Likes
Comments
Share
Hey fellow green thumbs! 🌿💚 It’s harvest time for our Auto Fat Pete’s Cookies from Super Sativa Seed Club! After an exciting journey, we’re thrilled to share the details of this unique plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our Auto Fat Pete’s Cookies was harvested yesterday. While the flowers turned out less dense than expected, the amazing smell has us super curious about the final product. 🌿🌸 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Fat Pete’s Cookies: • Bud Structure: The buds are not as dense as we’d hoped, but they are still sticky and resinous, showcasing a beautiful array of green hues with hints of purple and orange pistils. • Aroma: The aroma is incredibly strong and delightful, filling the grow room with a sweet, cookie-like scent that hints at the strain’s name. 🌿🍪 • Trichomes: A generous layer of trichomes covers the buds, promising a flavorful and aromatic final product. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Fat Pete’s Cookies: • Characteristics: Known for its sweet and cookie-like aroma, this strain has shown remarkable aromatic qualities throughout the grow. Despite the less dense flowers, the strong scent and generous trichome coverage promise a high-quality final product. • Harvest Expectations: Sweet, aromatic buds with a rich flavor profile. The slower drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ The aroma of a cannabis plant can be a strong indicator of its final flavor profile. Strains like Auto Fat Pete’s Cookies, with their unique and strong scents, often translate these aromas into delicious, flavorful buds. For a detailed grow guide and to see this strain in action, head over to my YouTube channel! 🎥✨ I share tips, tricks, and in-depth reviews to help you get the best results from your grow. This week’s harvest has been particularly intriguing, and I’ll be explaining the reasons behind the less dense flowers in detail. 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Fat Pete’s Cookies at Day 75 has been an interesting and rewarding experience. While the buds are not as dense as we hoped, the strong aroma and generous trichome coverage give us high hopes for the final product. With the plant now drying, we’re eagerly awaiting the final outcome. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a sweet and aromatic harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #FatPetesCookies #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT7-DOGDOCTROSO 17% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off
Likes
Comments
Share
Likes
39
Share
@valiotoro
Follow
Hello everyone 😎 A wonderful genetic thank you Dutch ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 134g !! For the light i’ve used the Mars Hydro FC-E6500💡
Processing
Likes
26
Share
@DrRobeRt
Follow
Great week -Colas are getting stronger and more white hairs are coming through now. Wendy is definitely getting ready to pop. Nancy has a cola that has exploded outward - prob chasing the light, may have been too high. Have put the light Very close not, about 5" away. I can hold my hand there so I'm sure they will be fine. I installed the scrog net and spending time each day moving the leaves back and getting those colas in the light. Any advice? Should I trim the leaves at the bottom now - there is a fair bit and i have to move them aside to feed? ;-)
Likes
8
Share
Great news they all have names! Please welcome Samantha, Ana, Nerea, Lucia and Ella to the group! So it has been a week of playing around with free-standing water, heating, and airflow and now it seems we have finally found the sweet spot with a humidifier up high. It seems like I don't even need the extraction fan at the moment as there is a reasonable amount of pull coming out of the hole at the top, so much so that the door is actually being sucked in. Just trying to find the right height for the light. After a bit of research, I have decided on 80cm which I will lower bit by bit each day heading towards 50cm. Any comments would be greatly appreciated. 🙏💪 Also in my search, I found that according to Jorge Cervantes 24 hour light is a waste of electricity for the extra growth you get so I have reduced the schedule to 18-6.
Likes
96
Share
We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds and I was super happy with her the more she went into flower the more the frost would build up , and that's when the terps came out and they came out strong , Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈 Amazing 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the FC4800 www.marshydro.ca Big thanks to Agrogardens for there Nutrients www.agrogardens.com
Likes
8
Share
Dünger leicht erhöht, pH bei 6,5 Nachttemperatur abgesenkt, sodass sie leicht anfängt zu purplen. Zwischendurch immer mal paar Blätter entfernen, die den Lichteinfall behindern. Sieht soweit alles in Ordnung aus Lampe ballert auf 100% und 40cm Abstand
Likes
3
Share
@PapaTerps
Follow
Zhampagne - Compound Genetics Day 93 🚿 She was watered twice this week, with 3L of RO tap water pH'd to 6.5. She has begun her flushing stage and is now only receiving plain water, she is currently drying back and will be harvested in the next few days! ✂️ No work on her this week, she isn't very bushy and she is nearing the end of her lifecycle, so the next time she will see my scissors will be harvest day 🙌🏻 🌸 She has big dence flower that bulked up so quick and has now spent the last couple of weeks maturing! The majority of her trichomes have turned milky clear, but some of her pistils have yet to fully mature - I think she will be ready for harvest this week, but I will wait until she has fully matured before I cut her down 👍🏻
Likes
19
Share
@Coopmc
Follow
Clone for harvest next week!!
