Likes
Comments
Share
Day 43 Just added another circulation fan a 7’ as I realistically won’t be getting my humidity under 50% come late flowering it’ll be more between 50-60% at lights out so got to keep her moving about. Upped bloom again when fed yesterday. Day 48 Gave her another feed today upped the nutes again
Likes
5
Share
🌱: Topping on day 13 💧 : 5l 💡 : Dli: 35 mol/m²/d 🤔: Switch to Spider Farmer equipment on day 13
Likes
30
Share
@valiotoro
Follow
Hello everyone week 3 of flower has passed for this Skywalker haze auto 💥 Mars hydro SP-6500 75% Same feeding schedule have a great day and wish you all happy growing 😎👨‍🌾🏻
Processing
Likes
7
Share
@Kushizlez
Follow
Day 24-31 (Day 25) The smell in here is absolutely ridiculous. My last grow didn’t smell even close to this bad in early flower. (Day 27) Stretch is finally all done. #6 in the back is very stout and barely stretched compared to everything else. I doubt it will yield much but I’m excited to see the nice tight colas on it. It seems to be still getting adequate light and raising it up is hard to do with a scrog net so I will just leave it. If it wasn’t getting enough light it would be stretching right? The early frost is really shocking to me. My last indoor round definitely wasn’t this caked and I’ve never had an outdoor plant on this level either. That’s also true in terms of smell too. (Day 29) I’m still debating whether I should feed anything in flower or just leave it. The only deficiency I’m seeing is purple stems from P def which could actually just be from light intensity rather than a lack of P. I’ve done some thinking and I’ve decided to only feed my small plant. What I’m most curious about is if a PK boost will actually make any kind of a difference in flower when it comes to bud size and smokability. So to test this theory I will be top dressing a teaspoon of 0-18-0 bat guano, a tablespoon of 1-4-2 Destiny launch and a half strength watering of 0-0-15 kelp extract. I’m trying to avoid N all together as I just toxed my guinea pig plants with another experimental flowering PK boost that had a very small amount of N in it. This plant in particular actually has very early signs of N def and probably will fade harder than the rest. (Day 31) Shit. Looks like #1 is starting to herm. It’s definitely not environment or light leaks so maybe it’s just genetic or the recent leaching stressed it out too much. Either way, it’s only a single lower branch and I’m prepared to cut her down if I start seeing anymore. I double checked every other budsite but couldn’t find anymore. In my experience true herms usually start pushing bananas out of the main tops and plants like mine can usually be salvaged with little to no seeded bud. But then again it’s day 31, when these things usually start to happen. I’m 50/50 on this one. I will be watching it everyday like a hawk if anymore show up. The breeder I’m using, ‘Jordan of the Island’s’ is notorious for having unstable genetics and this will be the last time I run any of his stuff. The quality is good, certainly better than most European and Dutch genetics I’ve run but I know I could do better where genetics are concerned. I can’t wait to start hunting my archive dosidos x gelato 41 and in house sugarcane.
Likes
5
Share
Disconnecting controller cones in handy
Likes
17
Share
Hi there!😀 Week thirteen One more diarie specialy harvest for christmas 2019,we’re getting ready for it😜 Joyeux Noël 2019, enjoyed XmasVID😍😍😍 👉Please, Don't forget to Like this RQS AK Automatic👽😎 If you like Hemp "Click" Hemp Symbol below 👇👽😎 Hooray! Best regards GD
Likes
21
Share
Aug 10: this scrog is looking okay. Likely will avoid doing it this way in future, but it will work out. Aug 11/13: don’t take flash pics of your plants unless you’re also immediately using a 730 nm light as a bloom booster. A bright light at that wavelength converts the hormone and allows the plant to go into dark mode two hours faster. Anyway, the red light cancels out the flash from the pics which is cool because buds look good in flash pics.
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Likes
17
Share
I grew two plants and they couldn't have been and more different from each other. One plant grew quite well in my organic amended soil, the other suffered from pH issues and did not like any kind of stress. The plants leaves grew quite different some were webbed especially the ones on the larger flowers. The structure of the flowers on this plant are very chunky fox tail with absolutely gigantic caylex', almost had me thinking seeds. This plant also took almost 3 more weeks in flower than her sister. This plant also had a nice fade with some pink,red,violet,gold colors coming through. Both plant have similar smell with one being a little more pungent and gassy. Now for the normal plant, she grew like a rock star. Hey flowers are covered in sugar and are top shelf dense. She was too down about two weeks ago and is in jars and curing, let me say this though"when Barney's Farm says to use caution they mean it". This plant produced some very strong medicine so much so that I may have found a strain I would grow continually for a year or so. It's that good IMO. The plant did not give me a single bit of fuss 🤗, unlike her sister. Now I have the remaining plant hung up to dry and trim. Can't wait Cheers!!!
Likes
21
Share
@w33dhawk
Follow
Moin moin liebe Leute erstmal Entschuldigung das ich Woche 8 nicht hoch geladen habe, hab einfach den Kopf zu voll zur Zeit der grow läuft an sich ganz gut alle 2 Tage muss ich die Arme der okto moms neu anpassen mit der Höhe damit die Äste einiger maßen auf gleicher Höhe bleiben. Hab zusätzlich heraus gefunden was die Flecken auf den blättern verursacht ich hab die ganze zeit extract und bat boost gleichzeitig genutzt dabei werden die Zusätze getrennt benutzt (ich depp wieder) extract für vegi phase und in blüte umstellen auf bat boost naja die okto moms leben und gedeihen werde die tage auch auf 12/12 licht plan umstellen und somit ist dann auch die Hälfte des grows schon wieder rum euch noch ein schönen Sonntag meine homies und growmies
Likes
13
Share
@JoeyGonz
Follow
Just did last light defoliation.. she is bursting with trichomes .. lighting and video don’t do them justice... pics you can see little better
Likes
Comments
Share
@Ninjabuds
Follow
Decent little plant the ELUFAH Nhi-6500 did great
Likes
52
Share
@Pr3m_85
Follow
▪️︎02/26/21 (Day 8) : started a new week ! ✌️🏼 ▪️︎02/28/21 (Day 10) : the leaves appear to be healthy. Flowering intensifies ! ▪️︎03/01/21 (Day 11) : photo caption : #BR = Bubble Runtz #TP = Tropical Punch #WC = Wedding Cake #FT = Fruit Tartare #KC = Kosher Cookie ▪️︎ 03/03/21 (Day 13) : #Fruit Tartare started to show her precious treasure smelling more and more pineapple 🍍🍍🍍!
