Struggled keeping humidity up I think it’s my filter but I don’t know. Tried most tricks in the book and had to invest in a humidifier ( not the best either). I know it’s frowned upon to use foliage spray sometimes as it can cause mould/light burn but my humidity levels are some what in the middle

14/05 elle démarre bien, peut-être un peu basse de la feuille.😁

This week went well, she stopped stretching on Day 47 and I transitioned to flowering nutes. I finally decided to set up another reservoir, so I will now have one for veg and flower nutrients, with a valve that I can easily switch between either reservoir for either plant. Not much left to do for this one, just sit back and hope that the buds get nice and fat. She is still loving this new Mars Hydro EC 3000, and excited to see what happens over the next few weeks. Thanks for stopping by, have a great weekend, and Blaze On!

Consechada! Es una planta muy fácil pienso, es la primera vez. No lo sé cuanto gramos pueden ser.. espero 5g secos gramos por planta? No tiengo un idea, realmente.. claro por 65W LED no puedo preguntar más... lo hoy cultivada como regalo por mi amigas, sólidamente se regalan rosas a una mujer, yo le regalo estas plantas, esperamos que le van a gustar también... no pienso que la voy a fumar... no lo sé.. Cuanto gramos secos pueden ser más o meno piensas?

two different phenos.

La 4 semana de crecimiento las niñas están estupendas con un montón de baras y ramas para tofos lados y súper Robustas ya dentro de 1 semana y media entramos en floración señores

Ehi ragazzi come va tutto bene? Questa settimana la crescita è stata davvero esplosiva!!! La genetica XL della sweet seeds nonostante io l abbia toppata al 4 internodo è già 70 cm!!! Spero nn cresca di più xké ho paura poi di bruciare le foglie e i fiori come mi è già successo anche con l ultimo ciclo, apparte questo sta evolvendo tutto bene ,grandi foglie a ventaglio si moltiplicano e le cime iniziano già a intravedere il colore ,per fortuna,viola di questo splendido fenotipo!! 😽😋💪🍀 Che piacere vederla crescere e che la mia piccola grow box con pochi accorgimenti si è riempita di verde ! Forse grazie alla magia che fa la luce FC E3000 che diffonde la luce dappertutto uniformemente e si vede che le piante ne stanno beneficiando come non ho mai visto in vita mia ! Grazie a Mars Hydro e Sweet seeds che stanno rendendo possibile questo progetto!! Buon 420 a tutti!! 💪😼👍🧙‍♂️🌿✨🌲💨😂

Just water

Things have been going well as I continued to train the stretching girls to the side of the pots, bending and adding ties where needed. Pheno 1 started showing signs of over watering showing droopy leaves as well as what I think is either nitrogen, magnesium or iron deficiency. I'm leaning towards a iron deficiency since the yellowing is on the newest growth at the top. I think this was caused from giving her too much top amendments in her last feed causing a pH imbalance. What I would usually do is just give her a little flush if this is the case but instead I decided to repot her and the other Pheno into their last 19 litre/4 gallong pots as both were drinking pretty quick and I wanted to avoid over watering again. The rootballs looked beautiful when I transplanted them so I was pretty happy with their progress! This round I've ditched the coco as I had way too many issues with it in the past, including knats and PH issues. In this round I've gone with Biobizz light soil which I added some fish blood and bone, earthworm castings, bat guano and then watered with water and liquid seaweed. I love organic growing :). I do intend on using Coco again but I'll need to do some research on some trusted brands. If anyone has any suggestions please let me know! Pheno 2 is showing signs of recovery but I'd love the input from others about what the deficiency could be? I got my new bubblebags today which is making me want to flip to flower so I can get to harvesting and making some bubble but I'm going to be super patient this round. I want these girls to fill up as much of my 4 x4 tent space as possible. Until next week! ✌️

El dia 26/03/24 realice el corte de la laughing budda. En las próximas semanas subiré cuál fue su rendimiento. La planta estaba bastante resinosa y con notas cítricas bastantes notables, al punto de querer masticar los cocos antes de fumarlos😅😅.

Plants had a bit of a ph issue with all the renovations on the veg set up the ph stick ran out of battery and couldn't keep the ph in check. now that is sorted though and we are running fine again. The plants are in the flowering room as the last set of plants have been harvested already. Veg room is almost built so the diaries will be up to date weekly and not this on and off posts, sorry about all that. The photos here are before and after training the plants after they had been topped a few weeks ago

Lst week , tying down any of the larger branches, & defoliating. I added ac infinity self-watering bases connected to 2 reservoirs from autopots.

