Likes
2
Share
Good growth, Blueberry powering through cal mag issue. Skywalker will be first to harvest for sure. Insane amount of frost on that plant. Glueberry og continues to require fairly frequent defoliations to open up canopy. Blueberry starting to get some subtle berry coming through.
Likes
23
Share
Day 29 (1/4/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 62°F pH: 5.8 Day 30 (1/5/21) I transplanted all 8 plants today from 0.05gal pots to 1gal pots and watered. The light is 25” away from the plants now but using a lux meter I adjusted the power of my lights to be equal to what it was before. Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 60°F pH: 5.8 Day 31 (1/6/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 60°F pH: 5.8 Day 32 (1/7/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 60°F pH: 5.8 Day 33 (1/8/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 60°F pH: 5.8 Day 34 (1/9/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 60°F pH: 5.8 Day 35 (1/10/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 60°F pH: 5.8
Likes
21
Share
@BLAZED
Follow
Week 14 (2-6 t/m 8-6) 2-6 Temperatuur: 27.1 graden (licht aan) 20.5 graden (licht uit) Luchtvochtigheid: 55% (hoogste) 45% (laagste) Het gaat aardig goed. En wat zijn de shots met de lamp uit en flitser op mobiel aan super mooi! Ik ben ook verliefd geworden op haar geur, ze ruikt zo lekker zoet-zuur! 😍Ik kan niet wachten om haar te testen. Ookal ben ik bang dat ze net wat te veel THC heeft dan ik normaal rook haha, maar dat zien we nog wel. Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium PowderFeeding per liter. EC: 0.6 PH: 6.3 3-6 Temperatuur: 28.8 graden (licht aan) 21.8 graden (licht uit) Luchtvochtigheid: 56% (hoogste) 41% (laagste) Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium PowderFeeding per liter. EC: 0.6 PH: 6.3 4-6 Temperatuur: 29.5 graden (licht aan) 22.7 graden (licht uit) Luchtvochtigheid: 55% (hoogste) 42% (laagste) Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium, 0.6 gr Hybrids en 0.4 gr PK+ PowderFeeding per liter. EC: 1.7 PH: 6.2 5-6 Temperatuur: 29.5 graden (licht aan) 22.4 graden (licht uit) Luchtvochtigheid: 55% (hoogste) 44% (laagste) Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium PowderFeeding per liter. EC: 0.6 PH: 6.2 6-6 Temperatuur: 29.4 graden (licht aan) 21.8 graden (licht uit) Luchtvochtigheid: 55% (hoogste) 43% (laagste) Ik ga vanaf nu om de dag wat PK+ meegeven aangezien ze dat nodig heeft in de bloei, 0.4gr per liter wordt er aangeraden op het schema maar ik doe voorzichtig en geef haar 0.2gr per liter. Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium en 0.2 gr PK+ PowderFeeding per liter. EC: 0.7 PH: 6.3 7-6 Temperatuur: 30.1 graden (licht aan) 23.1 graden (licht uit) Luchtvochtigheid: 56% (hoogste) 45% (laagste) Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium PowderFeeding per liter. EC: 0.6 PH: 6.3 8-6 Temperatuur: 31 graden (licht aan) 23.5 graden (licht uit) Luchtvochtigheid: 58% (hoogste) 45% (laagste) De toppen beginnen voller te worden! Nu nog ongeveer 3 weekjes te gaan. 😁 Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1 gr Calcium en 0.2 gr PK+ PowderFeeding per liter. EC: 0.7 PH: 6.2
Processing
Likes
23
Share
Další týden za námi. Už nehnojim Magnifical. Začíná to řádně smrdet. Ale není nic lepšího než když po probuzení cítíte tento model. Už se moc těším . Sklizeň bych viděl tak 10.2. No uvidíme. Nechci to zakriknout. :) Have nice day. 💚🍀
Likes
Comments
Share
So everything took off in flower, I was super harsh with the defoliating which initially I regretted, but was surprised with how they packed out during the following weeks. In general it's impressive how hardy these plants are. Even the outdoor grows yielded some quality. Add some more nuets (overdrive and carbo load), before flushing about 14 days before harvest, next time I'll do this earlier and really the Runtz could have gone another week but my drying needs to happen in the same space as my growing for now. Apologies for the quality of image, I'm just using my phone and some bits I have to document, I collect records too, so expect weird noises lol. Build a rotating plat from a lazt susan I found, has been the best piece of kit added this season.
Likes
3
Share
@Dabking
Follow
Every video and picture were taken on the same day (113/ week 16). If you look at the bottom branches and colas, the pistils are nearly finished and there aren't many clear pistils left. I have attached microscope photos as well. It is important to check many sites on the plant, as only checking one or two colas may be deceiving as to if the plant is ready to harvest or not. I have taken the lower branch and chopped it about two days ago and will sample it in a few days. I'm excited for this plant to be done soon.
