Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
He who stops is lost, as an old saying goes I don't know exactly what the origins are, so here's a new Zamnesia season. We are in the middle of winter and despite growing in an area that isn't the warmest in Europe, it's really cold now. It's 16-18 degrees Celsius in the house and we need to bring the temperature of the propagator growbox between 20 and 25 degrees Celsius. So we first placed a layer of those 1 cm thick "rubberized" floors that are used for gyms, they are easily found on Amazon and are very useful for insulation. Then a heated resistance mat and then the closed propagator on top. Inside with our seedlings and the light on at minimum 20% we reached 24 degrees, not bad in fact the germination is proceeding very well. 100% opening of the seeds in water and almost all of them are opening in our biodegradable peat pots. ----- Our Purple Urke have started, really smooth as silk, no problems with the placenta, it's there nice and straight going towards the light, we trust you a lot baby! It's like most purples, an Indica predominance. WARNING: Placenta Problems ---- ALWAYS look very carefully at the seedlings, if the seed or the placenta prevent the opening of the cotyledon leaves the plant dies after a while. Remove it delicately as if it were a condom or almost. I apologize for the example but it gives the idea, remove slowly and delicately please. WARNING: If you choose biodegradable pots, choose the largest possible ones and not paper/cardboard ones, there is peat which is the main component of most of the soils we use. If you want to avoid transmitting vibrations to the neighbors I recommend you install one of these gym floors under your growboxes, I did it and I also feel safer not to disturb. They are easily found on Amazon in different thicknesses, I took a gym model that is assembled like a puzzle, they are also found in children's shops, they are those floors that are assembled to make children play safely, or to train and to avoid vibrations of the equipment or of any kind. Everything will be grown Plagron Pro Mix with 100% fertilizers let's start with Power Roots 1 Ml/l Plagron fertilizers are available on Zamnesia in convenient Pack formats for all growing styles. I used this with a simple search you can find the other products. ---- https://www.zamnesia.io/en/12119-plagron-top-grow-box-100-natural.html Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/en/11168-zamnesia-seeds-purple-urkle.html Zamnesia Description // A direct descendant of a Mendocino Purps phenotype, Purple Urkle is a high-performance cultivar from Zamnesia Seeds. This feminized, indica-dominant strain is sure to win over any cannabis grower. With a THC content of 20%, Purple Urkle has a lot to offer from seed to harvest and beyond. A grape-flavoured adventure, Suitable for indoors, outdoors or in the greenhouse, Purple Urkle is a very resilient strain. Growers will be impressed by how easy this cultivar can be managed. Purple Urkle can reach 120cm indoors and 160cm outdoors, but if you want more control over the height you can use the LST technique. Purple Urkle has fantastic flavours and aromas that intensify during the flowering phase. Regardless of the method of consumption, Purple Urkle offers tangy, fruity flavours that lean towards notes of grapes, berries and plums. The effects of this strain are soothing and relaxing, with uplifting sensations that make the experience suitable for any occasion, whether in a social setting or alone. Growbox and Air System - Secret Jardin DS120w + fans + Exhaust fans and filters DF16 kit Light - Viparspectra P2000 https://www.viparspectra.com/products/viparspectra%C2%AE-2024-updated-p2000-200w-led-grow-light-with-daisy-chain-function ---- www.zamnesia.com
Likes
1
Share
@REPOOLSIV
Follow
5/10 - Can’t wait to see how she dries up!! I’m not the best when it comes the drying portion but I feel confident everything’s ok. (pls don't judge the fact I used a scrog for the dry, I had to leave to work but figured I could chop, hang, then run out the door. Got too excited and forgot to setup the coat hangers and the only thing in arms reach was the scrog hahaha) 5/12 - Looks like everything is going pretty solid! All leaves are still pretty soft and not crispy in the slightest. 60%rH and 51F 5/16 - Had a few warm days outside and that definitely sped some things up. She still isn't quite dried yet so we're still going strong.
Likes
16
Share
@dubby_m
Follow
Trichomes are: 10%/80%/10% - clear/milky/amber Wet trimmed: 70gr (buds + stems) I hope for 15gr dry buds :) Drying them in a paper box with pc fan as output ventilation (around 24 degrees Celcius / 55-60 % RH)
Processing
Likes
23
Share
Como estamos familia, a día de hoy, viernes, llevamos exactamente 7 días en la fase de floración y todas ellas están marcadas por su sexo. Todo va sobre ruedas, tenemos mínimas de 20,5 y maximas de 28,5 grados. la humedad no supera nunca el 60%. Altura mínima lemon kush 25cm. Altura maxima northern light xl 42cm. •las power plant xl Han pegado un estirón serio, están empezando a ensanchar bastante. •una marea verde desde semilla, con tan solo 5 semanas de crecimiento y un solo trasplante desde que se germinó, para controlar un mal crecimiento.
