Schönen Sonntag euch 💚 🌿 Wochenupdate Die Woche ist etwas Ruhe eingekehrt =) Alles läuft wieder stabil. Seitdem ich pH+ hinzugezogen habe, ist der Drift wieder voll im Rahmen, und die Damen entwickeln sich zum Glück allesamt weiter. Da es aktuell nicht so viel aus dem Run selbst zu berichten gibt, wollte ich einfach ein paar Dinge teilen, die ich in Zukunft zumindest mit meinem Aufbau anders machen werde =) Fangen wir mit dem 4×4-Cross an 🌿 Auf jeden Fall eine super spannende Geschichte. Es ist wirklich interessant zu beobachten, wie die verschiedenen Genetiken auf das gleiche Environment reagieren und sich zueinander entwickeln 😊 Und sind wir ehrlich, wer hat nicht gerne ein bisschen Auswahl =D Allerdings finde ich, es braucht sehr viel Zeit und Fingerspitzengefühl, einen EC-Bereich zu finden, in dem sich alle gleichzeitig gleich wohl fühlen. Und das, obwohl ich darauf geachtet habe, dass alle von ihrer Entwicklungszeit und dem bekannten EC-Bedarf nicht zu weit auseinanderliegen. Für Single-Reservoirs eher suboptimal, finde ich zumindest 😊 Hier werde ich in Zukunft eher zu 2×2-Cross tendieren und schauen, wie sich das verhält. Der hohe EC hat sich auch echt gut getragen, bis ich ins frühe Bulking geswitcht bin 🔥 Ab da hat mir dann mein weiches Wasser feinstens einen Strich durch die Rechnung gemacht =D Die Kette verlief etwa so, dass insbesondere Notorious mit dem EC deutlich zu kämpfen hatte. Daraufhin habe ich die Lösung – wie immer – berechnet entspannt angepasst. Als ich den Eindruck hatte, dass sie wieder deutlich besser dasteht, habe ich bemerkt, dass ich durch das Verdünnen der Lösung 💧 und meinem weichem Wasser in einen schleichenden pH-Drift gerutscht bin.. Zu der Zeit hat es leider etwas gedauert, pH+ zu beschaffen. Jop auch son Ding hätte man ja vorher wissen können :D :D Letztendlich standen sie Dadurch nach dem Entspannen der Lösung phasenweise in ziemlich niedrigem pH , was wiederum für verlangsamte Aufnahme bzw. teilweise vielleicht auch schon für Lockouts gesorgt hat. Beim nächsten Run wird der EC wieder defensiver gefahren und vor allem mein Wasser direkt von Beginn an gepuffert 💧😊 Sonst bin ich wirklich happy, wie es bis hier lief – es sieht schon wieder alles besser aus =D 🌸 Pflanzenstatus & Training Blueberry Cupcake ist nach wie vor absoluter Performer 🔥Ich glaube, hier hätte man sogar noch mehr pushen können =D Selbst unter den stressigen Bedingungen läuft sie wirklich erstaunlich stabil. Sie hat schön gefrostete Blüten und der Blaubeer-Geruch hat sich etwas gesetzt. Riecht mega lecker – freue mich schon auf den Test 😊 Purpz hat leider doch mehr reagiert, als ich es gehofft habe.. Ich glaube, das war hier am Ende einfach zu viel auf einmal. Sie hängt immer noch etwas nach, und ich habe allgemein den Eindruck sie ist momentan eher entspannt unterwegs 🌱 Ihre Buds gefallen mir trotzdem echt gut – bin gespannt, was hier im Finish noch kommt 😊 Riecht mittlerweile sehr fruchtig. Notorious hat ihre Pause beendet =D Sie legt langsam wieder los.. Allerdings war es hier sichtbar zu viel – erst der hohe EC, dann die pH-Thematik, all on me 🤷‍♂️😅 Ich bin froh, dass sie überhaupt noch weitermacht 💚 und nicht alles mit Nanners verpestet. Dass sie trotzdem langsam, aber sichtbar wieder zurückfindet, fasziniert mich ✨ Bis auf die geschädigten Blätter, die nach und nach abwelken, steht sie aktuell wieder solide da. Guzzlerz macht wie BBCC einen guten Eindruck 😄 Ich hatte eine Nachtphase mit temp-bedingtem VPD-Peak, da hat sie kurz die Blätter hängen lassen 🍃 Sonst gibt es nur Gutes zu berichten =) Schöne Frostbildung nach wie vor, Stacking ist im vollen Gange. Man erkennt es auf den Bildern leider nicht gut, aber ich finde, sie schimmert leicht bläulich 😊 ⚙️ System Jetzt wieder Top-up-Logik weiterfahren 🔄 VPD: 1,20 kPa CO₂: 700–800 ppm EC: 1.500–1.600 µS/cm PPFD: 1.000 µmol/m²/s Vielen Dank mal wieder fürs Lesen 😊🙏 Ich wünsche euch eine schöne Woche 💚 und fette Buds 🔥😄

