1st Week went very smooth without any problems. 2nd Week feeding only water until transplant day. Transplant Day 14

Super pungent, super fat, supergirl! She really is amazing. One of the buds got some sort of heat or light burn weeks ago which has resulted in the top changing shape. It's noticeably rounder and fatter than the rest. The wait is killing me with this girl. Can't wait for harvest. Till next week!

I had to transfer to the bigger pots the week. There was a lot of stretch in the cups and they were falling over. so will see how it goes this week. Coco with the Azomite and a little clone x myco powder at the root base, Just a baby feeding 1 mil/gal of the three part Emerald Harvest and Cal Mag in a 5 gallon bottle. PH at 6.1, then another 5 gallons of plain PH 6.2 water no food to get run off from the pots. The runoff was PH 5.8 so in happy with that. I got the time-lapse running so I will post it at the end of each week moving in to the next one. waiting on a green filter for the camera to help adjust the color so everything will not look blurpule. Cheers.

Still working away to fix the nute deficiency I came into just after new years. Dense buds are still forming and calyx swell is beginning on original internodes. The sweet smell is like a brick wall when opening the tent. Keeping humidity down by opening a port on the side of my tent and adding an extra fan works well. This has been a great learning grow for me. I'm amazed the number of tops this strain has been able to produce. Next time I will be using air pots or something similar.

It was a rough go for me becuase of the heat out here and i made some mistakes. I shop of taken the light controll and dimmer box out of my tent instead of leaving ontop of the light. The tent got way too hot during the days. I had a air cooler but that only brought down the temp by 10 to 15 degrees. The pine apple chunk was a fighter and stayed strong and ive got some decent nuggs out of it all! Tell next time fam

So these seedlings were in to hot of soil. I tried to remove the plant and put a nest egg of happy frog in between the hot soil. It has definitely helped but as you see the small seedling is struggling with the soil. I guess i didn't add enough happy frog. Well they are both growing and looking okay. Got a new light. The one grow mc2000. 200w full spectrum light. Love it. I have it set at 24in away and on about 50% power. Its between 200-300ppfd. Well stay tuned to see how these girls grow.

Nicole x OG Kush

🌱 Week 3: Mutant Magic—The Veggie Vibes Begin! 🌱 Hey Grow Fam! We’re officially cruising into Week 3 of veg with these Mentha de Croco mutants from @TerpyzGenetics, and WOW, they are stealing the show with their funky, unique traits. The diversity in their growth patterns, leaf shapes, and overall structure has me in awe every single day. It’s like watching a gallery of nature’s art come to life! 🌿✨ This week, I’m excited to share something extra special—a photo showcase capturing the magic up close, featuring some incredible macro shots of water drops and reflections. Plus, I’ve included a behind-the-scenes video to show you how these shots came to life, proving it’s all-natural and no digital effects! 🌟📸 Tent Life: Keeping It Steady This week’s conditions remain rock-solid, giving these beauties the stable environment they need to thrive: • Temperature: Holding steady to ensure smooth growth. • Humidity: Keeping it nice and high to encourage lush, healthy foliage. • Lighting: The Future of Grow (FOG) LED is still set at 200 PPFD, which is perfect for building strong, compact plants with tight node spacing. Consistency is the name of the game here, and it’s paying off beautifully. 🌟 Nutrition: Feeding the Funky Mutants 🌿 The feeding schedule this week continues with the amazing Aptus Holland organic-mineral lineup. Here’s the mix that’s keeping these plants healthy, happy, and thriving: • Regulator (0.15 ml/L): This is my go-to for fortifying cell walls and helping plants handle any environmental stress. It’s like a shield of armor for them! • CalMag Boost (0.25 ml/L): Calcium and magnesium are crucial for strong stems and vibrant, green growth—an absolute must for mutants showing off their unique structures. • All-in-One Liquid (1 ml/L): The backbone of the nutrition program, delivering a balanced diet of essential nutrients for steady, healthy development. • Start Booster (0.25 ml/L): Packed with root-stimulating microbes and nutrients, this ensures the root systems stay strong and can support the impressive foliage growth above. Why I Love Aptus Holland: This organic-mineral line perfectly blends nature and science. It’s clean, efficient, and gives the plants exactly what they need without overloading or causing buildup. The results? Happy, resilient plants that thrive from root to tip. 🌱✨ Growth Highlights: The Funk Unfolds! 🌿 Each plant is starting to show off its unique traits, and I couldn’t be more excited. Mutant genetics like these are a grower’s dream, bringing surprises and individuality with every leaf that unfolds. I’m noticing: • Leaf Diversity: Wide blades, funky asymmetry, and new textures emerging. • Steady Growth: Compact, strong plants with great structure—perfect for setting up the next stages of training and growth. This week, I also took some time to capture the magic of these plants through photography. Using my trusty Sony and Nikon cameras, I snapped some macro shots featuring stunning water drops with beautiful reflections. These photos really showcase the intricate beauty of nature that’s so easy to overlook. 📸 Behind the Scenes: To top it off, I’ve included a video showing how these photos came to life. No tricks, no effects—just a little patience, the right light, and the magic of macro photography. It’s my way of sharing not just the plants’ journey but also the creativity and wonder that comes with it. 🌟 Grower Reflections & Tips 💡 💚 Observation is Key: Take time to really “read” your plants. Each one is unique, and mutants often need a little extra attention to their quirks. 🌱 Embrace Creativity: Whether it’s training techniques, feeding strategies, or photography, let your passion shine through—it’s all part of the journey. 💧 Steady Feeds, Happy Plants: The balance of Aptus Holland nutrients is keeping these plants perfectly happy without overfeeding. Light but consistent wins the race in these early stages! Shoutouts & Grower’s Love 💚 A big thank you to: • @Terpyz Genetics for these incredible, unique seeds. • @Aptus Holland for the nutrition line that keeps these mutants thriving. • @Future of Grow for the perfect lighting setup. • @Trolmaster for the best controls in the market. • @Grow Diaries for providing a platform to share this journey with the grow fam. • And YOU—the amazing community that makes this all worthwhile. Whether you’re a follower, a fellow grower, or just stopping by, your energy means the world! Let’s keep celebrating these mutants and spreading positivity. Until next week… let’s grow, let’s grow, let’s grow! 🌱✨ Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Hi everyone :-) The hardcore LST was really worth it 2 weeks ago 😍👍. Now all shoots are exactly in the middle and far below, so that they will work again for the next 30 days in the stay growth 😃. I am very excited to see what bushes will emerge 😊. I wish you all a nice weekend, stay healthy 🙏🏻 and let it grow 😎👍 Strain Blue gelato 41 clone from mother (Barney's Farm) ☝️ Genetics: Blueberry x Thin Mint Girl Scout Cookies x Sunset Sherbert 👍 Vega lamp: 2 x Todogrow LED Quantum board 100 W. 💡 Flower lamp: 2 x Todogrow LED Cxb 3590 COB 3500 K 205 W. 💡 ☝️ earth: Canna Terra Professional + ☝️ Fertilizer: Canna Terra Vega, Canna Terra Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Flores ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧

Aprendiendo cada día mas

Nothing going on just another week girls are growing nicely despite my continuous struggle with humidity. I’ve put to much money in so far I should have bought something to help combat my humidity problem but opted for a new led grow light which I’ll leave details for below it arrives Tuesday and I will immediately Install. VIPARSPECTRA Dimmable Series PAR1200 1200W LED Grow Light - 2 Dimmers 12-Band Full Spectrum for Indoor Plants Veg/Bloom https://www.amazon.com/dp/B01N7CEW5Q/ref=cm_sw_r_cp_api_i_i59SCbMBTACN9

3rd week of Flowering is over and the stretching stopped. She received a big defoliation and bottom half is lollipoped. She just enjoys life and keeps growing her buds. Frosting slightly started.

Trying out LST, I broke off 2 of her stems..🙁. I seem to have her contorted too, smells great tho'! I added some Bud Explosion now that she is in flower. Also added another autocob. Happy Growing!

Week 5 Another week full of lots of new growth. I am up to four tops now so it’s just a matter of waiting a little longer and I will be up to the magic number 8. I really like the open structure of this plant. She seems perky and very healthy up to now. Cooler internals: 6.2 pH 0.4 EC 65 F solution temp. Onward 😎🍻

• OCTOBER 3 ― 5 : 00 AM THE SEED WERE SOAKED IN " B I O R A G ". ( WHERE IT SPENT ABOUT 16 HOURS. ) • OCTOBER 3 ― 9 : 00 PM TRANSFER TO A COTTON PAD. • OCTOBER 5 ― 11 : 00 PM PLANTED IN THE SOIL. ✎ I USED DISTILLED WATER AND 3 MILLIGRAMS OF BIORAG FOR GERMINATION. ( 1 MILLIGRAM PER 100 GRAMS OF WOTER. 300 GRAMS IN TOTAL. ) TDC / PPM ― 7 " ბიორაგი • BIORAG " FACEBOOK ― https://www.facebook.com/bioorganicrevolution/ BLOG ― http://rgakhokidze.blogspot.com/p/blog-page.html/

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

✂️ Harvest – Flowering Week 12 | Day 78 (17 weeks total) Harvest day for the Future #1 plants. Both plants were cut after a total runtime of 17 weeks from germination. ⚖️ Wet Weight Future #1 #1: 1135 g Future #1 #2: 1150 g Both plants delivered strong yields, with only minor variation between the two. 🌿 Overall Impression Visually, the result is very solid. The buds are dense, well-formed, and show a good level of resin production. The run remained stable through to harvest, with no major issues affecting the final outcome. All material is now hanging to dry, with final results to be evaluated after trimming and dry weight assessment. A long run overall, but a consistent and worthwhile finish. 🌿💪

Flush is on! A gallon a day each of pH’ed tap water for the next week and a half to 2 weeks. Fall colors galore incoming! One is already going mad purple as I started it on the flush a bit earlier.

Very tasty dense buds good high tastes judt like strawberry