Likes
49
Share
Ok just finnished a blunt of this a out an hour ago, and I do not smoke blunts lol But it seems only right too do a real smoked reveiw , So the fbt7 has been dry now for about 2 weeks and in a jar and today was the day too take the first bud too try so I rolled a fat one " fat one in photos lol , So for me the flavour just isn't there yet and am hoping that will come after a cure , So I smoked this all too my self and qiukly , Within a few minutes I went white as a ghost as was twitching the the corner hehehe, This is very strong bud and I would go as far as saying it's probably the strongest bud I've had in years , I am what I would describe as a joker smoker , as I turn my bud into oils and do not smoke it , But any serious cannabis smoker will absolutely love this strain , Well done fast buds and thank you :)
Likes
10
Share
@barlobruz
Follow
7/6/2021 - Trimmed lower fan leaves as they were being blocked completely, and a few tips were yellowing. - Continuing to lightly bend the upper branches so the lowers can catch up. - Bought some Gaia Green veg + bloom dry fertilizers as I expect I'll be flipping to flower soon. 7/7/2021 - Watered in a little bit of Gaia Green's veg fertilizer. - Foliar fed w/ DIY kelp extract. - Yellowing/browing on a new leaf, can't identify what it is. - Staked down the branches on the upper mains this evening to open her up for more light penetration, she was gettin' real bushy. 7/9/2021 - Trimmed out middle to expose canopy
Likes
7
Share
Oh man I messed up by not cutting candy kush #3 before the rain last week and lost a little less than half to botrytis 😓😓😞 but can only be mad at myself for not chopping her down sooner and I will still end up with a few ozs from CKE #3. Candy kush #2 just exploded with trichomes and orange pistils over the last 8 days so I'm very glad I left #1 & #2 out,going to chop #2 today or maybe tomorrow if it stays warm and sunny!!! Candy kush #1 is the biggest of the 3(makes sense since I put her in a full 15 gallon grow bag). When I chopped #3 last week cke #1 was no where near done but now almost all her pistils have turned brown and she has milky trichomes all over!! Im the most excited for CKE #2 ,she smells like the old school west coast og kush with a hint of chem to her it's amazing!! Candy kush #1 got more of the sweet special traits in the nose smells very sweet and earthy but im sure both will be amazing smoke no doubt in my mind!! ✌️ ☮️
Likes
20
Share
Realized I was a week behind so I updated a few days early but same same lol she is looking and smelling great. when its calm out she definately has a very pleasurable stank to her within a few feet radius. Shes actually starting to get some nice little flowers on her 😋 mayb i'll get like 10-14 dried grams??? guess well see but whatever it is dont really matter, already stoked to try again next year but i'll be doing things a little differently and also i'll add a couple more now that i know autos solve the issues of outdoor growing in a very short summer season. will not be using fabric pots outdoors anymore being the main change.
Likes
11
Share
@Teezkiee
Follow
Handmade DWC and noticed a great start for week 2 Started in Root Riot cube
Likes
5
Share
@keiffie97
Follow
Sorry for late upload this is closer to end of week 5 beginning of week 6. Theyre huge. Both have grown and doubled cola size and the smell is very pungent. Its like a dookie, lime pepper smell and the bigger plant is very sticky. I see some color changing in leaves to like a rusty orange. I've raised lights to the max I can lift them on the provided hooks. I've been adding sturdy stalk and cal mag past few water cycles to add to ppm and they love it.
Likes
11
Share
@MedicaL
Follow
49 den od přepnutí GG4 Sherbet krásně sype :) Purple Lemonade začíná házet barvy 👍🏻 Jinak spokojenost 🍀
Likes
10
Share
Likes
6
Share
@gr3g4l
Follow
Visto que ya estamos a mediados de agosto y pareceria que quieren empezar a florecer voy a empezar esta semana con el bloom. Mitad bloom mitad grow 51d nuevo tratamiento preventivo con TD + Solabiol, Foliar. Una vez el tratamiento para evitar que las lluvias limpien la planta suelo ponerlas bajo techo. En cuanto deja de llover las vuelvo a sacar. dia 54 126ctms la nº1 y 102 la nº4 y una clara evidencia que ahora empieza lo bueno. Como puede observarse han ensanchado las ramas , han crecido notablemente y empiezan a mostrar claramente sus primeros pistilos.
Likes
5
Share
🔥🔥🔥 Absolut Klasse Genetik, unglaubliche Blütenentwicklung und der Duft erst! Sobald ich das Zelt öffne wird der Raum mit einem Fruchtig tropischen Geruch geflutet, ich bin gespannt wie das noch weiter geht!
