Likes
Comments
Share
Eine neue Woche steht an. Ich hab mich jetzt nun nach vielem hin und her überlegen doch dazu entschieden die Blüte einzuleiten. Ich bin gespannt was passiert und freu mich auf die Woche. 25. November Cookies gelato wurde mit 4l gegossen zusätzlich noch mit Green sensation und Bloom Dünger. Tropimango wurde mit 2,5l gegossen ebenfalls mit Green Sensation allerdings ohne zusätzliche blütenährstoffe. Es sollte genügend florganics im subtratsein, dass es vorerst nicht nötig sein sollte zusätzlich Nährstoffe geben zu müssen. Royal Runtz hat 3l Wasser mit green sensation und Blütendünger erhalten. 26. November Pflanzen wachsen. Bin zufrieden. Heute besteht kein Handlungsbedarf. 27. November Der dritte Blütetag. Man merkt dass die Pflanzen an Wachstum zulegen wollen. Cookie gelato und Tropimango wachsen uneingeschränkt. Die Runtz hat einen Bruch erlitten und ich hab kein Superkleber oder Panzertape da 28. November Aus mir unerklärlichen Gründen scheint das bisschen Kreppband auszureichen, um den gebrochenen Ast am Leben zu erhalten. Würde behaupten zu 4/5 war er durchgebrochen und hielt eher an einem Rindefaden. Reicht scheinbar um den Ast weiterhin mit allem zu versorgen. Habe leichte Sorge dass der ganze Stress, den die Runtz bisher schon hat mitmachen dürfen, zu Zwitterbildungen. Cookie Gelato kommt weiterhin vorwärts. Tropimango hat 3l Wasser bekommen. Sie hatte als einzige einen furztrockenen Topf Cookies Gelato ist nun 46 Tage alt Tropimango ist nun 41 alt. Royal Runtz ist nun 30 Tage alt Blütetag 4 29. November Cookies Gelato 4l Wasser bis Drenage Roy’s Runtz 3l Wasserbis Drenage Ab- und Umluft wurde auf AC Infinity umgerüstet und läuft jetzt über ein growcontrol. Fyta-Sensoren liefern mir jetzt aktuelle Zahlen aus dem Substrat. 1. Dezember Die Woche neigt sich langsam dem Ende zu und es ist einiges passiert. Die Runtz hat einen Bruch diese woche erlitten aber entwickelt sich prächtig. Der gebrochene Ast ist der stärkste. Traue mich allerdings noch nicht das Klebeband zu entfernen. Die Cookies sieht wunderschön aus ❤️ Tropimango muss immer wieder entlaubt werden, macht sonst gute arbeit. Das Zelt hat einige Upgrades bekommen und die neuen Möglichkeiten auf Messungen, klimabedingungen und Substratanalysen erleichtern einiges.
Likes
10
Share
@LPina
Follow
Divided into two boxes 14 in 1x1 20 in 120x120
Likes
120
Share
Well, this is week five and these lovely ladies are taking off. The only problems I have had (knock on wood) was the autopots valve sticking and flooding occasionally. I think I have them figured out though. Customer service from them is amazing. I will as always update throughout the week. Take care and happy growing. 🙂
Likes
2
Share
- DAY 71 (13/08) I have defoliated most of the burnt leaves. In the evening I sprayed the mix of neem oil (neem oil, water, potassium soap and citric acid). So, I am continuing with the washing of the roots. The plant visibly needs nitrogen, for the next irrigation I will go back to feeding. This time hoping to be able to feed without problems and that the burns on the leaves will not return. The girl is growing out of all proportion. Within the next 2 weeks the hormones that will send her into bloom should be triggered. Everything that I will do relevant in the days of this week I will update it here in Week Comment. I am open to advice, I would be happy if you comment with what you would do in my place. - DAY 75 (17/08) FEEDING So, from now on I will feed with half tap water and half distilled. I removed the lemon juice by replacing it with BioBizz PH Down. The starting water should be less loaded with calcium and potassium now. I irrigated 3 liter of water with: - 1.2 ml Micro - 0.6 ml Grow - 0.6 ml Bloom - DAY 76 (18/08) I sprayed the mix of neem oil (neem oil, water, potassium soap and citric acid). Day/night air temperature on average for this week: Day 28-36 °C. Night 18-24 °C.
Likes
5
Share
@CreoWeed
Follow
The total yield was 40.7 grams dried, and it took around 7 days before ending up in the jar. Plant is not very leafy so the trimming part doesn't take long time. The taste is pretty soft at the beginning but the high is impressively strong and pretty mental. That's all lads, thanks everyone that followed this journey and stay tuned stay high for the next diary!
