Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Chem OG is my first chem and i'm not disappointed at all, would have loved more yield but i vegged her for like 3 weeks so what do you want to do with that, in the end she took 11 full weeks to yield more than a zip dry and cured from each plant so who's got two thumbs and is not complaining. Looking forward to see how they do in the extractors, and tips welcome as always. Hope that you enjoy the vid, if you're in France once day, dont forget to bring some homegrown let's get high folks ! 🚀 Love testing out genetics thank you so much , next round incoming ! 🚀 So this grow clearly a very neat grow, kept right on top of things with VPD, always in the optimal ranges even if i had to manually tinker with the mister , the exhaust, the fans, the lights. Speaking of the lights i applied a "pumping technique" meaning moving the lights up a down : down going into flower, then up then down again towards the end of flower to trigger rippening. The smart proteins were used through out the grow meaning the veg went nuts, started smelling loud right out of seedling stage, then at flower stretch i think it does help give it a kick, mid flower though it makes the trichomes rippen quicker than the plant can put on biomass, meaning you get strong , ripe colas that come out a bit thin. Cut and harvested at 30% amber believe it or not, to me that's late but i couldnt believe it when i noticed the plant was ripe at 10 weeks so i let it go on a bit longer. wet trimmed and dried over 10 days, Jarred and cured for 2 months.
Processing
Likes
Comments
Share
this week was a good week I watch my girl.grow from a seed to a plant and is now starting up.flowering stage she's the shortest out of my 3 plants and I just added one plant to my family didnt wanna be to excited with this one because I lost her twin sister already but her strain is (its 1 day since she popped up)"wedding cake "
Likes
2
Share
Week six. She is probably about ready to flip to flower. I did some defoliation and cut some lower branches to root clones. This thing is bushy as fuuuuu, even after my fan disaster damaging her! I am doing some LST on lower branches and will SCROG as best I can when I flip to flower. She is happy and healthy right now. No issues. Humidity in the tent has been a bit high so I may have to get a dehumidifier in the tent soon. This strain has been putting out the prettiest ridged leaves. Ive been having a blast taking artsy photos of them lol
Likes
19
Share
They look good , and they are on her final Phase!
Likes
8
Share
@CalGonJim
Follow
How RQS Compares to Your Standouts Brothers Grimm (your "otherworldly" stars: Montel Iced Tea, Body Count, Bubbles Blueberry F4, Ricky’s Hash Plant, Black Tangi Tea) These are landrace-influenced, heirloom-style genetics with exceptional resin, unique flavors, and structure. They outperform RQS in quality, potency, and "wow" factor in your tents. RQS tends to be more commercial/hybridized for ease and yield, while Brothers Grimm prioritizes distinctive traits and consistency in experienced hands. Humboldt Seed Company autos (your top autos for resin, especially OG Triploid) Humboldt focuses on West Coast legacy genetics with heavy resin production. Clearly superior to RQS autos in trichome density and overall quality. RQS autos are faster and easier for beginners but often lack the resin "frost" and depth you get from Humboldt. Fast Buds (fast, flavorful, reliable autos — you like them a lot) Excellent speed and flavor profiles. You noted they're in a "different class" — fair point. Fast Buds emphasizes quick cycles and modern hybrids with nice terps, while RQS autos can feel more generic or require more coaxing. Quick Thoughts on Your Observations Brothers Grimm (Montel Iced Tea, Bubbles Blueberry F4, etc.): These are clearly the stars in your current setup. The strong smell, unique leaf morphology, and overall vigor in small pots show they're expressing well under your conditions. They reward careful growing with quality that feels special — resin, flavor complexity, and effects that fit your low-dose, functional style better than most commercial lines. Your homemade cross (Gelato 44 × Bubbles Blueberry F4 pollen = "Blueberry Knockout"): Nice work on your first intentional cross-pollination! Getting viable seeds and decent plants from a garage-level cross is a real win. It’s not "pretend breeding" — it’s exactly how many great lines started. The fact that it turned out "pretty nice" is encouraging. However, as you noted, combining a Royal Queen Seeds Gelato 44 (solid but commercial) with Brothers Grimm Bubbles Blueberry F4 (higher-quality, more unique genetics) creates a hybrid that can show the best of both, but also some inconsistency. If the RQS side brings easier growth but less depth, while the Brothers Grimm side brings the special traits, the offspring can be hit-or-miss depending on which phenos you kept. RQS Gelato 44 / Mike Tyson 2.0 vs. Brothers Grimm: Your experience matches what many growers report. RQS lines are generally more "user-friendly" and higher-yielding for beginners or volume grows, but they often lack the resin density, terpene complexity, and unique expressions you get from Brothers Grimm. The Tyson 2.0 collaboration added hype, but in your tents it landed at 7/10 while Brothers Grimm hit "otherworldly." That gap in quality is why you're leaning toward sticking with the professional, boutique genetics going forward. 3/30 11:17PM Gelato 44 & Punch Pie were nice right off the tree the little buds put me right to sleep last night!! The Autos are 7-10 but the Photos are 8/10
