Wir sind voll im Stretch, haben den Dünger langsam über die vorige Woche gesteigert und sind jetzt beim normalen Düngeschema.

Que pasa familia, actualizamos la semana de la farm cheese, la trasplantamos a su maceta definitiva, utilizamos sustrato Plagron. Ph controlado en 6,5 humedad algo baja pero pronto pasaremos a floración, temperatura ideal, el led hace si función y aparte no da calor. Los nutrientes los seguimos echando en dosis muy bajas para que no sobre fertilize. Hasta la semana que viene fumetillas.

Alcapulco Gold plants (3) are between 12”-14” and still receiving only pH balanced H2O. The other 2 strains are receiving nutrients listed above.

We are so close to harvest! The king bud is unbelievably thick and heavy, so much so that I have to use extra straps/rope to hold the plant up, or it will fall. Senescence is hitting this plant hard, since we started tapering down the nutrients we were giving it due to the late Nitrogen toxicity we experienced. Not to worry, though. This is a normal process of the plant growing and (although you won’t see this on many influencer’s grows, is absolutely to be expected). The plant is signaling to us that it is reaching the end of its life cycle and is now pulling nutrients from the leaves and rest of the plant to push further to maximize flower development. We have continued the 10/10/2.5 feeding schedule that we started post-flush, and will sustain that throughout the remainder of the life cycle? Which I only expect to be another 1.5-2 weeks at this point. One interesting quirk I have noticed is that these flowers are turning slightly purple! This is not a phenotype I expected, and certainly not one that was advertised, but i don’t mind.

vuelan

well 2 big plants were sick and i don’t think they are getting recovery.. so i put them aside and let the strong one dominate the light!

This is the first week of the plants being above soil, we did lose one but we are germinating another to replace that. I think the one we lost was due to heat stress, the others are holding up pretty well, there is another one that showed signs of heat stress, we just moved it a little deeper in the tent and it seems to be doing okay.

Me puse a chequear el diario y dos semanas les puse floracion y no lo era. Y por guiarme en eso, pense que estaba demorandose un poco la plantita... No estan tan grande los cogos, pero si super duros, cosa que me encanto. Tiene aroma a caramelo de naranja como lo dije en la otra semana. Ahora se nota mas y le siento cierto olor a gas, pero hermoso. Voy a darle unas 3 semanas o 4, a ver que tanto crece. Quiza el fin de semana vuelvo a regar con el producto, pero despues ya voy a usar solamente agua.

Broke my phone so haven't been able to update but all good now. The soil is peat moss based with added hardwood and banana skin ash to bring the pH up to 6 and bunny buttons mixed in (first time trying rabbit poops) I've also added seaweed . To be sure I don't under feed I've decided to use biobizz , grow , bloom, and top max. I've been keeping the soil damp but not soaked with no run off . The light is at 15000 lux.

Day 63 - Niagara got cut down today, she has a very strong smell & right buds can’t waif to see how she smokes! Will be doing a harvest post once she is dry! I also decided to let the Rock Machine & Doctors choice #1 go another week or two

wowzers!! I think this might be the fattest auto i've ever grown lol well see when the weight comes of course but she has some thiiiiiick colas!!!! Seeing lots of trichs with mostly clear still so I have a feeling another 3-5 days until chop chop!!! she smells amazing!!! have a feeling shes gonna be a really nice smoke 😵

The girls are so big now, I had to do LST again this morning for discretion 😅 Everything ok and thrips are almost gone. The pistils are starting to multiply 😎

Outside *7 inches * Watering every day, sometimes twice *Silica and FloraMicro *Been in the 90's lately * Got a little rain this afternoon Inside * 72° 63%RH * Central air went out yesterday but temps haven't changed yet in the tents *10 inches( bent) * Watering every other day * Retied down *Watered about a half gallon * Fish Plant Food 5-1-1 and CalMag * Took a few lower leaves off

Posting the phenos when I do them

Picking the odd leaf off but it's pretty much just doing its own thing other than having to feed her . She smells really nice with lots of bud sites and has some visable trichome production now .