Over all an amazing grow from day one, Had alot of problems through out the grow but with the help of fellow members of gd I managed to keep her going until the end, Harvest her on day 65 was delighted with the colours and smell of the buds, hang dried in the tent for 5 days, then put in a sealed jar with a humidity pack. I will definetly be growing this strain again but will have a browse through other diaries and see if another strain catches my eye😁 Thank you for all for all the help and support through out✌️🏻😎

Flushing week

Welcome to Flower week 2 of Fast Buds LemonPaya I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo strain Lemonpaya : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 58 Days • Strain Info: 30%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 16l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Day 80 Harvesting was a bit of a trick with this one because I used to Trellis Nets but it went very smoothly no accidents and in the end I ended up with a staggeringly large amount of wet weight. My wet weights have a minimal amount of stock so that they more accurately represent the actual weight of the flower itself. In three days roughly I will be putting in the dry weight and then putting all the flowers into curing. welcome to Day 83 this will be my last update i have now done my final trim and got my dry weight 362.30 gram's !! off one plant. that's 12.77 ounce's i don't sell but my god if i didn't care about laws lol, For a plant thats no cured i will sat it tastes smooth AF and has a nice head high that i didn't really expect from her being that its not cured and didn't really look like she had tones of trichomes. This baby is going to be nice in a month. I'd like to thank everyone that followed this grow and asked questions as always my friends keep your stick on the ice

Week 5 off flowering Buds have grow and are solid with the smell starting to get alot more potent the THC crystals are looking nice Light 11cm from the top of bud Humidity staying around 45-50% Temp 23°c - 26°c Ph 6-6.3 Over all I'm happy with my first grow so far

Humidity this week has still been high, but luckily the dehumidifier was set up last night so hopefully within the next couple days it will be regulated. I LST’d more this week to just try and contain the buds from getting burnt. Clearly I underestimated the size of the tent and should have went bigger. Also defoliated a few of the base leaves and buds as per member comment. They seemed to have taken the stress just fine.

Cut some lower leaves and branches. No smell yet

Getting too tall buds coming nicely now. No real problems but running out of room

Dear friends here it is serious. The two Dark Phoenix are both beautiful and fit, raised high and powerful. The first plant, my favorite, is processed with a topping at 16 peaks that gave balance to the plant really the peaks are all beautiful and upwards, they are taking color. Perfume very much I don't know what, but it's sweet, it seems to me the perfume then there are other neighbors and confused me. It is a highly recommended strain that can do very very well. The second plant is worked with a topping at 16 peaks, but I left two side branches under that they felt the center but they are beautiful and are repeated in full. Wow. I have no words the plants are beautiful and I am very happy. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com

I will b running the SHERBCAKE again to dial her in properly took a lot clones of her so I can’t wait to run her again terps of her is dessert and fuely 🍰⛽️ seeds made by k1 kreationz

This was 2 weeks into flush...only molasses and TPS signal was given; mixed within tap water ph 6.0.

