Processing
Likes
Comments
Share
@Squidwich
Follow
Background: This is a small grow in a 20" x 36"x 63" tent. Growing 2 sour diesel from seed in coco/perlite medium using General Hydroponic nutrients and primarily following feeding schedule as listed here http://gh.growgh.com/docs/Feedcharts/GH_FloraSeries-DTW_03216am.pdf . I'll be substituting "h3ad formula," i.e. 6 ml GH FloraMicro : 9 ml GH FloraBloom per gallon, for the first 3 rows in the pdf and also be skipping Diamond Nectar, FloraBlend, and FloraNectar. See pic above for nutrient list. Note: Second time attempting to grow this strain. Bud rot destroyed majority of previous grow so this is a redemption grow, hopefully. Lesson learned from previous failure - two circulation fans do not counter high humidity especially for the big buds over 3" wide. On chop day, after vegging for 3 months and flowering for 100 days, the insides of the buds closest to the stems were full of white cotton candy. Couldn't spot it from the outside at all. So lesson learned, and this time end of flower will coincide with low-humidity winter as opposed to the summer. Week 1 - Nutrient regimen: 6 ml GH FloraMicro + 9 ml GH FloraBloom per gallon. Used at 1/3 strength diluted with dechlorinated water. Solution ph'd to 5.8. 9/5/2019 (V1) - Sprouted yesterday and moved under 273 watts of vero 29 LED today, dimmed to lowest setting. Used rapid rooters for germination but would have preferred peat pellets since they stay can stay upright without support. 9/10/2019 (V6) - Fungus gnat larvae infestation! Transplanted to solo cups on 9/6 (V2) using ready mix bag of coco and perlite. Using 1/3 strength "h3ad formula" for first week and fed every other day. Growth appears stunted compared to previous grows and stems needed additional support to stay upright with circulation fan on. Feeding until runoff showed major infestation (see video #1). Can only guess coco mix bag was contaminated, since no adult gnats are visible in tent and yellow sticky card is empty. This has got to be my record for early fuckups! Attempting to treat with neem extract mix (dosed used 5 ml neem oil extract : 500 ml water) and a layer of diatomaceous earth on top (see V6 pic). Hopefully this treatment is better than not doing anything and letting those squirmy baby bastards take over. For a plant this young and without adequate root support this is a gamble. Also bumped up light a bit to 13000 lux as read on Light Meter v3.1 app by Trajkovski Labs using Samsung S6.
Likes
2
Share
@RawCare
Follow
Snowy and smelly. Feeding like mad, love the girl. Petite but resilient
Likes
6
Share
Ok so this is the 2x2 with my fixtures in them the blurples add more par ( I believe) more heat so thought I’d give it a go flowering it seems to be working great so far the Taomatic has started to bloom and stretch since the flip to 12/12 I had two Taomatics but got frustrated with one pheno as it was growing weird and suffered from everything possible so she/he is gone now just the one left so let’s hope she does well 😄anyway not to ramble on the lights combined wattage is as follows:- DIY light=52 watts /Blurple panel light=75 watts / Blurple bulbs= 30 Watts combined there’s 6 bulbs (5w) so total wattage draw from wall is 157 watts which is the same as my mars hydro ts1000 however it cost a hell of a lot less not saying it’s better but you can grow bud on the cheap trust me I started with scrap crap but it works lol happy growing people peace and love ✌️🏾 Oh yeah not sure if this Taomatic is male or female yet but It looks like she might be female any opinions????
Likes
1
Share
@PINUFLA
Follow
Box 100 9 Fotodependientes LED Apolo 4
Likes
19
Share
She's looking thin, not much foliage but the flowers are there, looks a bit like the first time I grew blueberry cheese auto.
Likes
9
Share
@Rizik86
Follow
Day 10 - 2 inches tall seedling. 3rd set of leaves. 4th set emerging from center. PPM 268 2 mL CalMag 4 mL Micro Grow Bloom B52 Voodoo Tarantula Piranha Rhino Skin Sensizym and Bud Candy. Day 12 - Checked PPM 255. First visible roots sticking out from netpot. Plant is green and happy. Added 2 mL CalMag PPM 300. Day 14 - Checked PPM 268. Raised bucket and plant. Light is 26 inches from top of plant. Adjusted light duration to 20 hours on and 4 hours off. Half a dozen roots sticking out from bottom of netpot. 3rd set of leaves have 5 fingers. I believe this means its no longer a seedling. Now entering VEG.
Likes
6
Share
The humidity is loco…the heavy rain continues. My stem is drying out…I’m not sure what is causing it All insights are welcome.
Likes
410
Share
It's been 55 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  
Likes
2
Share
@inversi0n
Follow
Hello growers! Tonns of defoliation and branch management this week. I added 2nd pack of stretching wires I actually don't know how to manage THAT amount of branches Shall we count this stage as a flower or veg. Well, it's transitioning At the beginning of the week PPM was 1040, by the end it's 1700+ It's hard to maintain correct level, when we add water, not changing it, i wanted to add more bloom nutrients. And she dinks well now.
Likes
19
Share
@Wolf47
Follow
Pics are from 1/18-1/24 Girls are still behaving really well!! My “fan leaf” OCD has been kept in check, and am proud of myself!! The only other annoying thing, is that, one plant is almost twice as long, as the other 3!!
Likes
5
Share
Week 3 is coming to an end! Not much done expect watered when dry and kept up the environment. Lots of orange pistils coming through now and she’s starting to smell like some gas!
Likes
3
Share
Great week, plants are ready to be harvested. End of week 9, flushing done. Incredible smell and really nice structure
Likes
1
Share
@Dabcik
Follow
I profumi iniziano a sentirsi forti e ben definiti! Le cime delle happy ending sembrano le più grosse e compatte e resinose al momento. Anche le pink poochie promettono bene. Le zerberry stanno mutando colore sul violaceo
Likes
5
Share
Initiated flower with a 48 hour period of darkness on the 35th day from seed. #SFgrow
Likes
16
Share
Just topped part of this beauties 🔥👌✌️ Put 2ml per l revive by Advanced nutrients I've noticed that helps girls to recover After transplant & topping This accually a week 3 of vegetation cuz i threat first 2-3 like seedling stage After germination stage😁😂🤪
Likes
2
Share
Vamos familia, actualizamos la octava semana de floración de estas NoName de Seedstockers. La temperatura que estuvo entre los 24-25 grados y humedad dentro de los rangos correctos. En cuanto a las plantas pues estas últimas semanas cogimos un poco de trips y pues ahí ando combatiendo con planchas pegajosas de color azul, estiraron bien y ensancharon bastante también. Las flores se están llenas de tricomas estan madurando, aún con la plaga, por el momento todo correcto. Ya estoy regando solo agua, para limpiar las raíces y demás. Hasta aquí todo lo de esta semana , ya queda nada, buenos humos. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
1
Share
Because theyre a little bit slow in growth i consider another 2 weeks before i switch
Likes
7
Share