This plant was a dream to grow, wish I'd taken cuts. Halfway through dry at 7 days. Drying at 55 - 60 % RH and 17 - 19 degrees C. I anticipate she'll be done between 10 - 14 days total dry time and I'll then trim and update weights on this Harvest. 133.75g total after trim. She's a nice smoke, very happy.

These girls are blowing up and have filled the 3x3 tent no problem.They are in 3 gal fabric pots so I’m hoping to keep them short as possible with scrog net along with some training and defoliation this week.I can see this grow producing lots of buds and I’m debating on adding a second sf1000 to the tent to give them another 100 watts.

These were all pretty Uniform in height and weight even with #3 being replanted 2 weeks in, lots of Haze smell diesel and pungent on the front end and some sweet at the tail, I should of let these go a few more weeks I think it would be better. I have read and have heard that the flowering time the breeders recommend is based on a 1000w set up. and light plays an important roll in yield as far as flowering goes Its all about time. and maybe next time I will grow these to a more perfect pant. but this round as a grower I give myself a 6 out of 10 got some buds to some and turned the trim and larf to hash, not a huge return and the Trichomes were mainly in the 25 micron range with a minimal amount in the 76 micron bag. so My thinking is that these were all small and under developed trichomes, this leans into my theory that they could have gone another 3 or for weeks, Failure has been my greatest teacher and I really enjoy this hobby. Next grow will be an Organic Dry Amendment Auto Flower with new lights no more Blurple import lights. I got my 1st vaccine shot. hope you all are staying safe and lifted. BDH#1 13 oz wet 42gm buds 30gm larffy trim BDH#2 13 oz wet 26gm buds 42gm larffy trim BDH#3 13oz wet 20gm buds 42gm larffy trim TOTAL 39oz wet TOTAL 94 gm buds 97gm larffy buds

420Fastbuds FBT2306 Week 9 What up everyone. Weekly update on these two show stoppers and all I can say is 👌. They both are showing some really crazy colors and buds are nice and dense covered in trichs. I checked them under magnification and trichs are still clear and cloudy and I'm shooting for an 80/20 split of cloudy to amber. No major issues besides some fading in the leafs but that's expected at this point in flower. Guessing maybe another week or two before the chop. All in all Happy Growing.

Another week closer to harvest! She’s looking and smelling amazing!! I can’t wait to smoke this delicious plant. I’m out of plant yo-yos!

This was another hot, hot week with a big rainstorm. Take a look at the measuring cup, it is full of rainwater. Zamnesia Mango Kush continues to smell and is very sticky. It is tall and with packed buds It should be ready to take down in a couple of weeks. Half way through this grow, I had to stop using Miracle Grow and change my grow plan. I decide to use Advance Nutrients Jungle Juice for the rest of the grow. Jungle Juice’s selling point is that it is the only nutrient that I should need during the entire grow. One just need to make the solution stronger as the plant matures. The directions say to “stir vigorously” and that is true. It is very clumpy and I had to stir and shake the bottle a lot. As your plant is in veg and growing larger, directions say to up your Jungle Juice to 4 ml per liter. If my calculations are correct, I am using approx. 5 tablespoons per 5 gallon bucket. 1 gal is 3.78 liters 5 gallons=18.92 liters 4ml jungle juice per liter x 18.92 liters= 75.7 ml which is = to 5.119 tablespoons per 5 gallon bucket of water As the end of the summer is quickly approaching, I have spent some time reflecting this week on all of the contests that I have entered and not won this summer. It can be a little frustrating because of all the time I have spent taking pictures and writing commentary. But, instead of it getting me down, I have to think about all of the positive take aways and I want to share them on this platform. I have read a lot of diaries and now know why I am just an apprentice. I have a lot to learn from all of you. There are some really good growers with a lot of experience and crazy grow techniques. So much knowledge is on this platform-it’s mind boggling. To be a great grower, you must be willing to be vulnerable and put yourself out there and try different suggestions and new techniques. I have made a few friend that I enjoy chatting with. I enjoy reading comments versus just seeing likes. My best friend on grow diaries is @Natrona and my neighbor as well. She has been growing longer than I have been so I routinely learn from her. This summer I learned to mix 1 cup of Perlite into my soil. I can see where my plants need the air flow. And, I now I only defoliate fan leaves that absolutely need to be gone. I let the fan leaves stay on until they fall off. I want my buds to pull all the nutrients they can out of the fan leaves. I also bought 2 new tools that @natrona suggested. The first was a water PH tester and the second was my Max-ee Magnifier which is informative and fun to use. As always, Let’s Chat it up AND Likes and comments are appreciated

