Likes
Comments
Share
Againβ€” my fault on this oneβ€” coo po ups and wold have been better if I would have ran individual dwc per autoβ€” screwed them up in the veg/flower transition- regardless the terps are insane
Likes
1
Share
The last two weeks have mainly been about survival and recovery. The clones were still dealing with the consequences of the heatwave, and some of them had a much harder time than others. While some plants slowly started to recover, others were fighting just to stay alive. The progress was far from uniform. Some clones developed a stronger root system relatively quickly, while others remained much more fragile and took considerably longer to establish themselves. This is where the unplanned asymmetry of this grow really began. The original plan was to create a relatively uniform canopy from genetically identical clones. Instead, the plants were already developing at very different speeds before the main grow had even properly started. At this point, the clones ranged from approximately 10 cm to 36 cm in height. Some were stronger. Some were weaker. Some were still fighting for their place. But all of them are still here. 🌱 INTO THE FINAL POTS 16 plants were selected for the main setup, while the extra clone remains on the bench as our substitute player. πŸ€πŸŒ± The clones were transplanted into four 15 L pots, with each pot divided into four sections. This gives each plant approximately 3.75 L of growing medium. The four pots were placed into two AutoPot Easy2Grow trays and connected to the system. 🌱 PREPARING THE GROWING MEDIUM For this grow, I am using the BioTabs Just Add Water strategy. The growing medium was prepared with the BioTabs components needed to create the nutritional and biological foundation for the plants. ⚑ SILICIUM FLASH Silicium Flash was added as an organic fertiliser and soil improver, providing silicon and essential nutrients to the growing medium. 🌿 STARTREX Startrex was added to help create a biologically active growing medium and support the soil life around the roots. BACTREX Bactrex was used to introduce beneficial microorganisms into the growing medium. πŸ„ MYCOTREX Mycotrex was added to provide beneficial mycorrhizal fungi and support the development of the root zone. πŸ’₯ BOOM BOOM SPRAY After transplanting the clones into their final pots, they received another treatment with BioTabs Boom Boom Spray. I decided to use it as an additional boost while the plants were adjusting to their new growing environment and continuing to develop their root systems. The goal of the Just Add Water strategy is to prepare the growing medium with the necessary nutrients and beneficial biology from the beginning. From here, the plan is to keep things simple. RO water. After a few weeks, the AutoPot system takes over. And let the biology in the growing medium do its work. πŸ’§πŸŒ± The 16 clones are now finally in their permanent positions. The tent is already beginning to fill up, but the plants are still very small and have a long way to go. The next challenge will be to see how these survivors develop now that they have more space and a prepared growing medium. Let's see what happens next. πŸŒ±πŸ’š
Likes
62
Share
@Roberts
Follow
Do-Si-dos auto has grew well. She has a strong fruity, citrus aroma. Smells really good. The colas didn't get super big, but looked to be very frosty and dense. This is my first time trying this famous strain. It looks like it will be really good. I never had any huge issues during the grow. I also didn't juice her with nutes like I normally do to others in flowering. I am curious to test the results once I get her processed. Thank you Zamnesia seeds, Athena, and Medic Grow. πŸ€œπŸ»πŸ€›πŸ»πŸŒ±β„οΈ Thank you grow diaries community for the πŸ‘‡likesπŸ‘‡, follows, comments, and subscriptions on my YouTube channelπŸ‘‡. β„οΈπŸŒ±πŸ» Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
8
Share
And that’s all she wrote for this little one gallon auto! Gorilla punch doesn’t miss if you want density with frost! A serious looker with the terps to follow! Smells like candy for sure! Probably my favorite of all the fast buds autos!!! Flushed this week and she up and drying for the next 7 days. Did a partial harvest on 6 of the tops and let the rest ripen for a week. Worked well.! Taste test will be sooner! πŸ»πŸ’š
