Everything is fine and they doing awesome They are in week 6/7 ish and some start to fade nicely. It’s hard to tell exactly when week1 started. I saw some pests(spider mites& caterpillar)attack one some leaves and remove those and hopefully mites don’t spreading to much.because spider mites love hot long days and low humidity and the days getting shorter and cooler day by day. I check them every 30 minutes to make sure everything is fine:)

The last week of vegetative state. Some of those are pretty dense, they look like salad. Maybe adding a bit of blue to this 80 CRI LED is a good idea to get a bit more elongation. Work a lot on LST tonight. I'm trying to make some clone with a technique I've seen long time ago. I put the cube directly on the plant. I remove the skin surface of the branch before putting the rockwool cube around . All cube are wrap in plastic to avoid excessive drying. No hormones. I will wait one week before cutting those clone out of the plant( thats my dead line before flowering). They all receive 200ml of PH 6.5 water this morninig and 200 more this afternoon. Next watering in the morning tomorrow, Working on ESP32 wifi based co2 meter for controling co2 level in the next grow. =============== 2020-05-26 =============== Everybody receive 300ml of ajusted 6.5 water. Adjusting LST and adding some defoliation. Watering clone/cube with 5.5 ajusted water with blunt top a seringue. ========= 2020-05-27 ========= Trying to water 3X day the clone/cube with 5.5 ajusted water with blunt top a seringue Everybody have received 125ml in the morning. Worked on the low cost wifi Surge protector 6 space smartbar. 15AMP@120v https://mygeeni.com/products/geeni-gn-sw003-199-surge-smart-protector-white/ Found a way to get rig of the cheap stock firmware. Flash it with a alternative firmware(tasmota) using wifi/without any opening/soldering. Those are pettry nice , timer capable, you can remotly control and monitor them After setup you can acces the bar using the small web interface or via a MQTT server and home automation software. I've posted a image of the result for those 2 examples. So im thinking to turn this into a tutotial to help grower to acces flexible technology and software at resonable price. You can comment to signify your interest in this! =================== 05-29 ================== Everybody back on water until monday/switch to flowering. Added some tutor for the next stage. Moved the cam for top view I cleanup/defoliate the bottom of each plant.

Day 68- transplanted to 3gal smart pot Day 69 - not sure if it’s coming into flowering or not. Think it’s close Day 72- I think I see pistols.. but again unsure.

Almost to the finish line

📆 Semana 8 La planta continúa adaptándose al cultivo en suelo, mostrando un crecimiento constante y una buena respuesta a las condiciones de exterior. Durante la semana se aprecia un desarrollo uniforme, con nuevos brotes activos y un aumento progresivo de la masa vegetal. El color se mantiene saludable y la estructura comienza a ganar altura y presencia, mientras el sistema radicular sigue explorando el terreno y mejorando su capacidad de absorción. ⚡ EC: 1.0–1.1 💧 pH: 6.2–6.5 🌡️ Agua: 20–22°C 🌫️ Humedad: 50–60% 💡 PPFD: luz solar exterior 🌡️ Temp ambiente: 18–26°C 🔥 Nota: La prioridad sigue siendo el desarrollo radicular y la adaptación completa al entorno. Una vez establecida en el terreno, el ritmo de crecimiento debería aumentar notablemente durante las próximas semanas. Seguimos creciendo fuerte 💪!

Mainly just monitoring things this week and watering and on humidity control. Got a deal on a large 20 inch fan and added it to the gorilla tent. and a deal on a Honeywell oscillating fan i added to the other flowering tent. Nighttime humidity has been hard to control even with my dehumidifier running while lights are off in the lung room. I want to run it during lights on but running into wattage issues on certain circuits i don't want to overload i only have 15 amp breakers. At was at least able to convince the "roomates" to let me set the nighttime house ac down to 73, so that was able to help me get tent temps down from high 80's to the low 80's during their "daytime" while having the light 100 percent. Vivosun tent is doing a little better with the humidity. I have a little more wattage in the lights and the canopy is a little more manageable so not transpiring as much. Towards the end of the week they hit a wall at their drinking and noticed a little more run-off than usual which is little to about a quart. out of 6-8 gallons in each time. One of the waterings this week included some microbe and fungal inoculant to give the rootzone an extra boost now that the plants are going to focus more on feeding themselves. adding a little bit of azomite to the water in the hopes theirs trace amounts of soluble silica in it. I want to start using a water soluble silica specific feed but I haven't found anything that's completely organic and soluble so that's why i opted to add some silica fixing microbes to fill any gaps the boogie brew may not be filling.