Como mencionaba en el 1er video por intensas lluvias y vientos, la planta más grande se ha partido, intente "repararlo" pero será cuestión de días para ver si ha sobrevivido o no. Por las dudas he regado( a pesar de la lluvia) 1ml x litro de agua. La cantidad de la misma fue de 3litros con flora booster.

Buenas en esta la primera semana desde su germinación las vemos estupendamente, hemos pasado a abonar desde la primera semana con Power rotts para empezar hacer un sistema radicular muy bueno

This week was with sunny days. She was flowering so slowly in this winter here in southamerica...

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

Still struggling with humidity but the plant seems to be doing ok! It’s gotten lots more bushy and is starting to grow up the way a bit more which is promising. I dropped the root juice as of yesterday and trimmed down the nutrient dosage as I looked at the bio bizz feeding schedule for my soil (which is all in one) and I was slightly over doing it with the nutes. I’ve raised the lamp up on the bucket as I was afraid of lamp burn on the leaves and this has dropped the temperature inside the bucket to about 22 degrees. I’m always open for feedback since this is my first grow. Thanks guys

She's really starting to get purple and intensify in smell now 🍃 have yet to have any huge issues with plants as long as you keep it simple and correct at first signs of stress. I really like the jam like smells atm. Hope when she's done the smoke is just as good. Just a few more weeks. Happy growing 🌴

Día 75 y último de vida para esta hermosa nena. Me encuentro disfrutando de la manicura y hermosa cosecha que estoy obteniendo con esta planta, mi casa está impregnada por una fragancia dulce con toques tangie. Ahora cortaré por ramas y colgaré en la carpa de cultivo donde se secará por aproximadamente 10 días con humedad y temperatura controlada. Esperaré a curar y probar bien todos esos terps para poder dar un buen informe de cosecha pero hasta ahora todo se ve muy bien! Buenos Humos 👽

Starting my second run with a frost banger auto from fastbuds420

I loved! It is an amazing flavor and effect. i feel so high right now 😆00

The Purple Lemonade from fast buds is looking amazing with her purple trichrome covered buds she has been thriving under the medic grow fold 6 an loving the cronk nutrients witch is no surprise because cronk nutrients has always worked amazing for my autoflower grows can't wait for this one to be done as it smells like sweet candy

03/12 - Day 68 Girls are putting out some really nice aromas! I’m assuming this is the last push for this strain, buds are really tight and super hard when squeezed on (B) & (C) All around the trichomes are still pretty clear and no amber yet.

The progression of the week has been rather satisfactory with the majority of the seeds germinating promptly and exhibiting robust health. My principal investigative interest for this growth cycle centers on the Epsilon F1 variant. My endeavor is to gauge the yield precisely while concurrently aiming to expedite its flowering period to the maximum possible extent. I will employ hydroponic methods, striving to minimize energy consumption in the process. The overarching ambition here is the production of high-caliber, sustainable cannabis.

Day 99 dealing with annoying humidity issues seeing some damage on the leaves i think becuz of the humidity issue i got it all foxed up now an they look happier so hopefully i can maintain that the alien is showing no signs yet so shes really resistant to what ever it is so thats good Day 100 getting dialed back in im hoping iv fixed the problems Day 101 seems every plant is mostly happy but the qc blast still figuring out mayb a root problem Day102 trying a flush with hygro products the qc blast is still dealing with problems hopefully this will fix it everything else seems to be doing better Day 104 i think the flush fixed it 105 trics colors and smells coming in 🙌