Likes
1
Share
Likes
11
Share
@Sauce_XL
Follow
2.3.2024: More of the same. "Plants" are getting bushier. 2 Nodes with the 3rd coming through. Look healthy. Top soil is dry but a few millimeters below is still moist. Once the 3rd node fully develops i'm considering topping but we'll see. Definitely can tell the Crystal Meth has a different structure then the Emerald Fire OG. I'll add pics at some point today. 2.4.2024: Watered 32oz at 6.3ph. No run off. 2.5.2024: No water today. Plant is still super moist. Temp hovers around 77-79 and RH has been struggling to stay at or above 60%, even with the humidifier on and the inline fan speed at 2. I've increased the humidity output with the goal of getting it to the 60%-65% range. Leaves are getting bigger and everything is nice and green. Just raised light to 14 inches from soil and increased power to 50% 2.6.2024: Moving along nicely. Plant is filling out better then the FastBuds see right next to it. Nodes are well spaced when compared to its tent mate. Perhaps thats just the difference in genetics? Raised the light again to 16 inches from soil with the hope of inducing some vertical growth. 2.7.2024: No change to current state. I couldn't help myself so i clipped the single leaves on the bottom of the plant. Probably a big mistake but it'll be a learning lesson if it comes back to bite me. Not much change in vertical growth so i'm thinking about raising the light an inch or two to see if that will help them stretch. Watered 64oz of 6.3ph. Small bit of run off, ph also at 6.3. 2.8.2024: Day 20 from seed. At the moment, the very small haircut i gave the plant didn't seem to have any adverse affect. Lamp at 14 inches from top of the plant, still at 50% power(75watts). Plant doing very well. 2.9.2025: Day 21, end of week 3. Plant is perfect. No issues whatsoever.
Likes
15
Share
Was a tough last few weeks lots of work to be done big problem with humidity finally sourced a good enough dehumidifier and added another 1200 light. Lemon skunks were suppose to be autos but no signs of flowering yet so I'm forcing them with 12/12. No room left in the tent now because photos are going into flower too
Likes
Comments
Share
DΓ­a 40 de crecimiento en nada las pongo a florecer, por si acaso , estΓ‘n a una ppm de 400 , y pH 5.5 y se lo subΓ­ a 6... He aΓ±adido abono biobizz : calmag, activera, algas , y unos grΓ‘nulos de kraken para las raΓ­ces... No le pongo abono crecimiento porque estΓ‘ bien de ppm.... Y dentro de nada ya a florecer
Likes
26
Share
! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! πŸ’š Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! πŸ—“οΈ This Week: after 48 hours of complete darkness (important for seedlings to make sure all plants switch into flower same time), I finally switched my lights to the 12/12 schedule and sent my ladies into the flower. - This one Phenos super strong - more than healthy and going well - Day 3: Foliar spray with APTUS Regulator and APTUS Nutrispray to give them extra micronutrients and give them a little shell for protection. ! always use APTUS Regulator first and mix well with your water before adding any other nutrients for Feeding or Foliar! Thank you for still staying with me πŸ’š ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ Blue Cinderella 99 FF by MSNL https://www.marijuana-seeds.nl/blue-cinderella-99-fast-flowering --- πŸ₯— Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week πŸ”— https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App πŸ”— https://www.trolmaster.eu/ --- 🏭 Grow Setup --- πŸ’‘LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * πŸ“πŸŒ€ PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * πŸŒ€ Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation πŸ”— https://lumatek-lighting.com/zeus-600w-pro-29/ πŸ”— https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ πŸ”— https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! πŸ‘¨β€πŸŒΎ don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Likes
307
Share
@Ju_Bps
Follow