Likes
12
Share
@KalooNie
Follow
These gals are doing fantastic! Smell is really starting to come out now, smells like a very strong citrus pine 👌🙌 Switched them to full strength flowering nutes and they're doing pretty well. I probably should have transitioned them a little earlier but a little stress doesn't hurt, they're growing just fine! Heat is also an issue but they'll manage 😅 8-4-18 :: Largest plant's bucket got empty on accident; Filled a 15gallon reservoir of full strength nutes and pumped the solution into the bucket as always. Next day my largest plant is dying and the other two are fine, looks like lockout. Flushed for a day and then added nutes, no improvement.. Orange pistils are appearing pretty fast on it too as if it's trying to ripen but not grow. My heart is broken😰 UPDATE: Realized I was an idiot and didn't plug up the holes I drilled into the top of the buckets (I stick a hose in there to fill them up) and the roots were exposed to light.
Likes
211
Share
@PapaNugs
Follow
After topping last week we've just been watching them grow. Bending down the branches to help them spread out. Over this next week I'll start my lst ties to help pull them down and out.
Likes
1
Share
Stinks getting really frosty day 21 of flower
Likes
4
Share
@sjrseid
Follow
The final week! 12 weeks since germination, 11 since first sprout. These Apollo F1's vastly outgrew their advertised size and bud density. I will be cutting them down tomorrow and updating with the harvest page and photos soon. Great second grow!
Likes
4
Share
0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH
Likes
1
Share
@DrBud420
Follow
29.06. Rainbow Sherbet 1# Day 65# 1# is always thirstier than the others, at the very beginning she didn't like the strong sun at all, so I moved her to a mild shade where she adapted nicely, then slowly moved her more and more to the sun, where she is now constantly in direct sunlight and except that she gets thirsty again and starts to rebel against direct sunlight... until the problem mentioned below, she behaved great in the sun. Rainbow Sherbet 2# Day 63# The second one was affected a lot and today I removed a lot of its leaves again, it is missing 40 to 50% of its leaf mass, but it is holding on. 29.06. The plants have finally started growing again, some have almost completely recovered, some are still recovering, and some are in critical condition. The plants stopped growing for almost a week, maybe even that long, during those days they literally made no progress, the situation only worsened to the extent that I was sure that all but one plant would wither... There were storms yesterday and the day before yesterday, and that's why I'm late with the update because I couldn't take a picture of them, the gusts of wind were really strong. Watering is now more frequent and abundant, now I water them every 3rd or 4th day, everything depends on the temperature on those days, whether there is wind, how much moisture there is, etc. The last time they were watered was before the storm and they are already thirsty today as you can see in the pictures, it will be a day and I will water them in the morning. Today I removed their leaves again and now I can freely say that they have twice as few leaves as they should, so when it's time for defoliation, I probably won't do it at all, or at least not a lot. The day before yesterday it was the end of the ninth week for the plants, now they are already in the tenth, but in order not to miss the ninth week, I will write it in the ninth and I will write the next update 2 days earlier, more precisely, on time. The day before yesterday it also rained, there was a downpour for about 40 minutes, but the spray that I sprayed on the plants failed to absorb, it simply stuck to the leaf, it is greasy, you can see that in the pictures, the leaves are shining. I think the biggest problem was caused by the fact that it sticks to the leaf and when the sun is strong, the leaf simply burns. In general, do not use the product from the last picture, it can easily kill the plants. Most of the plants have almost recovered and are getting better, however, the rain can't stop that shit and I also tried to wash it, but it's not worth it, so there is a high probability that the problem will return when the temperatures rise again and the UV is almost extreme and that could be a problem... the temperatures have normalized again to 30 during the day, but in 4-5 days they are announcing again around 36-7.. I will copy the problem that befell the plants from the previous two diaries of other strains from a few days ago in order not to explain everything again, so whoever is interested should read it in more detail. 25.06. the condition is medium sad... the plants have not progressed at all, why? Well, because I'm a moron who doesn't think... Basically, what happened.. I sprayed the plants with an organic preparation against thrips and similar pests and if there was no need for it because this is growing outside and absolutely these little things can't do anything for them except something miserable to slow down their growth, but nothing terrible... and now, I didn't even want it to slow them down miserably, so I ordered a product called "SMC Spidermite Control" I sprayed the plants overnight, the next day when I came to the site, I had something to see... which is the worst I sprayed all the plants, instead of checking on one and only then spraying the others...autos I wanted to spray all the same, luckily I only sprayed 5 of them, as if God himself told me "wait until tomorrow to see how the plants will react" and continue...I come to the site and I have something to see...all the plants, but all, some more, some less, but the leaves were massacred blue, black, purple, there were all colors, everything was there, but the least healthy leaves, as if I had sprayed them with the biggest poison, I think that even in that case they would have passed better... was it the product itself or the sun that was strong during the day (I sprayed them at night and the