Likes
Comments
Share
Likes
10
Share
@Hempire
Follow
Hello growers ! This week started the pistils colours white into orange /red. Let’s check at the final of the week it should be ok for the harvest :)
Likes
3
Share
Totaly forgot to take some pics from the dutch passion strains this week... all I got is a group photo and short video! Could have been a bit more hands on with the training but seems a like a nice and even canopy it´s emerging 😍 Defoliated a bit and trimmed the lower branches.
Likes
4
Share
Likes
5
Share
@Ninjabuds
Follow
I'm really happy with the gas tax x obama runtz plant is doing. It started out so small, I wasn't sure if it was gonna make it. But lately it's taken off. The leaves are a lot bigger and the colors are so vibrant. I can tell it's happy and healthy now. Well, it's Christmas again. This year feels a little different, though. Maybe it's the snow blanketing everything, or the way the tree lights up the whole living room. Either way, it's cozy and warm, even when it's freezing outside. I'm really looking forward to seeing what Santa brings. I hope I get that new video game I've been wanting. But most of all, I can't wait to spend time with my family. We always have so much fun This past week was a good one for the plants. They started the first week of their stretch, and they've already grown a decent amount. I can really see them filling out. It's cool to watch them grow so fast. I can't wait to see how big they get by the end I always get a little worried at this stage, like they're not gonna get as big as I want them to. But then I remember how they always end up surprising me. By the end, they're always perfect.
Likes
7
Share
Likes
52
Share
Hello and welcome to week 2 of veg phase for these five Epsilon F1 Hybrid ladies. Last week is now complete with daily updates and media so please check it out. For this week well frankly I am expecting massive growth. I have taken 3 fingered leaves from Normani today and five fingered from Ally. It takes more time to photo and diarise but it is rewarding to look back on! See you tomorrow! Day 9: Nothing to report. Sorry for lazy photos. Oh... I joined twitter @UnorthadoxDude Day 10: Fertigated 5l. Loving Ally's party hands 👈👉 Day 11: Normani has overtaken Ally as the tallest and largest plant. Dinah has overtaken Lauren in a similar fashion. All girls kooking good except for some odd marks here and there (see video). Today after the photos and video and when she was back in the tent. I took about 4 or 5 leaves off each girl. You'll see tomorrow. If you're here from Twitter, where I am also @UnorthadoxDude, please say hello in the comments! I've just joined and want to gauge if it is worth the time. Day 13: Heights: Ally 23cm Normani 28cm Lauren 24cm Dinah 19cm Camila 17cm The girls have begun stretching it seems. Day 14: Fertigated 5l and performed LST and defoliation. Normani height was 32cm. End of week summary: Huge week of growth and these ladies are only just getting started. The pheno difference of Dinah is stark but super interesting.
Likes
4
Share
Lief alles gut, ein paar stehen noch, somit werde ich noch was nach Posten.
Likes
13
Share
Staring to put on some weight and fill out. The Runtz muffin is putting on a pretty orange color so far very vibrant compared to the tent. The Persian pie is coming in nicely, both phenos are just covered in sparkles.The runtz has a nive cake and fruit smell to them insanely sticky to the touch. The Persian has amazing bud structure with a musky lemon smell that coming in nicely. Insane sticky to the slightest touch with a kush kind of smell after. Made some tea again for the last time before i let them eat the reat of the food they got i like a 3 week if not 4 squeze of the juice to make the smoke that much more pure. SO EXCITED!!!!!