So 3rd time and so happy again this is the best auto I’ve ever grown I think that’s about 50 chemdawg seeds I’ve planted and it always comes out the same very strong genetics this has

Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.

Day 54 from spout: Did a 4gal compost tea on 4/13 of worm castings, molasses, craft blend (bigger handful), build a flower (smaller amount), and frass for both plants. light/medium amount of defoliation every so often. I am trying not to take too much off at once to limit stress. After seeing how the plant did with topping, i think just bending (LST) branches will have similar results so i dont think i will top again. Scrog net will be on once it gets a little taller so i can really spread her out. Super bushy. Both plants. I feel bad for the one left in a small pot in the corner. I really like how it performed during veg so i might take clones of it a bit more than the main girl. A lot of bending an tucking almost daily. I think i will step up defoliation once the scrog goes on in a week or 2. I am trying to fight impatience but i cannot wait to see what the girls look like in flower. temps stable at high 70s tp 81 or 82F. Humidity i am keeping at mid/high 60s. 30Gal pot doesnt need much watering after the first correction or the last feeding i just did. the smaller potted plant i water once dry (every other day or 2).

All fine, stretch nearly done, DLI was increased to 30, fertilizer changed mid week.

Que pasa familia, vamos con la cuarta semana de floración de estas Black muffin F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros y el trasplante se realizó correctamente. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Las jodidas han estirado bastante, ya veremos que ocurre como va todo. Hasta aquí todo, Buenos humos 💨💨💨

Just water with PH 6.0 untill harvest day.

Welcome to GhostGrow Chapter One by PoshGrow! 🌳 Week #6 3rd week of flowering. Somehow didnt documented alot of this week and next one in vids or pics... Need to smoke less i guess 🤦‍♂️😆 Scrog works perfect, abit lose, but manageable. If you wonder about my home made scrog net, its made from 18mm hot water pvc tube, some screws and rope 😅 Watering when needed, every other watering I used Fox Farm Big Bloom, Grow Big & Tiger Bloom.

Today I submerged it in water for several hours. In the evening I will transfer it to a paper towel

Tutti hanno una piantina preferita, questa è la mia 😎

Light is at max. Need to top dress sometime this week and add some flower nutes let them start flowering soon, can’t afford to much more hight if they are gonna double. Things are as they should be! Happy growing!

-

2024-08-24 Very good Conditions Outdoors, Its warm/hot and sunny in the daytime, in the Nights its already kinda like autumn- cold but dry so absoltely perfect for the Girls One Plant moved under a Roof and into a SCROG they are drinking arund 2-3 liters ( sitting only in 15l Growbags The outdoor Girl behaves like growing in ground, spectacular and she builds lovely Floweringsites i think 3 more Weeks and she can be harvested in my garden standing 2 Tangerine Snow Plants One was growing Indoors, and was already harvested, and is revegetationg now and it looks promising The other Plant was the most Time of her life Outdoors, and is in flower for week 2 now ( almost week 3 because . the outdoor lady drinks and eats a lot She sits in a 15l Smartpot, and drinks around 5liters per day ( i have to give her water twice a Day because its quite hot. shes around 160 cm tall and shows already lovely buds ( entering week 3 of flower) i need to get more of these Genetics for next year, shes one of my favourite Genetics but thats what i tell every week to me the perfect plant. BREEDER INFO Tangerine Snow F1 Fast Feminised is a 75% sativa, four-way cross of (Boost x Tangelo) with (Lavender x Power Plant). This Fast F1 hybrid is bred from Cali genetics and boasts great citrus terps, high resin production for extracts, high levels of THC, very good yields and excellent mould resistance. Tangerine Snow F1 Fast can be grown indoors as well as outdoors. Indoor flowering times are between 8 - 10 weeks while harvest time in northern latitudes is during September while in the southern hemisphere growers will be harvesting during March. Recommended climate regions are hot, dry, humid and warm. These are tall, semi-branched plants that grow in excess of 200cm and display a high degree of vigour with very good uniformity. In common with many other heavily sativa-dominant strains, Tangerine Snow F1 Fast offers excellent resistance to mould as well as to plant pests and diseases. The combination of citrus terps and plenty of resin makes thi a very good extract strain with the 'washing' method delivering very good yields of hash. The citrus terpene profile is reminiscent of mandarins and tangerines and also has sweet candy notes. THC production has been lab-verified at a strong 24% while CBD is low. The effect is uplifting and energising, perfect for use during the day and early evening.