Just discovered this site. Wish I could have uploaded from the start 😢 Anyways 4 weeks into flowering, 2 weeks to go for harvest. Super exited as this is my first time growing a hybrid from a legit breeder! So far all trics are cloudy with a few ambers showing up. Any advise is much appreciated!

D35 - The first day in the fifth week of veg for #2 and the fourth for #1. I gave both girls around 1.2-liters of water @ pH 6.3. I topped the second girl for the second time today, six days after her first topping, and I will top the first girl for the first time tomorrow. I also removed the large fan leaves from her fourth node as they have served their purpose. D36 - Today, it was time to top the first girl for the first time. Exactly one week after the second girl. She had grown a lot in four weeks to a height of 33 cm and a massive 50 cm wide, looking luscious and very healthy. I topped her the same way as the second girl, just above the fourth node, and removed everything below it. I stripped her down to the bare essentials and honestly felt a bit bad for doing that to her. I didn't keep any clones this time, as I still have the clones from the second girl. I might take a cut from her later, though, considering how vigorous she grew. Finally, I gave her around 1.5-liters of water @ pH 6.5. D40 - The first girl has recovered well from her abuse a few days ago, and I should be able to top her again in a couple of days. The second girl is still a few days out from her third topping. D41 - The end of the fourth week of veg for the first girl and the fifth week for the second girl. Sorry about the porno-light pics. I was a bit late, and my lights had already gone into sunset mode.

Heute ist es soweit! Bräuchten evtl noch knapp eine woche. Aber hab schon neue bestellt und das ne woche zu früh🙈😅😅🤷‍♂️ Also chop chop😅😅 Diesen geilen cut gibts wie immer vital und virus frei bei ROOTS-FARMS. The best you can get

start of LST (gentle bending some branches) one of the laddies are getting taller than her sisters! Overall progress seems to be normal, the laddies are getting bigger and stronger day by day! Watering 500 Ml per day !

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

New week, new growth.. Will hopefully start the LST and Topping in a few days. They are really starting to grow. Fan leaves looking healthy and big. Girls coming with vigorous growth now, everything dialled in and happy. Just adjusting the EC/pH as needed when the girls show me the relevant signs/deficiencies if any. D31/D35- Decided they were in a good enough place to start topping the girls, all 6 topped and just some defoliation of the bigger fan leaves that are shading the growth shoots some HST was also done. We were also due a water change, so I cleaned the whole system just to keep things extra cleanly, very important in a RDWC system. I also switched over to a sterile system instead of using beneficial bacteria so I will experiment and see how this goes. Time to let the girls ecover before the next training session. Cruise control for now.

She seems to be recovering from the water log roots…after she dries out I will feed her some fish fertilizer…in case this is a nitrogen issue.

1/18: Got my new 10t Dabpress...bout to get sticky up in here... Built another DIY Co2 maker and put it in the bottom of the tiny tent with the other Co2 makers...that air is exhausted into the closet, so any CO2 not utilized in the tent has another chance at being used before being exhausted from the building. Seems like the new UVB bulb is intense enough to stress the plants.👍 1/19: Fed today. Added humic acid. Took some photos and video...ooh la la...😍 1/20: Took photos of the ladies in the tiny tent....yowsa!

Всем привет. Я назвал этот дневник "Old tree" и это не просто так, этому кусту 13 месяцев! Также интересный факт это растение уже дало урожай после чего я решил оставить 30% от растения, обрезать ему корни и пересадить в горшок поменьше после чего отправил его на вегетацию 18/6 и оно начало вегетировать. Также с этого растения мне получилось взять много хороших клонов, но теперь старушке пора на пенсию ее работа выполнена! Надеюсь это будет интересно.

Hey guys :-) . Today the plant was sprayed again with neem oil. There weren't any more trips to be seen after the second application, but to be on the safe side, you did it again today get a cure. That's why the beautiful dark shimmer on the leaves :-). The ladies are developing well and have 1 week before I change the time to flowering. Normally I would let it get bigger and train because the tent only has 80x80 and 180 watts are available, so I will switch it over soon enough. This week it was poured twice with 0.8 l each time (for nutrients, see table above). Otherwise everything was cleaned and, as always, everything was checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Wet trimmed Frankie completely. I took my time with it and finished it in the evening hours of 3 days. Pictures of the cured buds will follow.

Day 82. Its 81 day from seed touched soil ! If leaves would be healthier, i would run them at least one more week, but it is, what it is. They spent 24 hours in darkness and now its Trim Jail !!! ;))) Harvest Day ! Day 88. Tried bud from each, clearest weed straight from drying rack ! Only 3 feeds makes huge difference to harshness at the beggining. Still Queen is pure Tangie, can it be seed mistake ? ;))) Day 89. Boy i am f@ckingly surprised !!! Heather - I love You, Your team, Your strains !!!! I still don't get how, but numbers are amazing, Thank You very much !!!! Will update this diary as cure goes, but i feel so many nice words were unspoken, felt that FB will change my view about Autos - and they DID !!! Amazing house ! Happy Growing !

All looks good.nice bud formation.every third or four watering i give girls only water. Chinquita banana 77cm tall. Og kush 46 cm Bad azz kush 68cm Tomorow i will start adding green sensation

Hey here we go again.. in the pics I explained how to clean the lava rocks but to make it easier I will put them here. LAVA ROCK CLEANING. 1... fill sink with hot water and about a half bottle of hydrogen peroxide . 2 ...dump rocks into sink 3....shake out rocks from roots...I suggest you do this in another sink then add lava rock to other sink..it keeps from adding to many roots to water sink. 4....skim off all roots from top of water...now while the lava rocks sit in the water..clean the buckets. 5...take fitting from buckets and add to a cup filled with hydrogen peroxide let sit 6...clean buckets with hot water and hydrogen peroxide....dry bucket 7...take fittings out of cup clean off and clean inside fittings..then wash off and put back into buckets. 8... use a colander and add lava rock to it and run hot water over the lava rock as you move them around...then add warm..then cold water this will help make the roots brittle and easy to remove...shake off all water. 9...put rocks back into buckets 10 ...set room back up with all new lines... Enjoy your grow, good luck, have fun Smoke a fatty..see you next week Help out a fellow grower.

Hi so the plants expanded rly rapidly after the beginning of week 3 and i started to tie the strong bottom branches fown so they wouldnt block any new nodes from light. I also continue to gently leaves that would block the new nodes from light. I also got additional ventilaton, in addition to the air intake. Actually i had a small accident where im sure i heard a branch snap like rly loud, for one moment i thought i killed it😰😨but there was no visual damage even after 5 days, i cant see that it would die off or feel lose, like it almost feels like its didnt mind too much about it. Like it was so loud i thought it was the main stamp for a sec, im really happy nothing too bad happened due that incident 😀 Video is from mid week 4

I did start to burn the lower leaves with the 300 ppm nutes last week, but changed out the water entirely after 24 hours. keeping it real low from now on. currently at 185 ppm. hard to see in the video, but there are at least 8 nodes. flowers are also starting to pop so i'll switch to flower nutes at next change. light is 18" above and was turned up to 100% today. plant is insanely dense! video was taken after I tried and tried to leaf tuck. it's tough when it's a stout little dwarf like that. also does give off a faint sour smell now. cool...