Likes
44
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had a high temperature of 84°F. We had intermittent storms and showers throughout the day that took care of the watering. The powdery mildew treatment worked well on these. Day 2 we had a high temperature of 88°F. We had on and off rain and thunderstorms throughout the day. The rain took care of the watering. These responded well to treatment. I'll treat again tomorrow. Day 3 we had a high temperature of 94°F with clear sunny skies. I watered about 5 gallons from the well. I treated these again with Growers Ally fungicide. The warmer nights, blazing sun, and this fungicide have really cleared up that powdery mildew. They've also decided to go all in on flowering. Day 4 we had a high temperature of 94° with sunny skies. Heat index was over a hundred. It was super hot today. I watered twice about 8 gallons total. Everything looked good after treatment. Day 5 we had a high temperature of 95 and partly cloudy skies. I watered twice about 4-5 gallons each time with well water. Day 6 we had a high temperature of 91°F with partly cloudy skies. I watered twice today 4-5 gallons each pot, each time. These look great after treatment. Day 7 we had a high temperature of 88°F with sunny skies. I watered 5-6 gallons each pot. This week was a success. The powdery mildew issue has been cleared up. The Growers Ally fungicide worked great. These girls have rooted into the ground through the pots which is helping some of the 100+heat index days. It's hard to keep these pots moist in that kind of heat. Overall it was a great week.
Likes
37
Share
######################################### HARVEST (Day 110 / December 21) ######################################### ----------------------------------------------------------- GROW SUMMARY ----------------------------------------------------------- Grown in 4x4 tent - but I only used 2x4 because of heater and dehumidification but each plant averaged a 2x3 canopy. Each plant had a dedicated light, Sage 2 used the HLG 300 V2 Rspec and Sage 3 used the CMH 315. It's not an accurate comparison of lights because there was some overlap but I'm just utilizing my resources the best I can for this dedicated autoflower tent. The plants were grown in hydroponics using a custom two-site PA hydroponics clone RDWC system with Advanced Nutrients Sensi Coco line, Microbial Mass and Orca for beneficials. All around a pretty easy grow and things went very well. Sage #3 had an issue just after stretch, and I think I burnt it a bit when the CMH was at 22". I also experimented with a single water change which was only performed when switching to bloom nutrients around week 7 and turned out surprisingly well - see the results below. It's always fun to see the two contrasting phenotypes side by side. ----------------------------------------------------------- HARVEST ----------------------------------------------------------- From day 106 to day 110, I just stopped feeding and let the ppms run down. No dark period and no flush. On day 110 they were chopped. I probably could have let them go a bit longer, but my concerns were growing with Sage 3 and the sugar leaves being brittle and flacking off onto lower buds promoting bud rot. The smell of this flower on the plant was funk and was hard to control the funk... even with a carbon filter. Trichomes are slightly amber, mostly milky overall. I'm convinced hydroponics can add a couple of weeks of veg time to the run compared to coco/soil. Cutting the Scrog net was required. ----------------------------------------------------------- DRYING ----------------------------------------------------------- The plants were dried in a 3x3 tent, so I had to cut the plants in 1/4 sections to fit in the 3x3 drying tent for a slow dry. Branches were hung to dry on burlap twine in a tent in complete darkness, branches upside down. The temps were dialed in at 60F by pointing AC at the intake vent on side of the tent. Humidity was dialed in at 63%/60F for 24hr, 62%/60F for the next 48hr. Then 60%/60F for the third day and onward. Ambient RH in my house is 30% due to winter so I had to use two humidifiers and an Inkbird controller to add humidity to the room and block the humidity streams from hitting plants directly. AC Infinity T6/S6 exhaust and intake fans were on the setting of '2' during drying until day 8, then I could turn down to a setting of '1' once the plants were not transpiring excess moisture. I pulled the branches to trim as they were ready around starting around day 12. ----------------------------------------------------------- TRIMMING ----------------------------------------------------------- I trimmed each branch as it was ready but there were times when I pulled more than I could trim without being interrupted so a few branches did overdry on my trim table due to the low ambient RH due to winter. Very few fan leaves on branches, so most trim was all sugar leaves. I went tight with trim to ensure a better flower product and more supply for edible totaling in over 11 ounces of trim product. ----------------------------------------------------------- CURING ----------------------------------------------------------- Flower product was transferred to 1L mason jars averaging 35g of product per jar. I added a mini hygrometer to each jar and boveda/boost 8gr humidity pack. The RH averaged 62-64% when trimmed flowers went in jars. I started by burping once a day for the first seven days, once every other day for the next seven days, rolling jars often. The burp was only for 3-5 second for air exchange. Because the flower