Placing a dehumidifier or humidifier in the grow box turned out to be ineffective when both devices have their own automated settings. For instance, a humidifier set to 55% humidity works within a ±5% range, meaning it waits until the humidity drops below 50% to turn on and runs until it hits 60%. Since its sensor refreshes every 30 seconds, it might show 54% one moment and jump to 61% the next—not exactly stable at 55%. The dehumidifier behaves similarly. To achieve more consistent results, it’s better to rely on a hygrometer inside the grow box and use “dumb” devices that simply turn on when powered. Connecting these devices to smart outlets provides more precise control. For manual control, I maintained around 55% humidity by turning the humidifier and exhaust fan on and off via phone. Most moisture and aroma are released during the first three days, then taper off. The common rule of “when thin branches snap, it’s dry” led me to overdry my buds. A more reliable method is to monitor the hygrometer. When humidity stabilizes after the initial rise, wait one more day and then jar the buds. Rehydrating Overdried Buds: Overdried buds can be revived with a small piece of mandarin (or orange) peel, about 2.5x2.5 cm. Thoroughly wash the peel (even sanitize it if needed), cut a square, and place it on top of the buds in the jar. In my experience, this brought the humidity from 46% to 62% within 4 hours. Afterward, burp the jars for 15 minutes and monitor the hygrometer. If the humidity drops below 55%, return the peel for a few more hours. Once stable at 60-62%, remove the peel and continue curing, burping the jars twice daily for 15 minutes. As for humidity packs like Integra Boost or Boveda, I used them because I had some lying around. These packs are designed for 12 grams of product, so they don’t make a big difference in larger jars. If you burp jars daily and gently rotate the buds, they’re not really necessary. Trimming and Results: After 7 days of drying, I decided to trim dry this time. It turned out to be somewhat more convenient—everything gets covered in resin anyway, but the remaining leaves easily fall off, speeding up the process. I went for a tight trim, removing as much as possible. During the process, I felt disappointed seeing how little remained on the branches. The buds turned out airy and small, and I started cursing American genetics halfway through the trim. However, when it came to weighing, the results were surprisingly decent. Considering the buds' poor appearance, they’re not going to impress anyone visually, so it might have been easier to shred everything and use it for extraction. I don’t have extraction equipment, so I’ll make cannabutter from the trim, and the buds can rest in jars for now. Takeaways: Use a proper hygrometer for humidity control, not built-in sensors on humidifiers or dehumidifiers. Overdried buds can be easily rehydrated with citrus peel. Daily burping and rotation are sufficient for curing without humidity packs. Dry trimming can be faster and more convenient but may highlight issues with bud density. Despite underwhelming appearance, high resin content makes the strain great for extraction.

Bueno, para no perder a nadie, el sistema que manejo es con dos indoors en paralelo. Uno en flora y otro creciendo la madre. A la madre la hago crecer hasta sacarle esquejes. Luego pasan al otro indoor, la madre y los esquejes, y ahí comienza la floración. Y ahí mismo comienza la nueva madre en el indoor pequeño. La variedad es de un banco argentino que no sé si sigue existiendo. Se llama "kali seeds" y la variedad es superhaze. Que en teoría tiene unas 10 semanas de floración. Día 01. Puse la planta para obligarme a terminar el prototipo. En este caso decidí usar madera de palets y algunas otras cosas que encontré en la calle. Ya casi termino todo, pero me falta armar los cierres. No voy a hacer puertas, dado que no está centrado, así que uso una tela de microfibra que ayuda a opacar mucho y era mas barata que el blackout. Ademas es impermeable y me sirve para un nuevo mecanismo de seguridad para fugas que quiero implementar. Es bastante simple, pero me soluciona mucho. Hoy no hay mucho más que mostrar. Cuando lo haya terminado voy a ir mostrando como va quedando. No me voy a enroscar con los tsp. Voy a poner lo que use aca. Ahora puse un litro de agua con un poco menos de 1g. de Feeding Grow de Greenhouse. Al menos por ahora, ya que tengo que comprar medidores porque los míos ya no dan confianza. Día 4. Ya estoy terminando de acomodar el indoor. Lo forré con refractario e instalé las "puertas" que en realidad son telas tipo blackout, pero mucho más finitas. Me falta terminar de ordenar la electricidad para que cada sector tenga su timer. Van a ser 3 timer diferentes. Por un lado van a ir luces y ventilaciones de flora (12hs). Por otro lado bombas de aire, bomba de agua y probablemente vientos de floración (15 min/hr). Y por último luz y ventilación del modulo de madres (18hs). Hice el cambio del depósito, a uno de 5 litros, ya que los próximos 10 dias pienso intentar mantener la misma solución (mantuve la proporción 1g/L de feeding grow). La planta tuvo un ataque de una plaga que fue a sus primeras hojas. Por suerte en el momento puse tierra de diatomeas y parece haberse detenido. Pero se pueden ver los amarillos en las puntas. No me preocupa, dado que en hidroponia esos problemas se resuelven y la planta se recobra enseguida. Ahora igual habrá que ir monitoreando, dado que me había olvidado de desinfectar el indoor, cosa que hice luego de este ataque. Tengo fé que llegando al mes y medio de crecimiento, ya esté en condiciones de cortar unos esquejes. Día 07. Por el momento el crecimiento viene rápido cómo suele ser en hidroponia. En unos días le voy a estar haciendo el corte apical. La ansiedad me viene ganando, pero sigo con fé. Esta semana tengo que comprar un par de aditivos y medidores que me están faltando. Pero ya está todo encaminado.

Start of week 6 of flowering. Plant 2, survived last week's heat stress and seems to be recovering well. With the new exhaust fan - vivosun 4 inch, 195cfm - my temps have not exceeded 35°c at any time I've spot checked. Hopefully no more issues or setbacks for the rest of this grow.

Really love the smell, one plant yielded about 5oz the other about 3. As far as I can tell the herb from either is as good. Yeah an award winner for sure. Wow what a taste✌️🏻🤤✌️🏻 Update. 2 plants grown, 1 was better but both very good. From the better plant, 5 people to date who I have let sample excellent quality dried and cured buds of Zombie Kush have all reported to me that it’s the best herb they’ve ever tried😉😂😍😍😍😍😍😍 I was smoking it outside a Wailers concert this week also and about 3 people there couldn’t help but compliment on the smell. This stuff really is top quality and I could truly smoke it 24/7