Likes
Comments
Share
@PalmaGrow
Follow
19 - 25 noviembre Se realiza amarre en brazos más altos poda de bajos y hojas al igual dóblanos estás dos ranas para generar estrés y emparejar con las demás
Likes
13
Share
@greenAF
Follow
Lights Main: 40% Lower 100% Feed: Listed Above then ec/ph adjusted D91 Nothing much new, still and ugly duckling but the part that counts is looking good, and there's a lot of it lol. Buds are starting to fill and there coming from everywhere. Its a shame i had issues here and there, she could have looked so much better but all that counts is what in the jar at the end, Pretty much all the issues are feed related, I already ordered jacks for the next run, im done trying to decipher the fox farm matrix. D93 I stretched her out some more today, a lot of new fast growth 😁😁😁 =============================================================================================== Weekly Power Usage: C02 Controller: 0.03 kWh Lower Circulation Fan: 1.83 kWh Upper Circulation Fan: 1.04 kWh Inline Exhaust: 1.12 kWh Inline Intake: 3.69 kWh Dehumidifier: 14.5 kWh Lights Main: 17.0 kWh Lights Lower: 1.99 kWh Total 41.20 kWh ===============================================================================================
Likes
92
Share
D91 Still a couple of weeks to go at least. She is putting on nice long bud mass as all bud I'll get off her will have very few sugar leafs. And with the top 30cm of the nodes bent outwards it's allowed the light to reach down deeper into the plant itself, and well, you can see the results, bud sites galore. Not much left to do with her. I threw her into a heavy flush for 24hrs first flush run-off was coming back at 2900, way too high, salt and nute residue is been left behind because of the poor P-K uptake that control the spread and uptake of nutes. Got her down to 980 today with her final flush before going into her rest. After the flush I poured 100ml of 2ml/l of cal to help break down the nutes behind so the plant can uptake them, this is very important when doing a flush to lower your TDS add some cal to it as this will keep the plant sucking not only thr water and leaving the nutes behind, cause you need cal espically in subs with nute build up it has to be broken down and will help to avoid nute lock or going into an unwanted flush to early. I'll be dropping her next feed by 200ppm down to around a 1000. I will still give the nutes I've been given just a little less and she needs to get ready for a flush but be kept with enough to keep her mass of growth going. RH is between 55-60%:air been blown in is reading at 48-50% temp is 22c in tent it's 21.7c in the dark and 27-28c with the light on. With my new 4inch intake smart fan im going to set it up so it blows 100% air in at the top and a 4inch intake fan will suck out 80% I'm hoping by doing this it will change the RH of the room 48-50% into the tent creating the same environment. The air that is brought in is filtered by a carbon filter, no need for 1 to blow the air out. 19/3/22 As you can see I have the RH as best as I can get in my grow room, I've installed the smart fan and inserted the sensor giving me 57%RH 75F in the tent, with the light off, it's rather hot today, much hotter than normal, it's normally 21c in my room it's 24.5 today. RH is at 50% in room, hopefully by installing my old intake fan in the lowest part of my tent and suck out 80% While 100% gets blown in on top will bring the tents RH to the same as the room, that's the hope anyways. But 57%RH is still okay, not optimal but not too bad neither 21/3/22 So, I tried out my new method. Of having my smart intake fan suck in 50RH and a bottom intake fan at the end sucking out older air at a lesser speed had it running for 8hrs, no change in humidity whatsoever just dropped the temp by 1.5c. I think the fact I have a 70x70 with so many plants has set the RH and thankfully it's not what it was which was touching on 80rh at some days. A bigger tent and I'll really be able to dial in my grows now I have all the tools to control RH/TEMP from S/H. For now 57%RH when it's low and 62% when the lights are on for a few hours. Stays around 57-60% atm for around 85% of the time. Temp is constant and doesn't change without my control within a range of 4-6c change difference, this number I have no problem in changing and I'll be making my tent a lot cooler after this wk ends. I'll be keeping her at 18c with lights off and 28 with lights on. As for the plant, she has fully turned the corner and I can say whatever the issue was, which no 1 can still tell me what it was not do I know. It wasn't a def because it was so random and hit all different levels of growth. But, thankfully she has passed it, am really dialing in this coco grow. I know exactly how much water she takes without spilling a drop of run-off unless I want it to. The buds, well, they are small at the moment but they are so fucking dense and hard I really hope they get at least 30% bigger of the next 2 wks. The last few days some has but on at least 10% bud mass and all sites have moved out of pre-flower (stigma), so growth is over for the plant, it's just bud sites now, how you can tell is your sites will start to give off their aroma and will start to get sticky to the touch. 