Processing
Likes
3
Share
Every week I watch my girls grow into beautiful budding trees only difference is now she in flowering I take her outside to absorb some of the beautiful sunshine and she's loving every bit of it. I let her stay outside for 8 hours in nature then back inside for another 8 hours of led full spectrum and turn out my lights for another 8 hr she's an Auto so she loving every minute of this ...... this is the results ⬆️
Likes
50
Share
@ClubRiot
Follow
Start week 4 , Bio Grow 2 ml/L + Cal-Mag Xtra 2 ml/L ( Ph 6.6).
Likes
8
Share
@lasonda
Follow
Harvest day! I left it without light for 48 hours. The buds are full of resin and very fragrant. Now I just have to wait to taste them, the hardest part. 😊🍀💪🌴
Likes
50
Share
@Hou_Stone
Follow
Photo taken on day 68 / Flowering 35 ------------------------------------------------------------ 💧Watering On average I water each pot with: Day 64 : 1 Liter Day 67 : 1.5 Liter with Bio Enhancer I add Bioenhancer once every 14 days +/-. with 1 gram per liter I add very few nutrients to my water because I have already placed Bio Nutrients directly in my soil 😉 (BioGrow & BioBloom added on week 1 & 5) ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 21-24°C (Humidity : 55-70%) Night : 16-19°C ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Lamp Led 300W : power 95% at 40cm Extractor+ carbon filter ON 24/24h 2 fans ON 12/24h ------------------------------------------------------------ 📜Links : Nori Cake seeds 🌱 : https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/nori-cake/ Food for your plants 🔥🔥👍 https://www.greenhousefeeding.com/ 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Thanks for your visit💚☮️
Likes
11
Share
17/04: - Started LST. - My plan is to wait until the plant outgrows the top tie and start tying the main cola around the pot, counter clockwise. 19/04: - Adjusted LST and tucked some leaves. I'm trying to give the new growth as much exposure to light as possible. 20/04: - 420 is here and the plant is looking fantastic. I'm leaving the LST ties as they are for now. 21/04: - Tensed the main tie a bit more and I might settle for this instead of going with the round shape I had in mind. - I'm tying some leaves so they won't block the new growth. Learned this reading other people's Q&As - Keeping leaves to a safe distance from the soil so they are not damaged by fertilizers.
Likes
5
Share
Method Steps 1. Get all materials set out and prepared 2. Pre-Freeze all tools 3. Add Bubble Hash bags 4. Mix ice + water into a 5g bucket 5. Mix the water and add fresh frozen trim 6. Mix for 15m 7. Let mixture rest for 10m 8. Filter each Hash bag out 9. Begin collecting hash at 120 microns 10. Scoop hash onto a 25 micron sheet + press water out
Processing
Likes
3
Share
Buena semana para estas nenas,creciendo de manera impresionante y con unas buenos brazos, teniendo algunos problemas con las hojas, resuelta que el humificador el agua no era purificada lo que implicó que las hojas de las niñas se estaba llenando de mucho calcio que no la dejaba respirar bien, trate de quitarle las manchas y quedo peor, pero de todo se aprende, cambie el 💧 a agua purificada y listo aunque algunas quedaron manchadas 🔮del resto quedando hermosas muy sanas y con tallos muy fuertes 🌾seguiré informando como van estas nenas 🍃
Likes
45
Share
@wolfvb
Follow
Harvest Update: Dark Lemonade Auto - Trimmed, Dried, and Jar Bound! 🍋? Let's get it rolling! What is up, GrowDiaries fam? The drying phase is officially complete for the Dark Lemonade Auto, and after a meticulous hand-trimming session, she is perfectly manicured and ready for the long cure! 📈 The Details / Harvest Report: The Final Trim: She dried beautifully and maintained incredible density. You can see the freshly manicured nugs resting in the metal bowl, completely stripped of their remaining fan and sugar leaves. Top-Tier Bag Appeal: The macro shots holding the nugs with the black nitrile gloves show off her stunning final form. The color palette is a gorgeous mix of deep greens, dark purple/black hues, and thick, vibrant orange pistils wrapping around the swollen calyxes. Resin Preservation: Zooming all the way you can see exactly how well the trichomes survived the drying and trimming process. She is absolutely caked in a thick layer of frosty, sticky resin heads, promising a potent and incredibly flavorful smoke. ❄️ 💧 Next Steps: It is time to load these beautiful colas into airtight glass jars. We are going to lock in those sharp, sweet citrus notes with a slow, controlled cure. I will be burping the jars daily to dial in the internal humidity and let that terpene profile fully mature over the next few weeks before doing a proper smoke test. 👇 Question for the community: When you are sealing your harvest into jars for the cure, do you rely strictly on burping alongside mini hygrometers, or do you automatically toss in two-way humidity packs (like Boveda or Boost) right from day one? Let me know your curing secrets below! She looks absolutely fire! Let's get these jars sealed up! 🌱💨