Likes
24
Share
@rucucu94
Follow
Esta enorme, nada mas que agregar. Me olvide de scarle fotos para el diario, pero le saque eso, ya que yo no estoy todos los dias. Se va para arriba ella, esta hermosa
Likes
56
Share
@Aedaone
Follow
The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had a high temperature of 90°F with clear, sunny skies. I watered 2-3 gallons from the hose. Day 2 we had a high temperature of 97°F with mostly sunny skies. It was a scorcher. I watered 2-3 gallons twice today from the hose. Day 3 we had high temperature of 95°, but it felt like 102°. Skies were partly cloudy. I watered 2-3 gallons twice today. Day 4 we had rain the previous night and early morning. We had cloudy skies, with high temperature of 81°F. I did not water today. I added 50ml of blood meal to each pot, spread evenly on top of the soil. Day 5 we had a high temperature of 87°F and mostly sunny skies. I watered 2-3 gallons. Day 6 we had partly cloudy skies and a high temperature of 86°F. I watered 2-3 gallons each pot. Day 7 we had high temperature of 89°F. We had scattered thunderstorms and roughly two hours of rain. No watering today.
Likes
11
Share
He who stops is lost, as an old saying goes I don't know exactly what the origins are, so here's a new Zamnesia season. We are in the middle of winter and despite growing in an area that isn't the warmest in Europe, it's really cold now. It's 16-18 degrees Celsius in the house and we need to bring the temperature of the propagator growbox between 20 and 25 degrees Celsius. So we first placed a layer of those 1 cm thick "rubberized" floors that are used for gyms, they are easily found on Amazon and are very useful for insulation. Then a heated resistance mat and then the closed propagator on top. Inside with our seedlings and the light on at minimum 20% we reached 24 degrees, not bad in fact the germination is proceeding very well. 100% opening of the seeds in water and almost all of them are opening in our biodegradable peat pots. ----- Our Green Crack F1 Hybrid Auto were born really quickly. About 24 hours in water and the two seeds had hatched, another 24 hours in soil, and off they were born on 01/12/2024 on the identity card we have this date. Special features very pretty, born regularly without any problems, if you have placenta problems or seeds that remain attached. read below. Is a Sativa Dominant probably running for Autoflowers World Cup let’see the results. . WARNING: Placenta Problems ---- ALWAYS look very carefully at the seedlings, if the seed or placenta prevents the cotyledon leaves from opening the plant dies after a while. Remove it delicately as if it were a condom or almost. I apologize for the example but it gives the idea to remove slowly delicately please. WARNING: If you choose biodegradable pots choose the largest possible and not paper/cardboard ones, there is peat which is the main component of most of the soil we use. If you want to avoid transmitting vibrations to your neighbors I recommend you install one of these gym floors under your growboxes, I did it and I also feel safer not to disturb. They are easily found on Amazon in different thicknesses, I took a gym model that is assembled like a puzzle, they are also found in children's shops, they are those floors that are assembled to make children play safely, or to train and to avoid vibrations from equipment or of any kind. Everything will be grown Plagron Pro Mix with 100% fertilizers let's start with Power Roots 1 Ml/l Plagron fertilizers are available on Zamnesia in convenient Pack formats for all growing styles. I used this with a simple search you can find the other products. ---- https://www.zamnesia.io/en/12119-plagron-top-grow-box-100-natural.html —— Try this strain drive me crazy! ---- https://www.zamnesia.io/en/10677-zamnesia-seeds-green-crack-f1-automatic.html Zamnesia Description // Forget what you think you know about cannabis. Green Crack F1 Automatic by Zamnesia Seeds is here to shake up the whole industry. Using F1 genetics, growing cannabis has never been easier. These plants offer uniform and abundant yields. Get ready to harvest high-quality buds, full of flavor and amazing effects. Growbox and Air System - Secret Jardin DS120w + fans + Exhaust fans and filters DF16 kit Light - Viparspectra P2000 https://www.viparspectra.com/products/viparspectra%C2%AE-2024-updated-p2000-200w-led-grow-light-with-daisy-chain-function ---- www.zamnesia.com
Likes
16
Share
@GutterHoe
Follow
Good week. Buds are fattening up. Growing like a 1/4" a day!!!! It's getting exciting for my first grow.