85% of the plants buds are all in the same range mature wise or only a few days out from their sister buds. Still some 15% that still has stigma but as this is at the bottom of the plant I know she will not grow anymore but maybe a little if any around these sites. 21/3/22 GRRRRRR stupid rust spots all over her again today, yday she got a mix of all the nutes above, one of these nutes is causing this, I am 75% sure it's overdrive. Really annoying, as there is no deficiencies, no signs, just these poxy rust spots. So annoying, as NO 1 can tell me exactly what they are, it's not a def, the plant ozzs health, she's the pic of it, every leaf stands tall, very good color, slight old nute burn very little on about 10% of the leafs but these stupid rust spots are stupid. Overdrive, or 1 of the nutes is doing this, I reckon it's this as it's only been given that the past 10 days and I'm nearly sure this is the cause, but I can't be sure, and until I figure it out I really don't feel comfortable moving forward with the AN line. Sadly I think I'll be dropping everything but big bud, bud candy&voodoo juice. 22/3/22 Was going through my buds and man, they are so sticky you would nearly say they are done until you look close at them, there still full of pistils, white hairs, the bud growth will come past them, so there is still a big push yet to come so I was hoping to start dropping the micro nutes but I think that would be a massive mistake and cost me dearly on harvest day. Fuck it, I'll flush the shit out of it for 2 weeks on flawless finish and then a week on water and 2-4 days in the dark just on water. With much thought I pushed the PPM back up to 1450. I've decided to drop overdrive. After 24hrs of flushing my coco like crazy I'll be happy to start her back on nutes in 24hrs when she's drank the 2.8-3.2l of water she's currently holding, the run-off from that was 1800 btw, but with salts and so on from the last feed I've learnt with AN the PPM reading is what you give it, not always the Run-off. Yeah I'd trust the PPM reading 2moro if i was doing another ppm run off test, but as im not ill go by what im putting into it, cause my weekly flushes/flushing in general in pretty good, very little nute lock experinces with mixing so many nutes 22/3/22 Messaged AN and sent them pics and info, by going through my nutes and the fact that I gave some big bud in the same window as overdrive causes these rust spots. Thankfully I finally have an answer as to the rust issues. Just a bad mix with nutes that shouldn't come into contact with each other. Thanks AN Thanks for reading, drop a like and I'll know u drop by and I'll do the same gottagrowsometime
Likes
17
Share
As this is my first grow I'm not too sure what else to comment other than I found it all great fun, worried alot and learned alot. Can't wait for the next harvest
Likes
Comments
Share
missed a whole week in this I deliberately didnt post or take any pics in week 7 because I burned my baby( used my cucumber feeding water which is stronger) so bad I was ashamed to show her to the world I did a flush but the damage done to her beautiful leaves is permanent but she still coming buds coming in nice small from the shock of the burn but still healthy plant .
Likes
1
Share
Hey guys! New week, here we are! As always, every Sunday is cleaning day. Took everything again from the tent, washed the saucers. Was also time to cut down some leaves as it was starting to look very bushy and hard for the light to get through it. During that time, came across with some bugs under the foliage, which isn't a great sign for sure. Not to mention the fruit flies that move in and are making my life a little chaos. Reducing now the RH a bit, and watering now on every 72h instead of 48h to keep the grow as dry as possible. Increasing the ventilator speed was another attempt, it so much air circulating should be hard for them to make a living inside. Just put now more of those fly traps and will add a couple glasses of cider vinegar here and there, as it attracts most of the flying things with success. Note that some plants are yellowing and that's never a good sign. Though for few weeks it was Nitrogen deficiency, but after increasing it and the CalMag values, the problem persists, so I'm inclined for something bug related. Besides that, temps are still very stable, RH was changed, now to 40% tops, and the light went a little lower to get it closer to the plants - always with the light burn effect in mind. 40cm is the line between the tops and the lamp. Flowering is looking good, buds are forming well and seems that's gonna be a good ending if I can keep the bugs under control. She's on pre-flower, switched the nutrients and increased a bit the feeding volume. That's all folks, have a great week
Likes
49
Share
@FoTwenny
Follow
🗓️ Week 17: 3/23 - 3/29 📆 Week 7 of 12/12 🌄 The plant is starting to go into senescence and presenting some beautiful colors as she begins to fade. 💡 Received new lighting courtesy of Growers Choice. They sent me the ROI-E420 with the Master Controller. First impression is amazing. Looks and feels like very high quality build. The spectrum seems more blue than the 3000k lm301H Kingbrite bars I have been using. The bars are thinner and packed with a lot of diodes, so they do run a little hotter than the KB at full power. I adjusted and now running them at 90%. For now the Kingbrite bars are being used as side lighting dimmed to about 30-35% depending on Grow room temps.
