we are entering the 3rd week of flowering. she looks healthy and continues to feel well. the buds are getting thicker and thicker. this week she was given a homemade fertiliser made from aquafaber, coffee grounds and bannan peel. she really liked it. and in addition to the biobizz fertiliser schedule, she is given biobizz topmax once a week.💪😋 i did a bit of lollipopping.

Hola, buenas humos para todos, ya estamos de vueltas con nuevas actualizaciones 😊🍁 Las plantas siguen creciendo muy bien y estamos esperando a que alcancen un poco más de tamaño antes de pasarlas a floración.🌱 También hemos aumentado el riego hasta 450, ya que hemos visto que cada dos días nos estaban pidiendo agua. Además, hemos incrementado un poco los nutrientes para acompañar el crecimiento y las necesidades actuales de las plantas. El pH lo seguimos manteniendo estable en 6.0. Estamos muy contentos con el proceso. Nos ha costado un poco mantenerlas y conseguir que llegaran hasta este punto, así que es muy gratificante ver cómo están creciendo sanas y evolucionando tan bien. Os mandamos un saludo y estamos deseando volver la semana que viene para seguir contando como van nuestras plantas. 💨💀🌱

Screenshot😩🔝

These ladies are really starting to stretch their limbs. I have reduced the indoor light to 17.5 hours and will continue to reduce the light 1/2 hour every ten days to match the 16 hour day on June 20th when I have scheduled to put them outside for good. On warm days here I try to get them outside in the sunlight as much as possible. They are busy and beautiful.

Day 43 - First day of week 7 today and she looks really good just not sure if she’s really starting to flower yet. I’m hoping this is just typical of the GC strain. Day 44 - No major changes, she’s growing and I’m loving the looks of her. Will continue uploading daily pictures. Day 45 - She’s looking really good and budding more and more each day. Gave her straight pH’d water today and tomorrow and will give her another feeding on Saturday. She’s drinking almost a gallon of water a day. Day 46 - Things are looking good with this girl. Bud sites are growing daily and this thing is a beauty. Gave her another feeding of just pH’d water and will “feed” her tomorrow. Day 47 - ALL is looking good and she’s looking purdy. Gave her a feeding with the foxfarm nutes today. Did a true measurement to the biggest branch and she’s at 25.5”. Will continue to measure each day to see how much she’s growing in a 24 hour period. Day 48 - Looking gorgeous and still stretching. Grew another two inches and is sitting at 27.5” right now. She’s really starting to fill in now and looking forward to the next few weeks. Day 49 - The way thing thing is growing, she’s gonna be a beast. Gave her straight pH’d water tonight and will give her a feeding tomorrow. Looks like she finally stopped stretching, sitting at 27.5” still so hopefully she’ll start putting on the weight.

Soooo I chopped the cripple a week before and got 40G dry out of it. Im excited how much the bigger one will yield cause shes looking better and better with every day passing.

This outside AK Auto is doing extremely well in the eastern Canada climate gotten a little rain but lots of hight heat and humidity. Very healthy girl no stress

Cut a few of the colas off to dry,alot of the tops are done and now just focusing on the bottom buds to ripen and turn amber :) Had a smoke today of the tallest cola,smokes great and haven't been this high in a long time so impressed with her !

Ich hasse es wie die Pest, schlimmste was es auf der Welt gibt, Harvest… 😭 3 Tage meines Lebens schon in die kacke versenkt… denke für die nächsten Ernten wird eine Trimm Maschine angeschafft

At the end of week 3 I topped one of the strawberry cough they are all looking good and starting to veg I’m all caught up with the grow diary’s and will add at the end of every week. I’m in Australia and did start a little late into the season but hope to get a decent grow in they will be at my brothers once transplanted and he has a few aswel that I will add into the grow log nothing but sun and water only use a little thrive that’s from Bunnings that I get from my pops shed. They will be in a nicer cleaner soil when transplanted into veggie beds and will have chicken poo as a nutrient source first time ever using chicken poo so see how it goes. Will keep the grow log updated and hopefully everything goes all well for the travel and transplant for the plants in the next few days

Für das unsere Pflanze, schon einige Tobolenzen hintersich hat, wächst sie gut. Unsere Pflanze hat einen Hagelschaden, leichter Schimmel an beiden Hauptstämmen(nass-kalt-Regenwoche) und 300 km Umzug in Wickefolie liegend im kleinen Peugeot 208 mitgemacht. Den Schimmel konnten wir mit einer 4 Tageskur (Brottrunk/Bio) stoppen. Seit dem in der Spitze kaum Unterdruck in den Sonnensegelblättern. Zusätzlich starke Trocken und anhaltende Nass Periode erschwerte das Analysieren des Problems. Durch ausmärzverfahren, angefangen mit reduziertem Gießen/ Normales Gießen und mehr Gießen und beachten des verhaltens darauf, haben wir uns so in den Wurzelbereich gearbeitet. Somit Umgetopft von 20 in 50 l Gut Gedüngt ca. 80 % des Schedule Schema BioBizz WK 3 Zusätzlich 2 x die Woche Mikrobe bzw. gedüngt, nen pfiff Juice und 0,06g CO2 in Pulverform (Tablette) Ansonsten wässern wir im Moment (Heaven, Acti_Vera/ Cal/MG)