product was already at almost 62% when packaged in jars, quite the contrast from drying in summer conditions, I only needed to burp once per day and mold really wasn't much of an issue due to low humidity in winter. ----------------------------------------------------------- YIELD ----------------------------------------------------------- * Weight calculated at 62% humidity after 10 day cure. ============================== FLOWER PRODUCT ============================== Sage 2: 301g (10.75oz) Sage 3: 377g (13.46oz) ---------------------------------------- Total: 670g (23.93oz) ============================== TRIM PRODUCT ============================== Sage 2: 204g Sage 3: 135g ---------------------------------------- Total: 327g (11.67oz) **I went tight on the trim for better flower product and sufficient supply for edibles, and is calculated in overall yield. ** All major fan leaves, stems, and branches removed from trim product. ============================== TOTAL OVERALL YIELD ============================== Flower: 678g (24.21oz) Trim: 327g (11.68oz) ---------------------------------------- Total: 1005g (35.89oz) (2.24lb) ============================== SPACE YIELD ============================== 1005g / 12 sqft (3x4 canopy) = 83.75g per sqft ============================== WATTAGE YIELD ============================== 615 Watts / 12 Square Foot (3x4 canopy) = 51.25 watts per sqft. 1005g / 615 watts = 1.63 grams per watt ----------------------------------------------------------- PRODUCT TEST ----------------------------------------------------------- On day 10 of cure, I tested the flower and passed some to a few friends for their input. Feedback was positive. One little bud was given to a friend and he reported it stunk his entire car. Sticky, trichome-covered fire! Smoke is smooth, no cough. White ash. The 60/40 (sativa/indica) is a blend that is on point. Sage Scout definitely is a heavy hitter; upwards of 3.5 hour noticeable head/body change with no couchlock at the end. In regards to flavor and smell, it's not fully there yet on only day 10 of cure. The flavors/scents are still muted but I expect the flavours to prevail after 6-8 weeks of curing. Very funky and strong smell that bursts past the mason jar lids. Piney sweet scent. ----------------------------------------------------------- REGRETS ----------------------------------------------------------- Honestly, I only have two regrets with this run. 1. More aggressive lolipopping! I just feel if I had lolipopped more, I would have had a denser product overall. The flower product is indeed dense, and all in all, I'm happy with the result, but it's I'm adding as a reminder for the next run. I need to be more selective. 2. I slacked on the training of Sage #2 due to the hard-to-reach factor which probably affected about additional 1-2 oz of yield. ----------------------------------------------------------- NEXT RUN ----------------------------------------------------------- 1. I’m was very happy with Microbial Mass product in combination with Orca. Once again, I was overall happy with Advanced Coco blend for RWDC. I went with Coco product because Coco is similar to hydroponics, the AN Coco line just has added Calmag to it. I didn’t really see any issues with the AN Coco line and I like the autonomous factor of AN sensi products because my photoperiod tent takes some of my attention, so it is nice to have this autolower tent on auto-pilot for the majority of the grow. 2. When harvesting, I did find a few spots of concern in the root system, so I will definitely upgrade the pump from 250gph to a 400gph for better flow to combat that issue. 3. My experiment with a single water change when switching to bloom nutrients was a surprising result. Sage 2 (purple pheno) performed well with no deficiencies which I had trouble sorting out the deficiency on Sage 3. I continue to wonder if it was salt build-up, but it seemed to start shortly after the change to bloom nutrients so maybe it was a nitrogen/calmag issue. I may add an additional water change mid-flower (week 11) to the next run and see if it makes any difference is the same conditions happen. 4. I'll also like to move the two-site system to the front of the tent for better accessibility to train the plants. 5. I'm also looking at the floorplan of the tent and I think I can run a single system in parallel next to this two-site system and still have room for heater/dehumidifier and still keep accessibility for training. ----------------------------------------------------------- FINAL THOUGHTS ----------------------------------------------------------- Night Owl genetics has performed once again in my RDWC setup. I also feel a dedicated light for each plant really helped improve the yield. If I calculate a 2x3 space for each plant, with a total of 615 watts / 12 sq ft, running at 51.25 watts per square foot is the result. In regards to gram per watt, I've calculated the result is nearly 1.63 gram per watt when using 1005g / 615 watts. My goal was a pound per plant, I was happy to exceed that goal line with autoflowers with 2.24lb total yield. ----------------------------------------------------------- THE END ----------------------------------------------------------- Thanks for checking out my diary! I typically journal in my notebook but I put some time and effort into documenting my grows on this platform in hopes it will help a new or experienced grower with their DWC journey. Any questions or suggestions are welcomed. Happy growing!
Likes
10
Share
@Sadhus
Follow
Petit rempotage, beau système racinaire bien développé et dense