💩Holy Crap We Are Back💩 Well i had so much fun the last round , that we are going at it again 😁 OUTDOOR GROW👈 So super happy to be trying this one out , can't wait😝 .....The hope here is to do better then last summers outdoor grow ..👍 We are just a week in and she's doing great , she's growing well and I'm just waiting for mother nature to do her thing and out she goes 👌 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

Another super terpy tasty baby strain💜 Rockdense buds

6 October 1 nice 1 ok

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Hi guys So start of week 2 now, this week I expect to see some explosive growth on these guys towards the end of this week. I will be adding co2 bags and feeding biobizz root juice. I will add cal mag next week for there nitrogen shoot. Happy growing guys 👌💪💚

I´m still watering with Terralba’s Black Sugar-cane Molasse. In this diary I´m not going to use PK because I want to see the result of applying only terralba product ... so I´ll decide better what I need in the next diary.

I’m going to leave the seedlings in the small brown pots until their 1st node and then I’ll transfer them into bigger plastic 3.5gal pots with 80/20 soil to perlite potting mix. One Dosidos is looking a bit behind and the one with the weird leaves ended up catching up to the Northern Lights, maybe even growing faster than it. All Dosidos’ ended up dying but one and I’m sure it’s on the way out. Northern Lights has had no issues and growing perfect.

One branch got broken after I came back to the room, I wrapped it in rolling papers and scotch, it was not fully broken , looks like started healing. Any advice would be appreciated . Waiting for my lamp for flower. It will be 300+ 450 W leds, I hope it will suffice.

The start of cultivation was not at all favorable at temperatures below 10 degrees then came a storm that caused cracks and tears in the leaves ... The leaves were very dirty from clay and perlite, so I tried to wash them all with a paper tissue. The weather was not at all kind, so I added Advanced Nutrients- B52 vitamins and Rhino Skin to strengthen the stem and leaf I often meet different animals on my way through the forest, today I met a newly born young fallow deer

Defoliated and fully leaf stripped. I am going all out to see what happens. Wedding gelato is a fairly tall plant for my tent and future grows will have to be properly trained and tied down. Live and learn. So far happy with the results from hydro grow. Roots have worked their way into the res so I have added an air bubbler to the submerged roots.

Plant 2 harvested 8.5 weeks from seed to harvest Plant 1 harvested 9 weeks from seed to harvest These ones swelled up and grew at lightning speed compared to the rest... wish that third seed had germinated now ;) I'm putting Ripper Seeds autos up in the top spot for now, 100% - this and Zombie Kush auto grow last year have been huge yields and really fast to grow. They just have these immense top colas (for those who prefer to leave the plant untouched - I don't do anything to my plants, no defoliation, LST, etc. Mostly because I'm really lazy when it comes to these things.

Tag 22: Beide Pflanzen sind schon in die Blüte gegangen. Tag 23: Zeit zum umtopfen! Von 3L auf 6L Topfgröße. Eigentlich wird ja von umtopfen von Automatics abgeraten. Aber ich habe bei meiner letzten Automatic damit erstaunlich gute Erfahrungen gemacht. Das wollte ich nun nochmal testen mit anderen Sorten. Tag 25: getoppt bei 4 Nodien. Tag 27: Ich biege die Zweige täglich

fatto un po di lst,allego un video di un montaggio del allenamento , aumentato a 80% l'intensita della luce, per evitare stretch

