Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

13/04/2026 Midday Upped Redox therapy to 3 drops every 2 days with 3ml of hydrogen peroxide 17/04/2026 18/04/2026 Bubblegum Miniature is showing aging of dark purples!

Today is the start of week 8. Very nervous about the harvest so im checking it with a microscope daily. Any tips or suggestions appreciated!

Day 42 Just trying to pull through till harvest. Got a couple more weeks to go.

01/17/22 Everything's starting to grow again from the LST and defoliation at the end of this week flipping to flower. Tested run off last watering it was 2250ppm, did straight water this watering. *Note plant 4 has had hiccups from the start when it popped out of its seed it's tap root was curled I fixed it with tweezers by pulling the skin off and then placed it into the Coco, it shows the most stress out of the 4 plants and does not respond well to anything I do to it, even with 2250 ppm runoff it's still showing signs of a nitrogen dificiency PH in run off at 6.0 so not sure why it's so finicky . It did get the worse light burn out of the 4 , me being a novice at this I'm not sure if early stress ruins the rest of the grow but I'm starting to think it does from past grows and this one. 01/23/22 Just watered plants , the lockout has been fixed that one plants not eating as much as the other three and due to future harvests suggested mixing was way to high 1200-1300 ppm I had to mix by there measurements then weaken it with water till I reached 800ppm. Thank you everyone who post info for me.

Day 74 and there getting chopped today! I thought the harvest was going to be broken into two separate weeks considering the times on the Choco was listed about 7-10 days sooner then the DD (wich was listed at 70 days for flowering) However looking at the tricombs on the Chocolate Marshmallow most pheno didnt start getting amber untill the DDs did as well! A couple DD pheno could have maybe gone a couple more days but we will see! Going for reveg on all the pheno, since i didnt get to take any clones. We will see how it goes!

She is so freaking happy and happy mathematic is crazy

On day 29 I’ve increased the amount of Connoisseur Grow A+B given, from 0.5ml/L to 2ml/L, and the same with B-52, in 1L of water. No more Voodoo Juice as well. On day 29 I’ve also done some more LST on the same branches. I’m happy about the results. She’s gonna be a beast, although the pot capacity is just 5L. On day 31 I’ve increased nutrients from 2ml/L to 4ml/L (Connoisseur Grow A+B), B-52 not touched (again 2ml/L), and put them in 1.5L of water. On day 32 I did the third session of LST on various branches.

Masive yield as always The heatwave was insane

all was ok in this stage, using an automatic temperature regulator made by myself

Moved them both back indoors into the tiny tent under the Viparspectras..set timer to go 12/12.. I really need these bitches to flower...seems a lot like they were mislabeled... Finally....2 months in and pistils are popping after a few days of 12/12.... #notautosafterall 👉 Check out these new XS1000 lights on Amazon: https://amzn.to/3ttb2j9 👉 Get 10% OFF using this coupon code: lt10gdvip

Week 15 for Gelato 41 by seedstockers She got a MASSIVE defoliation... session done to her. She looks a little naked as of now but she will bounce back nicely by next week😇 She really needed it, it was so bushy before you couldn't even put your arm into the plant to figure out what was what😂 Oddly enough 30% of the plant seems to be in pre-flower when the rest doesn't... She does get shaded the quickest in the garden but wouldn't expect her to be flowering already... Still hasn't been watered since the rain last week but i may have to give water once this week as we have 40+ degrees incoming 😰

Ultima semana de crecimiento en la que seguimos sin aplicar ningún fertilizante y hemos ido reduciendo las horas ya mañana la dejamos en 12/12 y cambiamos a periodo de floración. Saludos y buenos humos!

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Was the last VEG weeks, was very easy, now can't wait to see the stretch, and hope to have enough space in the tent 😁😅 💪 The canope start to be great 🌲🌲 Defoliation each week, Removed some buds site under the canope. 🕑 Started to remove 2 hours per day, to reach 12/12 in 2 days 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Grow + Zym + Sugar Royal (1 + 5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 43% 40 cm. Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

All transplanted to new one gallon containers. Gonna flower soon in these. Topped and LST on bottom branches Topped again on upper branches —-Switched to 12/12 on oct 22—- Training some more day 2 of flower

Week 16 (Harvest) 30-1 First day of darkness. Temperature: 27.9 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 48% (lowest) 31-1 Second day of darkness. Temperature: 24.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 65% (highest) 50% (lowest) 1-2 Drying day 1 The Saparot is ready to be harvested! Before chopping her down, i took a lot of pictures. I was able to remove most of the soil to see the rootball. I hang plant as a whole to have a slow dry. The exhaust fan is on setting 4. 2-2 Drying day 2 Temperature: 19.1 to 17.5 degrees Humidity: 62% to 57% I changed the exhaust fan to setting 2 because setting 4 was a bit high in my opinion. 3-2 Drying day 3 Temperature: 19.9 to 18 degrees Humidity: 62% to 59% I changed the exhaust fan to setting 1, as someone told me that it was enough air movement for drying. 4-2 Drying day 4 Temperature: 19.8 to 18.5 degrees Humidity: 62% to 59% 5-2 Drying day 5 Temperature: 19.9 to 18.8 degrees Humidity: 62% to 59% Today i checked on the drying plants and the buds are shrinking a bit, they are getting a little bit crispy on the outside aswell, I hope they wont dry as fast, and i aim for a 12/14 day dry. Cant find the temps for 6-2 to 2-13. I do have a video when she was at the half of the dry process. 14-2 Trim day, yay! She was easy to trim, the buds are nice and dense, and there was not a too high bud/leaf ratio! She dried for 14 days. End results: Dried buds: 81 Grams. Dried Trim: 18.5 Grams. I am really surprised how good these genetics are! If you like CBD, i really suggest trying JYM Seeds out! The Saparot smells very fruity almost like a fruity coctail. The buds are super dense, and very bag appealing. After some months of curing the sweet fruity smell changed to a more sour smell, but still smells amazing! To be honest, i cured her a bit poorly, burped too less, and because the buds are so compact she holds moisture better then normal, so she tastes harsh, but thats on me. I have a pack of JYM's Sour Fruit aswell, so i will for sure try it out again! And my hope is already very high :D Thanks for following my diary, and feel free to check my others out aswell! See you at the next one!