Week 3: Weekly Progress We are at the end of Bloom Week 3, and the plants are thriving! Even our previously problematic plant has made a full recovery. My favorite plant, the one on the left, has claimed an entire half of the tent for itself. The stretch phase has now concluded, and I am very pleased with the results. Watering and Control Systems The watering system is operating smoothly, even with the increased water consumption of the ladies. The Blumat and TrolMaster systems are working without any issues. Challenges In Week 2, I performed a heavy defoliation since I had some time that day. Although it was a bit early, the ladies have recovered well. Due to limited time over the past two weeks, and this likely continuing until the end of December, I've been doing my best to keep the journal as current as possible. Goals and Expectations In the next two weeks, I expect my buds to start swelling, and I am very excited about this development. Thank you for following along, and stay tuned for more updates! 🌿✨
Likes
8
Share
3/3: Did some light defo and raised my lights a couple inches...seeing a little bit of burn. I shot a little video of this plant just to have one, but it flickers for some reason..prolly the sub canopy light... 3/4: Spent all day jacking with the closet and swapping out the new a/c.. 3/5: I changed out the reservoir today. I finally found a seller of BioTabs BoomBoom Spray (in Great Britain) that sells to and ships to the US for not-such-ridiculous-prices!! I ordered a 250ml bottle so I won't run out for a while! I'm almost out of Bembe and I've heard good things about Humbolt's Secret Sweet & Sticky, so I ordered a quart to give a try. 3/6: I added a backdrop and photography lighting equipment to my cart at amazon...will pull the trigger on it soon! 3/8: She's looking good and stinking up the whole room now!
Likes
22
Share
@Spliffi
Follow
Week 13👍🤙👍🌱 And it's Chop time. I made some bubble hash from the wet trim. First time and did not expect anything yet is was a success. Got a few drops. Will do one more bubble hash cycle with the dry trip. Overall the contest was nice. Still waiting on all the details. Jon Dabs Check them out here: https://jondabs.com @jondabs Instagram The Sponsors Check them out here: Dutch Passion https://dutch-passion.com/en/ Hydroponic.co.za https://hydroponic.co.za/hydroponic/harvesting-and-growing-accessories/ Bud Juice https://www.gohydro.co.za The Best Grow https://thebestgrow.co.za Dynomyco https://www.dynomyco.com Nuclear Roots https://www.nuclearroots.co.za Photronic https://shop.photronic.net Special Thanks to Hydroponic.co.za. I buy all my products from them. Best service. Daily updates coming...
Likes
9
Share
Got some yellowing going on with a few of the fan leaves. Also continuing with the LST.
Likes
Comments
Share
Netz entfernt Entlaubt Pflanze unter dem Netz neu positioniert.
Processing
Likes
12
Share
Harvest report in progress. Please check back soon for update..
Likes
25
Share
@Mathew
Follow
Switched to flushing on monday morning, watered 1.5 gallons of distilled water only through the soil each morning. For those who do not believe in flushing your plants, remember in elementary school when you added dye to the water of flowers and visibly saw them change colors? Same idea. I have been checking the maturity of the resin heads closely under 60x magnifying. Turned off the lights for good on her last night (Wednesday), planning to leave her in the dark a few days (72ish hours) and then planning to harvest a few hours before the lights would have turned on. For my first indoor grow, my own custom living soil build, massive amounts of cover crops, only aact (actively aerated compost tea) with natural farming inputs, and some ferments to boot I think this is one amazing plant. Looking forward to drying her for a few weeks the splitting her in to multiple jars to test 30, 60, and 90 day curing with a 4th jar to smoke from when I get impatient.
Likes
9
Share
Plants loved their new home from last week.....the crown of one plant got broken off while I was deal with something else....so instead of trying to fix it or throw it out I decided to put it into a pot.....to my surprise 5 mins after doing that I realize it started to straighten up from the training of the tree it broke from....thinking it would be like that for a while until it pushes root.....woke up to find it fully straight and buds got fatter......hope it is a success would be first clone...#happy growing
Processing
Likes
13
Share
@neuraxis
Follow
Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.