nights were around 18 C in the coldest part of the night, so they had time to dry, it's not that they couldn't dry, but it all stuck to sheets, it was all shining, I think they could see how bright it was from the plane, but literally... I removed almost 50% of the leaf mass from some plants, from some smaller ones... the tips that were supposed to grow and be ready for a new topping just started, so they had stopped completely for a couple of days literally... the situation is now as you can see in the pictures, there are a few leaves that appeared after spraying with that product, and it is still appearing, but very little, just, just, and this there was no point in leaving the leaves that I plucked because they were completely destroyed, I have never seen them in my life... The site I bought it on said that the preparation was organic and completely safe, nowhere did it say that it can literally kill the plants, not even on the preparation itself... I am very sad about this, I have been spraying them with clean water every morning before sunrise since it appeared and the tops have slowly started to grow, this crap is appearing less and less, and I have no more leaves where should I remove it, I would just kill the plants... I hope they will recover (except for one plant that is in a critical condition and the automatics that were sprayed are also in a very critical condition, they are young and will hardly survive this) but if not, I have another white runtz that is not in the diary, it is a little more than 3 weeks old, so I will transplant it into 200 liters of soil, so at least something will come out... I feel very sorry for the plants, I already have enough money invested, and this is also my therapy, cultivation heals me… I'm very angry with the people who sold it to me, and they didn't warn me about such a thing, if it's not written on the bottle itself and on the website, and I've been buying from them for years and they know what I'm growing... the product is not cheap, I paid money for something that will kill my plants, fuck... I mean, fuck money, I feel sorry for the plants, but you understand what I'm saying... I'm also angry at those who put the product on the market in the first place, and I would say all kinds of things I did it, but it's better to keep quiet... and mostly I'm angry with myself because I believed what it says and didn't check the product, like the biggest amateur... But what's here is now, let's move on... Today is the 57th day of the plant's life, yesterday was the end of the eighth week. Watering is now more frequent, every 3-4 days, it depends, the heat is already high, today it was at least 40 C in the shade, the forecast says 35. Since the last update, the plants were fed once and for the first time after transplanting, this morning most of them were fed for the second time, the next watering or two will be with clean water. Stay High and Keep Growing!!! Growers, please avoid this crap, the product is called " SMC Spidermite Control" This crap seems to have been imported from Ukraine,from chernobyl directly, not from UK lol Only Positive Vibes Stay High and Keep Growing!!!
Likes
9
Share
@Headies
Follow
So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.
Likes
43
Share
🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FastBuds 420
Likes
6
Share
​In der zweiten Blütewoche der Permanent Marker zeigt sich die fortschreitende Internodienelongation deutlich im Zelt, was der Pflanze zusätzliche vertikale Präsenz verschafft. Während das vegetative Strecken noch anhält, differenzieren sich an den Triebspitzen bereits die ersten floralen Cluster, die eine gleichmäßige generative Entwicklung über das gesamte Blätterdach einleiten. Dank der stabilen Strukturvorgabe durch das Training erfolgt der Übergang in die Blütenbildung äußerst homogen, was die exzellente Vitalität dieser Genetik unterstreicht.
Likes
3
Share
Missed 7th week. She looks very well, big and strong, in the process of creating big buds, lots of hope for this one.
Likes
69
Share
@Natrona
Follow
Sour Jealousy Auto FastBuds 2025 Outside Grow Week 7 May 11-17 FLOWER 1 Sour Jealousy has started to flower. She is 18” now after a 6-inch spurt. She really benefitted from last week’s rain. This week’s weather has been cloudy and sunny but the temps ranged from 93 high and low of 53 at night. I watered and fed 2x with Kelp 30 ml/g and TPS1 4ml/g. I included some garden pics and some cool boats. I live in a coastal area with 6 bridges. Since maritime law still governs commerce, the boats have the right of way to vehicles. On this day I got stopped by the bridge opening and was close enough to see the boats. A parade were luxury yachts. Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫
Likes
13
Share
@Dunk_Junk
Follow
She only grew 1cm this week. She's really charging through flowering. Trichome production has been high this week. I wish there was a way to view the pictures in hi-res on a desktop pc instead of the small window. Timelapse this week is almost useless. No input from me other than watering/nutrients.
Likes
4
Share
Couple of new upgrades for the garden 4x4 tent couple small fans and small 4” in-line filter
Likes
26
Share
Harvest 2 of 3 plants and everything was very good. I will updated soon with pics of the 3rd I harvest later than the two. Thanks to Barney’s Farm and Advanced Nutirents, to the love of the plant first of all and to all growers here and in the world. 🙏🏻💚 Updated: harvest all 3 plants for 100g/plant 💪🏻
Likes
17
Share
We’re officially in the first week of flowering, and the stretch has already started! 🌿 The plant without LST has shot up quickly, growing tall and strong. However, I noticed a few rusty spots on the leaves, which might be a calcium or magnesium deficiency. To help, I’ve slightly increased the CalMag and Bloom nutrients for that plant. 🌱 Other than that, everything seems to be going well, and I’m happy with the overall progress. It’s exciting to see them enter this new phase, and I can’t wait to see how the buds begin to form! 😁✨