Likes
7
Share
Eccoci qui... Tutto va per il meglio, questa settimana ho eseguito Lollipopping e Defoliation per far si che le cime principali sprigionino al meglio il loro vigore. Siamo verso la fine del progetto ora bisogna solo aspettare la fine... Grazie a tutti per il supporto🔥🌲❤️
Likes
44
Share
👉The time finally arrived for the harvest, mostly cloudy trichomes with scant few amber, very few white pistols, and the leaves had either faded or were fading. The run-off pH would quickly plummet and the run-off EC would spike. This may be an indicator that the plant is ready but that only would be conjecture on my part. The overall look of the plant to me said it was ready. The aroma was super strong citrusy and intoxicating. THe leaves were fading and there were virtually no white pistols. 👉I harvested bottom to top. I hung each cola on alphabetized clothes pins with gardening wire attached for hanging on the rack. The buds are dense and shaped like pine cones. I trimmed it semi-tight, but left some of the smaller frosty sugar leaves. The buds and sugar leaves are very frosty but it wasn’t as scissor freezing as the Gorrila Glue I grew last year. I measured the post trim wet weight on a self-calibrating digital scale. I checked the accuracy of the scale with a set of scale calibration weights and it was accurate at all weight ranges. I logged each colas trimmed wet weight and hung on the rack. I have a 42” tower fan. For first 12 hours I ran it at its medium setting, then reduced to lowest speed. I rotated the side facing the fan after 24hrs. Then after another 24 hrs I placed them in paper sacks with to top open. I left the buds on the clothes pin hanger and clipped the bag to that. After another 24 hours I closed the tops. Another 24 hrs and I test weighed a couple of colas. I monitored for another couple of days until the weights averaged 20-25% reduced from the initial wet weight. I then cataloged the weight of each cola and placed each into its own jar, most got one of those small cheap hygrometers. These hygrometers have been calibration tested and I know the drift of each. My target humidity is 62%. I would open the jars for brief periods of time during the next couple of days until the humidity stabilized at 62%. Once stable I placed 62% humidity packs in the jars. I took out most of the hygrometers for the next plants cure, but leave some of them with the best buds. The Queen cola was 20g when placed in the jar. That is about 24% remaining weight from trim. 24% is a little on the high side of the humidity target range. The jar the Queen cola is in, is a wide mouth counter jar and I will be toking that bud primarily and it will dry out the fastest. I have compensated the weight I entered on the dry weight spec to reflect about 20g more of humidity loss and another 30 for the stems that are left on the bigger buds. The final weight of the buds going into the jars was 254g (not including the larf at 23gdry). 200g of plump sticky pine cones for the final weight is pretty nice for a 1 gallon pot. 👉I wrote this review at 3 weeks before the 6 week cure mark. In my short experience of being weed rich, its been interesting to take note of how the flower continues to ‘cure’ as time goes on. I have found that 6 weeks isn’t a given for when its ‘cured’. I have observed that as weed ages it changes. I have not noticed much difference with 2-3 week old buds at 62% humidity when compared to 6 weeks from jarring. But I do notice significant difference around 6 months of age. The flavor is enhanced and the buzz is stronger. It maintains this level then 8-12 months it has leveled off and all strains are becoming more ‘couch lock’ inducing. My observations are not scientific by any means. This is just my 8th plant in the 2 years that cannabis became legal for home grow in my area. But I still have each of the plants and rotate which one I consume. 👉I loved growing this plant, and hopefully gained more knowledge. It fox-tailed a bit at the end. I think my frequent fertigation techniques contributed to most of the issues I had. I think I was a little too conservative with nutrient mix and irrigation volume and frequency. I used only 10% expanded clay pebbles in the coco mix as opposed to the standard 30%. This was slightly problematic at first before the roots filled the pot. Fertigation events would cause erosion and caution had to be taken around the seedling. I placed a layer of hyrdoton pebbles across the surface and the issue was solved. Once the pot was filled with roots it took 10+ minutes to give the plant 2L of solution. The pot was packed hard with roots. This may have been a contributing factor to some of the possible nutrient issues I had. I dont think the nutrient issues I saw had much impact on the final outcome. To get 200g from a 1 gallon pot is wonderful.
Likes
4
Share
@Bobbo94
Follow
These are the wedding glue autos from fastbuds. I couldn't end the excitement and I really didn't want to make another grow diary considering most of the photos I would have used for the diary, is already in this strawberry G diary. These are spectacular plants and vs the strawberry G thus far, the wedding glue is more desirable too me because the resin product, the bud stature, the aroma is strong and delicious like candy berry, it is going to slap! Solo cup run after this too finish the rest of my auto seeds, then onto photoperiods for the summer grow.
Likes
128
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 42 and she's just killing💀it👌 👉Added straws within the Tiny pot to help watering in week 4 👈 So I'm starting to see she needs watering every single day and now need nutrients 🙃 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
5
Share
Ich lasse sie wachsen und tue nur den Lampen Abstand ändern und auf 60-70cm halten
Likes
5
Share
@Romepucks
Follow
4 weeks old, I wonder if I should start any training or let her do her own thing🤔...