Week 23 november - 29 november 23 november - D1 flower I watered a little too much. as it is colder I will start giving 1.5L of water instead of 2L. this one suffered more than the others and ended up yellowing a little , but slowly it is recovering, I hope ehehe 29 november - D7 flowering

Them father are Gorilla,Red Diesel and another else... i could not remember

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Das war die letzte Woche mit Dünger. Sie erhalten 25 Prozent Rabatt in unserem Shop Mindestbestellwert beträgt 75 Euro https://greenbuzzliquids.com/en/shop/ Code: GD42025 Sie bekommen 20 % Rabatt bei Zamnesia und der Code lautet GROWITGD.

7/17/25 can't wait to flower this genetic. At the begining of August I will be able to start flowering her. Can't forget to clone her beforehand.

Placing a dehumidifier or humidifier in the grow box turned out to be ineffective when both devices have their own automated settings. For instance, a humidifier set to 55% humidity works within a ±5% range, meaning it waits until the humidity drops below 50% to turn on and runs until it hits 60%. Since its sensor refreshes every 30 seconds, it might show 54% one moment and jump to 61% the next—not exactly stable at 55%. The dehumidifier behaves similarly. To achieve more consistent results, it’s better to rely on a hygrometer inside the grow box and use “dumb” devices that simply turn on when powered. Connecting these devices to smart outlets provides more precise control. For manual control, I maintained around 55% humidity by turning the humidifier and exhaust fan on and off via phone. Most moisture and aroma are released during the first three days, then taper off. The common rule of “when thin branches snap, it’s dry” led me to overdry my buds. A more reliable method is to monitor the hygrometer. When humidity stabilizes after the initial rise, wait one more day and then jar the buds. Rehydrating Overdried Buds: Overdried buds can be revived with a small piece of mandarin (or orange) peel, about 2.5x2.5 cm. Thoroughly wash the peel (even sanitize it if needed), cut a square, and place it on top of the buds in the jar. In my experience, this brought the humidity from 46% to 62% within 4 hours. Afterward, burp the jars for 15 minutes and monitor the hygrometer. If the humidity drops below 55%, return the peel for a few more hours. Once stable at 60-62%, remove the peel and continue curing, burping the jars twice daily for 15 minutes. As for humidity packs like Integra Boost or Boveda, I used them because I had some lying around. These packs are designed for 12 grams of product, so they don’t make a big difference in larger jars. If you burp jars daily and gently rotate the buds, they’re not really necessary. Trimming and Results: After 7 days of drying, I decided to trim dry this time. It turned out to be somewhat more convenient—everything gets covered in resin anyway, but the remaining leaves easily fall off, speeding up the process. I went for a tight trim, removing as much as possible. During the process, I felt disappointed seeing how little remained on the branches. The buds turned out airy and small, and I started cursing American genetics halfway through the trim. However, when it came to weighing, the results were surprisingly decent. Considering the buds' poor appearance, they’re not going to impress anyone visually, so it might have been easier to shred everything and use it for extraction. I don’t have extraction equipment, so I’ll make cannabutter from the trim, and the buds can rest in jars for now. Takeaways: Use a proper hygrometer for humidity control, not built-in sensors on humidifiers or dehumidifiers. Overdried buds can be easily rehydrated with citrus peel. Daily burping and rotation are sufficient for curing without humidity packs. Dry trimming can be faster and more convenient but may highlight issues with bud density. Despite underwhelming appearance, high resin content makes the strain great for extraction.

👨‍🌾🏻🍀💚

This one certainly a lot taller than the rest have levelled out best i can by propping the others on boxes to raise them Little bit of late trimming underneath to help airflow and to avoid rot with it being little cramped Happy with plant so far i guess although i would have preferred it to be more like the others bushier and shorter Not too bad overall though cant wait to see things all fatten up in this second half of flower now