Hello growmies πŸ‘©β€πŸŒΎπŸ‘¨β€πŸŒΎπŸŒ²πŸŒ², πŸ‘‹ Girls continue to grow well, for moment really easy πŸ‘ πŸ’ͺ we can see the difference between this week and last week on the canope I need to do big defoliation each week, they are really invasive, Will turn in flower in couple of Days. πŸ’§ Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Grow + Zym + Sugar Royal (1 + 5 + 1 + 1 ml/l) PH @6 πŸ’‘Mars Hydro - FC 3000 37% 40 cm. Mars Hydro Fan kit Setting 4 Have a good week and see you next week πŸ‘‹ Thanks community for follow, likes, comments, always a pleasure πŸ‘©β€πŸŒΎπŸ‘¨β€πŸŒΎβ€οΈπŸŒ² Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow LightπŸ’‘πŸ’‘ https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller πŸ’¨πŸ’¨ https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Likes
3
Share
Quarta settimana di fioritura anche queste runz layer cake sta venendo very strong πŸ˜‚πŸ™πŸ’ͺ
Likes
14
Share
@Kirsten
Follow
This week, the plant is feeding heavily and has grown well. I super cropped the main stem to help with the plant becoming too tall. It has taken very well. The plant was becoming very tall so I thought this would be something to try out. Here's what I did this week. 18.7.25: I watered with 2ltrs of dechlorinated water PH'd to 6.4, containing the following nutrients; πŸ’œ 2ml Ecothrive Trace PH: 6.4 PPM: 365 22.7.25: I watered with 3ltrs of dechlorinated water PH'd to 6.6 with; πŸ’œ 1 TSP Sea K PH: 6.6 PPM: 485 25.7.25: I watered with 2ltrs of dechlorinated water PH'd to 6.5, containing the following nutrients; πŸ’œ 2ml Ecothrive Trace πŸ’œ 1/4 TSP Ecothrive Biosys PH: 6.5 PPM: 361 28.7.25: I watered with 6.5ltrs of dechlorinated water PH'd to 6.0 with; πŸ’œ 7ml Trace πŸ’œ 1.5 TSP Ecothrive Biosys PH: 6.0 PPM: 351 Thank you for checking in this week and hanging out in the comments πŸ˜πŸ’šβœŒοΈπŸŒ±πŸ™Œ
Likes
3
Share
@DrBud420
Follow
17.05. I don't have anything special to say, of course the weather is terrible... it's 6-7 at night, 15-16 during the day, so they're inside... the temperature inside is 20-21 during the day, at night from 15 to 17 when it's this cold... the plants were exactly 3 weeks old yesterday, today they entered the fourth week and most likely they will wait inside for the fifth week as well because the weather is terrible and there is no point in transplanting yet. Stay High!
Likes
361
Share
@Ju_Bps
Follow
Hello my friendly growmies πŸ‘©β€πŸŒΎπŸ‘¨β€πŸŒΎπŸŒ²πŸŒ², Buds continue to be biggest, and start to be more and more fat πŸŒ²β„οΈπŸ˜πŸ˜‹πŸ˜‹ The #1 and #2, fan leaves and buds leaves are more and more purple πŸ’œπŸ’œ, very beautiful 😍. Start to smeel fruity and frosty πŸ˜‹ ❄️ 🍌 πŸ’¦I give water each 3 or 4 days, 2.75l/plant Water + RQS Bio Flowering Booster + Pk 13-14. Water + cannazym + Sugar Royal @PH6 RQS Bio Flowering Booster - Week 4 THICKER 0.8 ml/l BIGGER FLOWERS 1 ml/l The RQS liquid kit, look doing the job, not overfert or deficiency sign for the moment. Lamp @100% and start to be really close to the plant, but not burning sign for the moment. Thanks community for follow, likes, comments, always a pleasure πŸ‘©β€πŸŒΎπŸ‘¨β€πŸŒΎβ€οΈπŸŒ² Mars Hydro - TS1000 πŸ’‘πŸ’‘ https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 πŸ’‘πŸ’‘ https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light RQS - Fat Banana Auto 🍌🍌🌲🌲 https://www.royalqueenseeds.com/autoflowering-cannabis-seeds/487-fat-banana-automatic.html
Likes
20
Share
@DrGanj
Follow
budding up nicely now. One pheno looks to be growing different bud formations and is much more frosty. O stupidly didn't take a cut of this in veg so I've taken a flower cut to reveg and try monstercropping.
Likes
7
Share
@MaxWax
Follow
The plants are all doing well, unfortunately they are developed differently, in the future I will make a report per plant
Likes
9
Share
@GYOweed
Follow
To my haters: I love oxygen, so put a bag over your heads. Temps are dippin. They drink half gal a day! Hooo wee mofos so this week i got too high and over corrected ph up and down a medium bap cytokinin spray basically did what i want stunt height but also kinda burned it πŸ˜… The trichomes did go bonkers so i dunno. Seems kush mints bottom right doesnt wanna move fast.
Processing
Likes
9
Share
The nugs looks super dense already. Hard to get a smell from her yet. Perhaps a hint of cheese. She is set to give quite the yield. Nothing new to report.