Likes
59
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Tropicana Cookies by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for the outstanding, award winning strain from my friends at FastBuds... Tropicana Cookies Auto: I'll be running Tropicana Cookies Autoflower which is a 60/40 Indica/Sativa Hybrid. "Tropicana Cookies Auto is the perfect variety for growers of all levels, especially beginners as this strain performs very well outdoors and indoors, and can produce up to 500 gr/m2 in 56-63 days without needing extra maintenance. Reaching up to 110 cm, this strain grows fairly tall with medium-sized branching, showing its mixed heritage. Definitely the right choice for those with a high tolerance looking to get their hands on the strongest autoflowers out there. You can expect an extremely powerful and long-lasting high that’ll boost your mood and give you that extra push you need to start your days on the right foot. This variety offers the whole range of citrus and woody flavors with a strong candy-sweet background that will keep you coming back for more and more."* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/1- Setting up the AirCube system when off without a hitch, with very easy to understand directions. I did have one issue, the Drain Petcock on the 25g reservoir was broken during shipping. After a phone call to GrowAce, they had a replacement one on its way to me which I received in just a couple of days! I did however make one addition to the system. I placed a pair of air-stones, one in the Reservoir and the other in the Distribution Bucket to really oxygenate the water. I started all my seeds by first soaking them in tap water for 12 hours, then transferred them into pre-moistened (6.3ph) peat pellets. I placed the pellets in half Solo cups in the tent with 24hrs of light under which they sprouted within 48 hours. I kept the tent temperatures between 80-84℉, the RH at 65-70% and made sure that the pellets stayed moist, not wet. 10/3- All of the Tropicana Cookies are looking healthy and have good color and vigor! I'll be moving them into their fabric pots which have already been pre-moistened in the next day or two, or as soon as I see roots emerging from the pellet. 10/5- Today I moved all three Tropicana Cookies into the fabric pots, adding some Xtreme Gardening's Mykos into each hole before placing the peat pellets. I have the HLG 650R set to 15% and hung 30" from the seedlings. Tent temperatures are 80-84℉ with RH running 65-70%. 10/7- Well there's the first week on the books for these three little ladies and they're looking fantastic. I'll be giving them their first feed this coming week and they should start to really take off... stay tuned! 😎👍❤️ 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Likes
7
Share
Oct 17: ideally these would get a few more weeks or moved indoors, but I’ll just harvest them in two days on the last nice day before we get freezing temps. These were just a timing experiment to see how they’d do in the available time. Oct 18: have been watering with 25 C water in late morning once the sun is up for the day. The idea being to warm the soil while there is direct sun to promote flowering at this late stage. Oct 22: forecast improved so still going for a few more days. Oct 23: harvested 8 Bubble OG and one Hash Bud clone for total 850 g. Bubble OG was not ready but weather turns cold soon. HB was nearly ripe. 850 g wet from nine clones.
Likes
150
Share
Bonjour à tous !! La semaine passé après avoir dénigré l'apport en Azote pour ces demoiselles , nottament et surtout sur la Black Domina 1 et Black Domina 7 , cette semaine je leurs est préparé une potion de purin d'ortie peut être un peu trop forte.... Le manque d'azote est présent et vas se résoudre mais je pense que l'apport que j'ai fais à du leurs brûlé les feuilles.... Ce qui me rassure c'est que ce sont uniquement les "vieilles" feuilles. Des demains je les "rincerais" abondamment à l'eau claire du ruisseau sans apport quelquonque. Espérant que ça leurs fera du bien !!!!!!!!! Pour le reste , la Black Domina 0 ce porte bien malgré les problèmes similaire que c'est sœurs dont elle à pus avoir au par avant durant les premières semaines de croissance (je pense que la variété Black Domina est assez fragile mais ce n'est que mon humble avis....) Les Big bud explosent ! Et les Purple sont très lente à venir... Sinon tous ma l'air plutôt bien dans l'ensemble ! Apport pour les demoiselles cette semaine : Black domina 1 et 7 : Purin d'ortie RICHE + cendre de bois + peau de banane + Marc de café* Pour le reste : cendre de bois + peau de banane + Marc de café* * le Marc de café , à présent je le mets dans un gros sceau d'eau pour qu'il se mélange d'autant plus lors des arrosages. Je pense plus facilement assimilable par les plantes Mes engrais : Azote --> Purin d'ortie // Marc de café Phosphore --> Cendre de bois (barbecue 😁🙌😋) Potassium --> Peau de banane NPK général --> Fumier de vache Bonne journée à tous !!!
