Likes
Comments
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱
Likes
9
Share
@420medic
Follow
Absolutely love this cultivar, make sure you have adequate ventilation as these buds are very resinous and dense. It was a very nice plant to grow even though it was small in structure made up for the weight in the buds
Likes
34
Share
@GreenLion
Follow
Hello everyone, This 8 week of vegetation, she started growing ans looks little bit better, but we have same problem. I have about 40-50 cm from light, and think to switch on 12/12 for flowering stage end of this week. What do you thin guys is it good idea or wait one more week?
Likes
Comments
Share
@qhartman
Follow
Video is not that great, getting cramped in there and alittle hot at 29 as the high for a few hours a day
Likes
13
Share
@Suemchen
Follow
Sanlight EVO 3-60 at 80% Day 113: looking good and watered again🌊. Watered with rain water, 1 ml/l Cal Mag, and 1 ml/l Green Sensation Day 115: Watered with rain water, 1 ml/l Cal Mag, and 1 ml/l Green Sensation Day 119: looking good 👍🏻 watered with out supplements 👌🏻 Just rain water 👍🏻
Likes
16
Share
@Dunk_Junk
Follow
She's looking as pretty as anything this week!! I think she's almost there. Just waiting on more pistils to change colour. Trichomes are mostly milky. I note she is quite smelly!!!!!!
Likes
12
Share
Buds von Pheno #1 (Tribute•D•Cut) mein absoluter Favorit wenns um die reinen Blüten geht haptik terps appeal 1a ! Folgen in kürze,in ein paar Tagen wenn sie ca 20 Tage curen konnte,werde ich ein paar meiner Favorit Buds von dem cut hochladen!
Likes
10
Share
Questa panty punch auto ha un profilo TERPENICO DOLCISSIMO, fruttata,e vaniglia...un profumo.....Una vera delizia tutta da gustare........ È la prima volta che faccio la panty punch auto, e devo dire che anche se ancora non la ho assaggiata, sono sicuro che sarà un altra pianta autofiorente che ci metterò la firma, come la forbidden runtz auto della fast buds(molto valide per la mia terapia)
Likes
7
Share
Likes
3
Share
Hey there, Everything‘s fine so far. EC is 1.6, pH is ~6. SanLights are now at 100% and ~40cm above the plants. Since Flower Day 25 I give Green Sensation. How do you like the field? See you.
Likes
4
Share
And the pre flower stretch starts, she is starting to show the bud spots and getting some vertical growth, lets hope for a huge yield !
Likes
9
Share
@Rizik86
Follow
Day 50 - Checked PPM 1,030. Added 10 mL of CalMag Micro Grow and Bloom. Added 5 mL of Big Bud Sensizym Bud Candy Nirvana Rhino Skin and B-52. PPM is 1,550. Plant is 51 inches. Raised the light to its highest position. Tons of bud production. Day 51 - Checked PPM 1,590. PPM went up so i diluted with RO water. PPM is now 835. Plant is 52 inches tall. Leaves are getting glossy colored and sticky. Day 52 - Checked PPM 1,560. Diluted again with RO water. PPM is 725. Bud production scaled up. Green mass forming between white hairs and sugar leaves. The stock reminds me of the body of a lizard. Plant is 54 inches tall. Day 53 - Checked PPM 1,130. Added RO water. PPM is 650. Added 10 mL of CalMag Micro Grow and Bloom. Added 5 mL of Big Bud Sensizym Bud Candy Nirvana Rhino Skin and B-52. PPM is 1,620. Plant is 55 inches tall. Tons of white hairs. Bud production everywhere. The mylar emergency blanket allows the light to penetrate deep and low into the plant. Day 56 - Water nearly gone. Added 2 gallons of RO water. Added 20 mL of CalMag Micro Grow and Bloom. Added 10 mL of Big Bud Sensizym Bud Candy Nirvana Rhino Skin and B-52. PPM is 1,690. I can see trichome production (frosty buds and sugar leaves). The hairs are still white. Light is 2 inches above plant. Light is nearly against the ceiling. It stays this way til harvest.
Likes
12
Share
@Brujha77
Follow
Beginn Woche 3 Blüte. Entwickeln sich gerade alle 3 recht gut. Heute gab es wieder 20ml Green Bull 🥀💪 Tag54 Heute wurde mal einiges unten herum rausgeschnitten. Nun haben die 3 wieder etwas besser Luft💨
Likes
12
Share
@Suemchen
Follow
Sanlight EVO 3-60 at 80% Day 22: did nothing today 👌🏻 Day 23: looking good and watered again🌊. Watered with rain water, 1 ml/l Cal Mag, and 1 ml/l Green Sensation. Day 25: looking good and watered again. Watered with rain water and 1ml/l Powerzyme, 1 ml/l Hesi Boost, 1 ml/l Cal Mag, 1 ml/l Bloom Complex and 1 ml/l Green Sensation. EC at 1.0 and a pH of 6.4.
Likes
24
Share
@Roberts
Follow
FBA2505 is getting harvested today. She has a strong smell and frosty purple flowers. She has a sweet fruity aroma. I had a lot of issue with this grow, but she came through it well. Thanks again Fast Buds, Medic Grow, Xpert Nutrients, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
43
Share
Finished her second week of flush, plan on harvesting her as soon as her pot has fully dried out. Trichomes appear mainly cloudy to the point where the buds appear white. I’ve smoked a few test buds that I took a couple of days into her flush, the taste even at that point was unreal! By far the strongest strain I’ve grown to date. Happy with how everything looks, until next time 🌱💚
Likes
11
Share
@gsimd
Follow
Day 62 - Last week was a rinse. This week I returned to watering with the Fox Farm nutes, adding the Bembe and Cha Ching to the trio and Cal Mag. Day 68 - Stacking nicely and the pistols are turning red. Watered with the Fox Farm Big Bloom, Tiger Bloom, Cal Mag, Bembe and Cha Ching .
Likes
24
Share
@BunnyBud
Follow
31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water).