Likes
31
Share
Erde ist eine sehr luftige aus einem Garten Fachgeschäft, welche sehr leicht vorgedüngt ist, mit einem NPK Dünger. Möchte versuchen alles aus dieser Sorte heraus zu holen. Beigesetzt habe ich 1 Sack mit 10 Litern Plagron Perlit, welches vor der Zugabe gründlich abgewaschen wurde. Eine ganze Packung Royal Queen Seeds Easy Boost habe ich von Anfang an der Erde beigemischt. Dann wurde der gesamte Airpot mit seinen 38 Litern Volumen, einmal mit Wasser gefüllt, damit der Organische Dünger aufquellt. Dieser wurde dann mehrmals von mir durchgemengt, damit die aufgequellten Organischen Düngerteile sich möglichst gleichmäßig in der Erde verteilen. Nachdem die Erde nach über 1 Woche durchgetrocknet war, wurde diese erneut aufgelockert. Dann kam der Samen Zamnesia Banana hinein, welchen ich 4 Tage vorgezogen habe. Der Samen ist sehr, sehr Gut, da er von vorne herein eine sehr starke, praktisch absolut gerade Wurzel nach Unten gebildet hat. Das weiß ich, da ich den Samen in einem gereinigten, durchsichtigen Plastikbehälter vorgezogen habe, in dem vorher geiles Minzeis aus dem Aldi drin war. Start war der 07.11.2020. Habe Gestern das erste mal einen Hauch von dem Plagron Flüssigdünger auf 1 Liter Wasser gemischt, ca. 0,5 ml. Die kleine mochte die Dosis sehr. Mit PH Down habe ich den Wert von der Mischung auf den PH Wert 6.6 eingestellt. Lampe ist ein SMD Chip mit 65W, genauer der Cree CXB 3590. 1 Der Photonenstrom liegt bei 137,5 µmol/s, was ich für einen Einzelnen Chip in dieser Größe für sehr ordentlich halte. Auf den Wert komme ich, aufgrund der Angabe einer 4 er Lampe, die 4 solcher Chips enthielt. Diesen Wert habe ich dann durch 4 geteilt. Das habe ich wiederum getan, weil ich keine Angaben mit einem Strahlungsdruck Messwert zu diesem Chip im Internet fand, nicht einmal in dem Herstellerdatenblatt. https://proemit-576b.kxcdn.com/shop/media/pdf/b9/c8/eb/ds-CXB3590-1.pdf https://www.ledrack-growled.com/wp-content/uploads/2018/08/Produktdatenblatt18-LedRackPlusKit-TechLed_Swiss.pdf 1 Weiter im Text, dieser ist erfahrungsgemäß stark genug, für 1 Pflanze auf 500mm x 500mm. Growbox ist ein Eigenbau aus OSB Platten mit 12 mm Stärke, welche 4 140 mm Lüfter mit Vorwiderstand, welche durch ein Universales 12V Netzteil versorgt werden, verwendet. Reflektoren sind eine Rettungsdecke und Alufolie. Ich bin gespannt wie der Grow wird, denke ich werde mehrere Triebe durch Topping und später durch Entlaubung.
Likes
Comments
Share
Hola a todos!!. Esta divine rapier viene creciendo a pasos agigantados, en una semana ha crecido 30 cms!!. La he regado al igual que los otros diarios 2ml x litro de agua de top auto, top bloom y top candy. El resto de los días solo con agua.
Processing
Likes
6
Share
@itchy23
Follow
So I'm doing a little experiment with the clones: took the 2 lowest viable branch pairs and put 1 of each pair into a Jiffy pellet and a rockwool cube. All preloaded with Roots Excelurator and SuperVit at 5.5pH and added some mycorrhizae to boot. Only had 2 days to prespray the branches with Clonex Mist and have been spraying the clones every other day with it. It's been a week with no roots showing yet but the clones have looked healthy throughout and never showed signs of wilting (which I remember happening for a short period the last time I cloned). I expect roots to show in the next day or 2 but who knows. And now for our main story: LSSH1 is showing white bud tips! This is most likely due to the ridiculously close proximity to the light. Not sure what to make of it yet but I guess we'll see if it has any effect on quality 😏 The buds have expanded a very tiny amount and I expect much more this coming week but from my understanding this strain does not produce really dense nugs to begin with. From the results so far I would say the plants have liked the switch to Canna nutes although I would recommend going with the light feeding schedule at least to start with. PK1 still with very tiny buds but it's getting more light now. PK2 seems to be growing faster now on Canna nutes. BTW: on the rare occasion I get my hands on some trichs, my fingers have an unmistakable lemon candy smell 😍