Likes
15
Share
The buds look good and smell strong; Mix Two has some monster buds growing. I'm still trying to determine its variety, but I'm leaning towards a Bruce Banner. Looking at the grow overall next week, I will drop the PK13/14 out of the mix, and I'm thinking maybe the week after I start the flush. I've put up a little fly-through video to get a better idea of the grow.
Likes
8
Share
@Raizativa
Follow
Una fumada con toque cítricos, una volada de otro mundo (con moderación), cogollos densos.
Likes
13
Share
Esta semana ha ido muy bien. Su color es muy verde a pesar de la poca cantidad de nitrógeno aportado y lleva un crecimiento muy fuerte a sus flores que ya estan bañándose en tricomas con ese delicioso olor a goma de mascar rosa. Es muy visible el trabajo de Bud Booster sumado a Bud Candy que estan dando un increíble aporte de volumen a sus cogollos. Por suerte no tuve que usar agua de grifo para esta planta que aún está siendo alimentada con agua de lluvia. Irie!
Likes
40
Share
Hallo Tag 55/29 Blüte. Sie lebt! Ich denke der Ertrag wird sich zwischen 1,5-2 kg trocken ergeben. Die Knospen sind jetzt schon so gross wie Tennisbälle. Sämtliche Knospen sind so Klebrig, das mein Insektenproblem beendet ist. Wie Sonnentau fängt sie die Insekten und verdaut sie.
Likes
42
Share
@Miketama
Follow
Harvest week for the Milky Way F1 growmies 🙌 Pretty happy with how she handled this cycle, recycled soil first time ever, dead of winter, undersized light for a 100x100 tent… she just kept going 💪 In previous runs I did scaled harvests, and every time I noticed a visible resin boost and even some anthocyanin production on some phenos, confirmed that a sudden light intensity increase late in flower does something interesting. This time I went a different route: last 6-7 days I stripped most of the non-resinous fan leaves and redirected a lateral bar onto the mid/lower zone to get the same effect. Curious if mechanical stress from defoliation plays a role here too, anyone know anything about jasmonic acid? 🤔 Late flower I pushed the setup to ~200w adding 660nm red bars at 40-50cm, which clearly tightened up the buds compared to previous runs 👀 Pulled the CO2 bottles in flower, without a way to measure it I’d rather focus on VPD and fresh air circulation 🤷 Kept them in veg where humidity tolerance is higher anyway. Now she’s drying and I can’t wait to see how the wet/dry ratio lands 🌿​​​​​​​​​​​​​​​​
Likes
8
Share
5/30 update: both plants have been jarred for curing! A little disappointed with the over all yield but a lot to learn from this first grow! Expert seeds gg#4 comin next 👌0
Likes
15
Share
@Uwish
Follow
With the last heat wave, I had an answer to one of my questions, clearly my chiller is not doing the trick. I have water temperatures that went up to 27°, which is way too much, the plants deprived of oxygen, started to declare several deficiencies due to an assimilation slowed by the lack of oxygen. It is then that a nasty fungus came to say bijour, it is me MR pythium! It was necessary to act, at the risk of having to restart the culture. So I applied hydrogen peroxide and ROOT ROT X, and both products are doing harm to this nasty pythium, things are now back to normal. On the other hand, the plants had a decreased growth for 10 to 15 days, so I'm going to extend my growth for 10 to 20 days, that is to say 1 or 2 soups, I'll choose according to the root development of the plants. Before going to flowering, I have to catch up this delay in order to make a nice crop.
Likes
44
Share
@Jd1971
Follow
Cut down wet weight 721 g :)))))) Bottom half to do in a week or two:)))) will up date all in harvested week first weigh in 165 g :))))
Likes
4
Share