Hallo und Herzlich willkommen zu meinem neuen Grow mit der Forbidden Runtz double XL Automatic von Grower's Choice. Diese schreiben: "Eine Kreuzung zwischen „Forbidden Fruit“ und „Runtz“. Eine Sorte von Growerschoice mit sehr hohem Terpengehalt. Die Aromen waren das Wichtigste bei der Auswahl und Kreuzung dieser Genetik". Sehr süss und fruchtig soll sie sein, ganz genau mein Fall. Die URL findet ihr hier: https://www.growerschoice.nl/de/feminisierte-selbstbluhende-hanfsamen/forbidden-runtz-xl-auto.html#additional Tag 24: Die Forbidden Runtz double XL Automatic von Grower's Choice bekommt kleine Seitenäste. Tag 25: 1,0 Liter Wasser. Tag 26: Die Forbidden Runtz double XL Automatic von Grower's Choice wächst etwa 1 cm pro Tag und bekommt etwas LST. Tag 27: 1,0 Liter Wasser. Tag 28: Noch etwas LST. Tag 30: 1,0 Liter Wasser. Schön, dass du dir den Grow angesehen hast. Bleib neugierig 👋😎

Light intensity was increased to around 1000 PPFD under stable conditions.☀️ Temperature stayed at ~25°C with ~50% RH. Both plants remained in their 20L final pots. Watering was done every 2–3 days, based on pot weight, using RO water + CalMag.💧 Additionally, the plants received 1x BioTabs Bio PK during this week. By the end of Week 6, the stretch was basically finished.🌿 Apricot #2 remained the tallest plant in the tent. Apricot #1 stayed more compact but looked overall better structured and more balanced. Bud sites were clearly forming, though still relatively small at this stage. A large number of pistils were visible, showing that the plants had fully transitioned into flower. 🌸 The first trichomes were already noticeable, but aroma was still subtle. Leaf color remained a healthy green, and overall plant health looked stable and strong.

D9 - 9.21 - Just growing growing growing. All of them have nice velvety roots lining the bottom of the cups 💪😬 D10 - 9.22 - Super impressed by the growth and color of these ladies D13 - 9.25 - Transplanted into my 5 Gallon fabric pots with 1/3 Nature's Living Soil Super soil mix on bottom and fox farms on top ------------ Right now these are under 250w (True watts) of LED. One of the lights is a "600w" Phlizon full spectrum, the other is a "600w" YGrow for a mixture of 2-peak blurple and 3500k, respectively D14 - 9.26 - Loving their new pots and tent space! 👽👍

Week 3

9/22 topped them at 4th node. some of them are looking better for mainlining that others. some of them i may not mainline and others i left an extra node in case i want to keep clones around. #1 is looking happy with the topping and looks really good. #2 is the only one thats been praying and is the tallest and strongest looking all around. #5 short and such tight internodal spacing that it makes it hard to see whats all there. just looks like a bunch of small leaves until they grow out. i may not mainline this one either be cause of it being so tightly packed it may make it 9/27/24 day 20 theyre growing quite well. #1 i ended up taking the bottom nodes. i was originally goi g to use them as clones later on but decided to just let her go with her 4 nodes. #5 is so tightly packed, she has like 8 mains all in such a small space, its hard to even make sense of it all.

It's been 74 days of flower now and they only got another week left. A few of the girls were acting up so they were put into dark solitary confinement for 24 hours🤣🤣🤣🤣 bad girls... I have been flushing them for 2 weeks now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. One was chopped last week and is trimmed up and curing in jars now. Looks and smells good👍... The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

The CBD has now fully recovered from her water logging adventure. The new leafs look very healthy and no signs of stress from the topping. I have to fix the ScrOG rack as the heat in the greenhouse caused the 3D printer clips (that hold the stand in place) to expand and loosen. Probably some binding wire will do the trick. Until I find a solution for the ScrOG rack, I applied an LST clip to the main branch. This will keep her from growing vertically too much. The next day the main branch was already pointing up. I attached some binding wire to keep the top horizontal and give the side branches a chance to grow taller. I bought some new clamps to keep the scrog rack in place. More on this in the next few days!