Likes
Comments
Share
@GrowTF
Follow
habe an Tag 40 das Licht von 18/6 auf 12 um gestellt und dann angefangen NoVamax Grow und Novamax Bloom nach dem Düngeschema dosiert. Wasser wechsel alle 1-2 Wochen EC und PH wert jeden Tag gemessen und angepasst.( Düngeschema)
Likes
17
Share
Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.
Likes
2
Share
@GorkedOut
Follow
Week 10. I am still trying to get the ladies back on track, as my Ph meter was off a bit. I re calibrated and they should be good to go from here on out. The toads are starting to pack on weight and when I open up the tent it smells very tropical. Super frosty christmas tree structure. RH is around 50-52%. Temps around 73-78 F. Lights cranked up to 70-75% (500ish true watts) They're hungry and I'll feed them good.
Likes
12
Share
The ladies light schedule was changed to 12/12 on Oct.30!❤️ The girls were doing great about 1 week after their big defoliation and SCROG being put in, I decided to flip to flower. I had been tucking and bending and had achieved about 80-90% canopy coverage, the last bit should fill in this week as they begin to stretch. During the 1st week of flower transition, I continued to tuck and bend where I could, trying to maintain an even canopy of tops, as well as fill in as many of the squares, as evenly as I can. It becomes a morning and night routine, I check on my humidifier, say good morning, and tuck away for about 5 minutes or so, it doesn’t take much at this point. Once the first week of stretch is through, I stop tucking branches and allow the tops to continue to grow upwards. I find that by using a SCROG method, there isn’t really a whole lot to do…I don’t defoliate until week 3, so it’s just feeding every 3-4 days and filling my humidifier! When I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️
Likes
13
Share
Hello Diary, We have reached the end of the third week of vegetation, which is also the beginning of flowering. Titan F1 started to form flowers which is normal for automatics after 3 weeks of vegetation. Titan F1 has grown really nicely, it is developing nicely, it grew another 10 cm in a week and got a lot of new leaves. I started to feel a slight smell, which also makes me happy :). This week I also did minimal defoliation on all three plants on the Farm, I removed only the lowest leaves to make it easier to water and improve the air flow through the plant itself. When it comes to watering, it is not frequent, about every 4 days. This week I added one tablet of Easy grow booster. The conditions on the farm are excellent I would say, the temperature is around 26 degrees while the humidity is around 50%. Here's how it looked this week. 16/05/2023 - Day 17. Watering. I prepared 7 liters of water, lowered the pH. to 6.0 and dissolved one Easy Grow tablet and with that amount of water I watered all three plants equally. 19/05/2023 - Day 20. First, I did a minimal defoliation, removing only the bottom leaves to make watering easier and improve air flow through the plant a bit. After that I watered all three plants. 20/05/2023 - Day 21. Measuring the height of the plants and taking photos at the end of the third week. Titan F1 - 36 cm. That's all for this week, see you soon. Thank you all for your support and comments.
Likes
3
Share
@zenderman
Follow
9/6/26 beginning second week(day 8)of flowering stage. 10/6/26-watered with CANNA TERRA FLORES,BIG BUD,CAL-MAG XTRA and BUD CANDY.
Likes
15
Share
@Roberts
Follow
She grew well for the little time I spent with her. She grew fast as upping my room temps a few degrees sped the process up. She has a good smell and I will be back to update on a smoke report in a few months once it is dried, cured, and trimmed. Thank you, Medic Grow, and ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
7
Share
@Meksi2790
Follow
nice and clean down below so the energy can focus on the top maintaining the same temperatures will start lowering next week to start bringing out the purple
Likes
64
Share
- The trichomes photos have been taken just before the harvest. - Drying was made at 20°C and around 51% of humidity (4 days). - Curing done with humidity in jar between 60-61%, temperature around 21°C (2 weeks). Veg time : 46 days Flowering time : 56 days Total time from seed to harvest : 106 days Height : 76cm Pot size : 26l
Likes
23
Share
@Sators
Follow
🌱Day 50.💚 🌱Day 52.💚 🌱Day 54.💚 🌱Day 56.💚 Keep watering with ph balanced, plain water.
Likes
11
Share
@Tagadatek
Follow
Trés compact pour le moment . Devrais prendre en taille pendant la flo
Likes
5
Share
So far so good. Btw the are naturally became healthy after moving in country side with bunch of friendly biocontrol insects. The environment is also perfect. She grow so fast
Likes
Comments
Share
Flush - 5 day dry-back straight into harvest / Skunky
Likes
6
Share
Just been playing about with a DIY co2 generator with sugar water and yeast considering paying out for a better system and meter but at least I can still monitor to a degree but I don't think this co2 meter is up to much cop...... I've made a co2 bucket with an air pump still using sugar yeast 2x tomatoes and a potatoe puree'd 1x teaspoon active brewers yeast and 2.5 liters of water in a 5l bucket with sealed lid ratchet strapped shut sat on a 20cm square heat mat set on a thermostat at 24c to 27c temps sits about 26c for a prolonged co2 release levels have defo increased spiked quite high then settled approx 1200 to 1500ppm or the meter is wank but either way its adding co2 just for how long though ? I've read up on the fungus method which last 6months so I'll be sorting that soon
Likes
21
Share
@Jennison
Follow
Day 8, 9-18-24: they're seeming to shoot up rather quickly and that's wonderful! I can't wait Day 10, 9-20-24: They are starting to look like they're supposed to instead of babies! I got them level with each other so the ppfd should be more uniform. It's rained a couple of days this week so the humidity jumped some, but mostly everything is good Day 11, 9-21-24: they are doing amazing. They are starting to spread out nicely! Day 12, 9-22-24: They are really doing well! I had time to set up the camera this morning before work. That's a 4th gen purple star killer clone next to it. Day 13, 9-23-24: they keep getting noticeably bigger! Day 14, 9-24-24: they're growing nicely and starting to branch out. They have also grown pretty thick
Likes
88
Share
@Roberts
Follow
Gorilla Jealousy F1 has been growing good. I dud hst the tops today. Along with some more lollipopping, and some light defoliation on top. I didn't want to do much more as all of this was stressful combined. She is starting to shift more into a blooming stage now. The stretching should be close to being done. Hopefully everything keeping going good. Thank you Spider Farmer, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
5
Share
Que pasa familia, vamos con la cosecha de estas GG4 Sherbet Fast Flowering, de FastBuds. Por dónde empezar, las flores son bien compactas , y van repletas de resina, tienen tonos por dentro muy bonitos, y tiene un aromas dulces y afrutados. Es muy sencilla de cultivar, es de ciclo corto mdio aunque también si le dais una semana más no pasa nada agradecer se agradece al final. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