Likes
32
Share
Likes
10
Share
week six flower everything looks great so far :D buds are filling out & terps going crazy!! CherryPie 1: smells fresh like minty CherryPie 2: smells like cherrys very fruity I water them with 1.5l every 48h the light I use was set to 100% and it hangs 80cm away from the tops
Likes
50
Share
@Roberts
Follow
Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
12
Share
The girls are starting to wrap up their cycle. I have been watching the trichomes closely, and we are getting very close
Likes
4
Share
Week 6 for Amnesia Zkittlez by fastbuds She's been outdoors for a week now, not gotten much sun at all. Hoping new week will be better as she's still very skinny for my liking at this point in flower. She needs more leaf to bring energy for those flowers. 😢
Processing
Likes
1
Share
No big changes lately. 2 weeks after last post and seem getting thicker and I see few pistils got darker colour. Buds not very voluminous. Yet they still grow and need few further weeks.
Likes
14
Share
@SUMAN
Follow
Some yellowing leaves not sure if it's it's starting to fade or it's nutrient burn or a ph problem,...🤔I will figure it out...🙄
Likes
3
Share
Likes
15
Share
@Uwish
Follow
Nothing special, everything is actually working. Clearly once my water was at the right temperature, no more worries. The flowers arrived at 12/12 + 11 with the trichromes that pop, it starts to be pleasant! So of course, I'm not going to break any records on this RUN but in any case, I've eliminated a lot of "novelty" and mistakes that I'll make more. I'm counting on the run I'm re-launching to blow all that up, I'm going to go for a performance goal The stretch is off to a good start, it should settle down around 12/12 +21 - 28, so I will place my second net next week. I have done a defoliation. I change the soup in 2 days, so my solution lasts 10 days. I have a slight over-fattening, but really nothing serious, I will switch to an EC of 1.8 - 1.9 instead of 2.0. and I will observe. Here we can see the delay of one of the plants, it's as if I was shooting with only 3 plants. Next time, only one strain, same size of cuttings and passage by cuttings and RDWV DIY mandatory before passage in the V-system. Next week, I change the brand of fertilizer for the RDWC, I go to Athena, I will introduce the PK of Athena which according to their recommendation starts at the 21st day at a rate of 2ML/L. I turn with the base sensi bloom a and b + athena pk Otherwise, I receive the parts this week for my RDWC DIY system for growth, I'll make it with my friend and I'll test it and I'll give you a feedback on the next update, especially since I'm going to restart right away, I'm going to do 10-15 days in cuttings and then I'll go to the RDWC DIY system for growth until I finish the FLO of the V-SYTEM and then I'll go straight to the next one. I'm going to put my LEDS at 80% which is the MAX recommendation of SANlight without c0² ( I don't forbid myself to grow at 100% in week 5-6, I'll see... )
Likes
2
Share
@Hidden
Follow
: - Day 1 week 5: just checking how lst is doing, they will be ok - Day 2 week 5: not completely dry to water so I’ll wait for day 3 of week. Did lst to make sure all branches receive as much ligth as possible - Day 3 week 5: watered them with 4ml/L calmag and 2ml/L bio grow ph 6,5 tap water trough activated carbon filter. RHC#2 broke one of the branches, I had to tape it. Not to be worried, she’ll recover from that. RHC#3 is very slow compared to the others. - Day 4 week 5: defoliation so sun enters better and wait. - Day 5 week 5: added 1L of water with 2ml/L Bio grow, 6 ml/L calmag and 2ml/L bio heaven. 1600 us/cm and ph 6,2 - 6,5. RHC#3 suffered of broken branch due lst 😞 still learning about the flexibility of branches. I think she’ll recover hoping not too much stress for her. - Day 6 week 5: RHC#3 looks good despite broken branch. Not much for today just watch temp and humidity, hoping they grow tall so I can cover a good part of the tent. - Day 7 week 5: water with the usual calmag and biogrow ph 6,3. Defoliated every 3 days or so to keep light enter every branch
Likes
574
Share
@TOTEM
Follow
Quick update just to upload some photos, but unfortunately I don't have many relevant news to report. Leaves are yellowing, but I can't understand if it's senescence or lack of nutrients. Since she's not gonna finish within the next 2 weeks, next week I'll add some nutrients in low dosage, which shouldn't be a problem since the runoff is more or less 250 PPMs. This week there are some videos too! 🎥 Day 136: 9L of tap water (PH 6.5). Runoff: PH 6.8, 256 PPMs. Day 139: 9L of tap water (PH 6.5). Runoff: PH 6.7, 245 PPMs.