Welcome to week 7 growmies! She’s doing great in her second week of flowering! She is still stretching and got a bigger defoliation at the end of week 6. For the start she’s getting only ph regulated water from top and some nutrients from bottom. There a little signs on the leaf tip why I skip nutrients for one watering cycle. On mid of week 7 she’s still stretching and first orange pistils shown up. On weekend she’s getting another defloration and another round of nutrients. We are finishing week 7 shortly! She was defoliated once again to ensure more light density in lower conopy. She’s doing still great and she’s not showing any signs of stress or leak of nutrients. It seems that she’s also stopped stretching. Looking forward to the next weeks!

The beautiful girl has started growing right now. I haven't fertilized her yet. I've done some topping and removed the small leaves. She's feeling great. 💚🌱

Veg Week 5 Day 35 to 41 - 3/25 to 3/31 This week is primarily test training recovery. Seeing each recent topping was at the 3 node point I topped again. Follow up of the cola breaks was nice for all but 1, The worst break (the one with tape over it) actually recovered very well, I see no future issues from that branch other than monitor for weight tears. The next worse break on the other plant wasnt so fortunate. While it started out okay, it also kept ripping under its own weight as it grew topping wasnt only beneficial, it was the only thing that allowed this branch to survive past the day (lesson here is to make sure all breaks are back supported early while they recover at least) I think this branch may need to be supported for the entire grow, and the amount of recovery time is possibly past the point of which I would want to see in a normal grow since it may not produce nearly as well as the other colas. The lighter break on each plant look to have taken advantage of the damage and produces giant knuckles of cured hardwood at the breaks. This is exactly the kind of recovery I want to see since all future water ways will pass these points and the branch will still be strong enough to support future weight of giant flowers. Feed this week was again an auto pot reservoir feed at 300ppm total before add-ins. I used 300ppm Veg concentrate mix (recipe week 2) and NO Bloom concentrate mix (just showing the recipe in week 5- I am adding it in week 6). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) and ph balance this week was for 6.0 Next week I plan to top cut the branches again and change out the feeds with 350ppm at 6.0ph

The last week of vegetative state. Some of those are pretty dense, they look like salad. Maybe adding a bit of blue to this 80 CRI LED is a good idea to get a bit more elongation. Work a lot on LST tonight. I'm trying to make some clone with a technique I've seen long time ago. I put the cube directly on the plant. I remove the skin surface of the branch before putting the rockwool cube around . All cube are wrap in plastic to avoid excessive drying. No hormones. I will wait one week before cutting those clone out of the plant( thats my dead line before flowering). They all receive 200ml of PH 6.5 water this morninig and 200 more this afternoon. Next watering in the morning tomorrow, Working on ESP32 wifi based co2 meter for controling co2 level in the next grow. =============== 2020-05-26 =============== Everybody receive 300ml of ajusted 6.5 water. Adjusting LST and adding some defoliation. Watering clone/cube with 5.5 ajusted water with blunt top a seringue. ========= 2020-05-27 ========= Trying to water 3X day the clone/cube with 5.5 ajusted water with blunt top a seringue Everybody have received 125ml in the morning. Worked on the low cost wifi Surge protector 6 space smartbar. 15AMP@120v https://mygeeni.com/products/geeni-gn-sw003-199-surge-smart-protector-white/ Found a way to get rig of the cheap stock firmware. Flash it with a alternative firmware(tasmota) using wifi/without any opening/soldering. Those are pettry nice , timer capable, you can remotly control and monitor them After setup you can acces the bar using the small web interface or via a MQTT server and home automation software. I've posted a image of the result for those 2 examples. So im thinking to turn this into a tutotial to help grower to acces flexible technology and software at resonable price. You can comment to signify your interest in this! =================== 05-29 ================== Everybody back on water until monday/switch to flowering. Added some tutor for the next stage. Moved the cam for top view I cleanup/defoliate the bottom of each plant.

Weather is getting hotter and hotter every day now and will be for another couple of months, so it's going to be a hot harvest... Temps getting close to 90°F now every day for a couple of hours... Plants seem pretty happy so far, taking the heat, hopefully they won't stress too much over that... Flowers getting FAT, QUICK. Need to get some sticks for support for the taller plant. Im feeding almost nothing this week, mostly just plain water. They did get a worm castings top dressing a week ago, along with some diatomaceous earth, and that should be kicking in about this week... My FoxFarm Trio is almost empty , so i will make it last until the end. Pretty happy with this grow, my best so far, and the easiest too... I do have better gear now though... Specially the dehumidifier.... Now im going into the weeks that always kill me with mold. The difference is, now i have a proper dehumidifier and mold should get under control, so i can really explore the 8th and 9th week in flower... Let's hope it works out well Plants smell and look awesome.