🎄 Z-Up Auto („7 Up“, FastBuds) Aktueller Stand (30.10.2026) 🗓️ Alter: ca. 9–10 Wochen ab Keimung 🌿 Vegi-Dauer: ca. 3 Wochen, danach selbstständig in die Blüte gegangen 🌸 Blüte: etwa Blütewoche 7 ? Erde: 7 L, Biobizz Light-Mix mit Wurmhumus, BioTabs, Startrex, Mykorrhiza, Bactrex, Orgatrex 🌲 Training: keines, natürlicher Wuchs in Tannenbaumform 💎 Blüten: Hauptcola lang, dick und kompakt, die Seitentriebe mit kräftigen eigenen Buds, ein großer Teil der Stempel ist schon orange bis rostbraun verfärbt, die Zuckerblätter sind dick mit Harz bedeckt 🍃 Blattfarbe: oben gelbgrün aufhellend, einzelne Zuckerblätter dunkel bis violett, das Ausbleichen zum Blüteende hat begonnen ✅ Gesundheit: keine Schädlinge, kein Schimmel 👍 Bewertung: sehr gut, sie geht auf die Zielgerade 🔮 Ausblick: grob noch 1–2 Wochen, also etwa Mitte November, die Trichome entscheiden 🎄 Die Z-Up biegt auf die Zielgerade ein! Rund neun bis zehn Wochen ist sie jetzt alt und steckt etwa in Blütewoche sieben. ? Seit letzter Woche hat sich die Farbe deutlich verändert: Ein großer Teil der Stempel ist von Weiß auf Orange und Rostbraun umgesprungen. Die Hauptcola steht wie ein dicker Kirchturm in der Mitte, die Seitentriebe drumherum tragen jeweils eigene, kompakte Buds. Auf den Zuckerblättern glitzert das Harz inzwischen so dick, dass sie fast bereift aussehen ✨ 🍂 Oben hellen die Blätter auf und werden gelbgrün, einzelne Zuckerblätter laufen dunkel bis leicht violett an. Das ist kein Grund zur Sorge, sondern der normale Herbst am Ende der Blüte: Die Pflanze zieht ihre letzten Reserven aus dem Laub in die Blüten 🍁 Die Diva bekommt weiter nur Wasser 💧 Keine Schädlinge, kein Schimmel ✅ 🔍 Ab jetzt geht es um die Trichome. Geerntet wird, wenn die meisten milchig sind und die ersten bernsteinfarben werden. FastBuds sagt acht bis neun Wochen ab Keimung, sie lässt sich also ein bisschen mehr Zeit. Ist ja auch eine Diva 👑😅 🏁 Fazit der Woche: sehr gut 👍 Grob noch ein bis zwei Wochen, dann kommt die Schere ✂️ Wenn die Limonade so schmeckt, wie sie jetzt schon aussieht, gibt's im November Sommer im Glas 🥤🍋

G13 is starting to stack. She is growing good in the Athena blended line nutrition, under the Medic Grow Mini Sun-2. I am running a little strong on my solution mix. I will likely do a change in next few days if it keeps showing me signs of too much. It does look like it is getting better though. The plant is just getting bigger, and using it. Nothing else to report this week. Thank you Medic Grow, Athena, and Weed Seeds Express. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

We added a new member to the family yesterday a BCN Critical XXL Autoflower from SeedStockers in a 5 gallon with soil and perlite mix. He said he has been having a little trouble with temperatures being too cold but he has been figuring it out and he almost has it under control and it shows. They are all looking great. They are going to start flower soon. I think hes in for a treat. I am working on a flowering feed guide for him. He has been doing great with minimal nutrients so we will keep it that way.

This week went pretty well, other than she stretched like crazy and I am now getting worried about running out of vertical space. I also had a few of my bottom leaves get a few brown and yellow spots on them. I did post some pics and asked a question, thank you for the responses, much appreciated! I am thinking about adding my Spyder Farmer LED 100 Watt light into the tent for the nebula auto because it is about 23 inches shorter than the sour diesel. I believe it would only raise my temp about 2 degrees, and possibly lower the humidity by one or two percent. I must say my dehumidifier has been a freaking stud, running 24X7 and not complaining. I should look into adding another unit, it has been in the mid 90's and muggy for about a week. So far I have to say I am super impressed and excited with this setup, the genetics, and with growing this wonderful plant in general. Already planning ahead to my next grow, and what I can do better. I have been enjoying myself and I really appreciate everyone who has taken the time to answer my questions! I am having a blast and am excited to see what this lady will give up in a few weeks!