Likes
26
Share
Plant 1 is ready the other two get another 12h and 24h in dark tent Taste fruity and berrys White Ash
Likes
127
Share
💩Holy Crap Growmies , we are outdoors and in the Ground💩 👉It's been another full week 28 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's in full on flower , ahead of the rest 😁👈 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈
Likes
2
Share
Putting some ofnthe smaller girls in greenhiuse while i flower the bigger plants in this tent
Likes
8
Share
5/3/2020 this is my first grow. Today I took the seedlings and put them in there pots. Tomorrow ill start the lights. I added... 2 tsp Big Bloom ¼ tsp Holy Mackerel 1 tsp Boomerang 5/4/2020 I just checked on the seedlings. There both already popping there heads out of the ground already. 5/5/2020 Turned the light on for the first time for this grow and for the first real time ever. 5/6/2020 The first real leaves have sprouted. Also gave her ¼ tsp microbe Brew ¼ tsp Kangaroots 1 tsp Kelp I kelp you 5/7/20 As per advise. I'll be adding only water for the next couple weeks. Ph to 6.5ish. 5/8/2020 I watered with PH'd water around 6.4PH. it seems like it hasn't grow much in the last couple days. The G.G. us already starting to grow its second set of leafs. Wich the Zkittlez isn't. I just hope I didn't fuck anything up. I know there two different Phenotypes. (strains) I know I shouldn't be going off each other. But it's something I'll add just for the records of them growing. 5/9/2020 I'm just going g to start off saying I think I'm over watering my plants. Im watering every 3 days or so. I also think I may have stunted my life one. I really hope its me bing a noob and worrying to much. It would really suck to have to kill it cause of something I did. Maybe its too many nutes. Idk but I'm going to just water with allot less regular pH'd water. And let it dry much more between watering. 5/9/2020 (#2) Here's an extra entry for the day. I have the exaust fan just blowing into my room.... until today! Its going to be summer very soon. And with that comes a ton of heat. Now my place isn't that big and it gets hot and I mean like 95⁰ inside when it's 75⁰ outside. I do have A/C's that's an added cost. I didn't see spending all this money to grow and not set it up properly. A few days ago I woke up late and some how in got to 95⁰ in the tent I was lets say not very happy about it. And I know its going to happen again unless I do something about it.. So what did I do about it? I installed a dryer vent to vent the hot air to the outside. With a summer/winter box. To eather recycle the air or blow it outside. I also ordered a Ac Infinity cloudline t4. I'm also going to be making a board with a place to put the led drivers out of the tent if need be. And have a place for the T4 monitor/control.
Likes
8
Share
@Salgeezi
Follow
From the looks of it. I am in early stages of root rot. Plant is not growing as fast as it was at all. It can be a few things. Light penetration into the bucket. My water temps are around 70f. So I think that's okay. I had some extra mylar from a grow I did years ago. Cut pieces to go over the kids hopefully that helps. I took out all additives besides CalMag. They were fouling the rez as usual. Dropping the Ph as usual. I think it's also the cause of the root rot. I have sprayed soaked with h202 and have added it to the reservoir after a cleaning and a water change. Looks a bit better. I'm located in Canada and I cannot find hydroguard anywhere. Which kinda sucks. Any alternatives would be great. Thanks
Likes
31
Share
Heeey! 👋 Another update! :D This week I made another transplant, this time from the drink cups to a small 3.5 liter pot and I also applied some more mycorrhizas to my babies! 😃 From both of them Pistachio seems to be the one who's developing faster and Matcha is trying to catch her sister. The plants ended with about 19500 lumens! Couldn't rise them more because of heat issues 😟 The only tricky part this week was when I decided to add a bit of growing nutrients to my plants so I ended up watering them a lot after the transplant and the results were quite shocking! I barely added 2ml of total nutrients per liter but the runoff water I got was around the 1400 ppm which all honestly scared me a lot! That's way too much for two young plants (and I believe some of the excess nutrients can be seen on Matcha) nonetheless they are still developing so I'll just continue with water for now till they start to lose color (the Light Mix I used should have enough 'food' for at least 2 weeks, so that's good I believe! Besides that everything went well. I'm using tap water for my humidifier and its sediments are being thrown into the air by it, but so far it seems my plants are doing well. During the last 4 days the plants developed a lot in their new pots so I'm quite happy for that! If things go well next week I'll be moving them to their final container! Thanks everyone for reading! I hope you'll all enjoy my new timelapses and photos! :D
Likes
31
Share
@valiotoro
Follow
Beautiful buds super sticky✂️ Delicious smell something new to me! Cant Wait the curing to taste this beauty
Likes
3
Share
I'm always open to feedback! seeing as how I've never made it this far, I am pleased with where I am so far. I see plenty of bud sites.. still a long way to go