Likes
1
Share
Beginning of week.. Forgot to update end of last week.. but here she is!... So this week she should still be stretching and (hopefully) the slowdown should be the following week.. she is doing good.. water, feed, water, feed, etc. But not daily.. I do water, feed, skip, water, feed, skip, etc. I do that so the day after feeding 1 gal., she gets a day to dry out. Then I water 1.25 gal. to help rinse salts and build-up.. then feed the next day again.. so she isnt left too long without a feeding.. but I'm sure things would be fine if I watered/fed daily.. just a bit of a hassle for me now.. collecting rainwater and cutting it with 25% crappy tap water works great.. but a hassle lol.. she is happy and so am I! You can see in the pics that the stiples are turning purple are red.. just the stiples.. not the leaves.. not the pistils.. also noticed that on my last run with ETHOS Cookies and Mandarin Cookies.. pretty.. hopefully she will be very colorful! Almost mid week.. Wow.. literally no trichomes yesterday but this morning they are damn near on every bud site! Wow.. rubbing trichomes and sniffing gives me such joy and a hint of what to expect at harvest.. very sweet so far.. yessss! So excited! Mid week... Stretching quite a bit but she shouldn't get too much out of control. Running the WAKYME J-2000 at roughly 60% power and 12" - 14" above the canopy. She is receiving 1000 micromols at the center and about 550/600 micromols around the edges and corners are getting about 500 - 550 micromols.. entire plant is getting GREAT PAR! She is stretching so much that every 2 - 3 days, I need raise the light quite a bit.. I'd say she is stretching about 4 - 6 inches every 2 - 3 days. Fucking incredible, in my opinion. rubbing the trichomes.. aw man.. rubbing those GORGEOUS trichomes and getting a wiff of what she should be producing in the very near future is just mind blowing how complex and strong ETHOS terpenes are (at least the 3 that I have grown out). I couldn't be any happier with this strain.. or any ETHOS strain! ETHOS Genetics is easily in the top 5 of cannabis breeders, if not number 1.. I've got the OG Kush Autoflower waiting to be germinated soon.. can't wait to see what that girl can do, as well. It will be my first autoflower from ETHOS.. pics of her look EPIC AS FUCK!.. Anyways.. I'm just abusing my keyboard right now thanks to some Mandarin Cookies from ETHOS genetics.. super complex terpenes as well.. Mid week.. She got herself a good feeding today. The runoff pH has been coming out about .3 - .4 higher than going in.. the watering before today I went ahead and watered at 5.8.. runoff came out at 6.3.. perfecto! Today, went in at 6.2 and runoff came out 6.2... dos perfectos! Aye! So far, this girl is not disappointing at all! So much trochomes production just in the last 24 - 48 hours! Smells so freaking amazing!.. should be pretty fruity! I can't wait!!! End of week.. I've been kinda tweaking the nutes a bit.. I can see all the nute burn (trying to avoid overfeeding) but still trying to transition from grow to bloom.. actually, I thinkI can go to full on bloom now. She isnt stretching as much anymore. She had slowed quite a bit.. but perfectly lol.. so yeah.. gonna stop feeding grow nutes at this point.. and also cut out the MYCO+ because its only used in veg and transition. I'm going to add in some FloraNectar to make up for the molasses that was in the MYCO+.. no bloom boosters.. at least right now. Runoff is coming out perfectly.. sometimes it may drift to 6.5 but it has never gone out of range (6.5+).. if it stays at 6.5 for too long I end up watering/feeding at 5.8 at couple times and its back down to 6.1 or 6.2.. other than that.. no issues! On to the next week!...
Likes
6
Share
23.10.2025 I am so happy about their actual appereance. They are just beautiful, healthy and looking forward to sn intense stretch. There is still the surprise to be revealed in some time. Is it a girl? Is it a boy? 😅 Oh, dear, I'm not sure if I will go on with this insane idea of unwilling breeding because of having a male. Fingers crossed that both are females. Today they flip to flower 🌸
Likes
15
Share
Gracias al equipo de Seedsman y XpertNutrients sin ellos esto no sería posible. 💐🍁 Alaskan Do-Si-Dos: Alaskan Do-Si-Dos ha sido desarrollada por expertos como una versión mejorada de la siempre popular variedad Alaskan Purple de Seedsman. La introducción de la genética Do-Si-Dos en la Alaskan Purple ha creado un híbrido índica/sativa que aumenta la potencia y el rendimiento al mismo tiempo que mejora el perfil de sabor y sigue siendo versátil en lo que respecta al cultivo en exterior. La Alaskan Do-Si-Dos está destinada principalmente al cultivo al aire libre y en invernaderos. Las plantas crecen altas y prosperan en climas fríos, templados, cálidos y secos, al mismo tiempo que se desempeñan bien en altitud. Esto no impide que se cultive en interior, pero estas plantas grandes necesitarán mucho espacio. Las plantas muestran una resistencia moderada al moho pero, si se cultivan en interiores, hay que tener en cuenta que son RUIDOSAS, por lo que se beneficiará del uso de filtros de aire de carbón. En exterior, en latitudes septentrionales, la cosecha está prevista para finales de septiembre, mientras que en interior las plantas tardarán entre 8 y 10 semanas en completar la floración. Los rendimientos en exterior son muy altos y pueden superar fácilmente los 750gr/planta, mientras que en interior los rendimientos son elevados, hasta 600gr/m2. Los cogollos maduros tienen una densidad media y mantienen un color verde medio. 🌻🚀 Consigue aqui tus semillas: https://www.seedsman.com/eu-es/alaskan-do-si-dos-feminised-seeds-sman-aldsd-fem 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 2: Fantástica semana, estan creciendo de una forma espectacular gracias a la ayuda de @marshydro, @xpertnutrients y @trolmaster. Se puede apreciar un tercer nudo aunque he tenido que recortar una hoja porque se estaba secando, creo que he aplicado la infusión de cola de caballo demasiado concentrado y esto ha afectado a algunas plantas. Esta semana espero trasplantar a la maceta definitiva. Potencia de la lámpara: 50%
Likes
75
Share
@Sider79
Follow
Really impressed at this point. Treating them all same the whole time due to harvest times , it will be interesting to see how they preform.
Likes
29
Share
@Grileon
Follow
Did another topping today. Hope there will be 8 strong main branches. Also raised temperature and humidity a little and plant looks much better now. Roots still healthy and white. UPDATE: Did defoliation for big fan leaves and LST for all 8 branches.
Likes
8
Share
@drbill
Follow
I'm shocked and impressed at how much abuse from my mistakes (high PH, low PH, no nutrients, to nutrient burn to light burn) and it turns out so good! I did a rough trim on them and hung the branches on hangers. I weighed each hanger so I can update it later Epsilon one 66 g hanger one Hanger to 61 g Hanger 3 40 g Hanger for 47 g Hanger 5 72 g Epsilon two my Hanger one 49 g Hanger to 33 g Hangar 375g Hanger for 71 g Hanger 540 g Hanger six 93 g Epsilon 3 Hanger one 95 g Hangar 295 837 Hangar to 59 g Hanger for 75 g Hanger five 52 g 5grams loose bud Wet harvest 1028g 36.26oz 2.26lb