Likes
6
Share
@IamCy
Follow
Rolling into week 7. Time to dial down the nutes and start my UVB regiment. I use Reptisun 10.0 bulbs due to LED UV's giving far less than optimal performance. Reptisun 5.0 bulbs work 2. I only run them from week 7 to flush and for only 3 hours a day within the current light cycle. Update day 45: After doing a trichome check, it finished EARLY!! Time to do a quick flush then harvest. I was going to add the nutes to the fresh water today 😂😂
Likes
2
Share
@ChiTaN
Follow
Let's start another week😊The girls are doing great ! They received a single dose of Final Solution and Organic Bloom Stimulator.White Widow X Big Bud has started to give off a very intense aroma.Due to the density in the tent, it was necessary to install an additional fan.Looking at the progress, I expect a harvest sooner than declared.
Likes
1
Share
@burnout
Follow
Caterpillars and storms destroyed these buds, probably got an ounce of each plant. Let it dry for two weeks, froze and pressed flower rosin. Rosin has a very strong fruity flavor, gets me high for about an hour, cut too soon
Likes
9
Share
Follow me to watch more divine seed auto flowers grow
Likes
14
Share
@Ashbash
Follow
I think I over watered this one badly this week. All droopy. Hopefully it will recover but some of the leaves are starting to get patchy so I think there is another issue forming. I believe now that it is a pH issue so I have a test pen arriving soon and I will update with results. Tested pH and it looks good at 6.9 so I'm gonna increase bloom nutes cos it could be phosphorus or magnesium.
Likes
9
Share
Para ser la primera vez que cultivo no puedo quejarme, pero si alguien me pudiese ayudar
Likes
20
Share
Que pasa familia, actualizamos la semana de la farm cheese, la trasplantamos a su maceta definitiva, utilizamos sustrato Plagron. Ph controlado en 6,5 humedad algo baja pero pronto pasaremos a floración, temperatura ideal, el led hace si función y aparte no da calor. Los nutrientes los seguimos echando en dosis muy bajas para que no sobre fertilize. Hasta la semana que viene fumetillas.
Likes
1
Share
Beginning of week.. As I watered this morning (no nutes at 111 PPM), the runoff came out at 830 PPM.. so the plant may not be taking up as much nutes? Idk.. possibly.. but since I'm so close, I've decided to just cut the nutes in half while completely removing CalMag and Hydroguard.. they shouldn't be doing much at this point anyway.. temps were a little cooler the last couple weeks (not so much this week) so it's helping purples come out! Wish I could get it even cooler.. but the flush should help her reveal beauty!.. she's already so gorgeous, to me 😍 Mid week.. She is absolutely stunning! So the last time I fed, the runoff TDS was coming out less than it was going in.. 700 PPM, good deal.. but when I watered the next time, the runoff TDS came out 200 PPm more.. like 900 PPM.. so I watered the next day and it came out 800 PPM.. so today I watered with FloraKleen and it came ou 700 PPM.. the days I watered was only 80 - 100 PPM going in.. no reason for the runoff to have jumped up like that out of nowhere.. I haven't been rinsing off the saucer as I should have been (daily).. just pulling the runoff out as soon as I can.. maybe it is just built up on the saucer?? Idk.. I guess I should attempt to pull it out and rinse it at least once or twice a week.. other than that, she is still turning purple ALL OVER more and more each day! Beautiful smell.. sweet, citrus, slightly skunky.. not overwhelmingly skunky.. but she isn't too far off.. so, I was thinking I will just keep watering till harvest.. not flushing the medium in one watering.. just normal amount of watering with a normal amount of runoff and she can use up what's left in the medium for this week, then the 2 week flush (still just watering normal amounts daily) will begin.. not this week even tho I'm not giving any nutes, due to a salt build-up going on somewhere in the rootzone.. but we shall see! End of week.. Wow she is getting close! So dank! So fruity! Definitely got the skunky phenotype but not lacking on the berries, whatsoever. Seeing many cloudy trichomes.. still a few clear but the way she is maturing, I believe she will be ready in just another 1 week, 2 if I'm feeling patient (probably not). This week was literally nothing but water. Wait, I did do one dose of FloaKleen due to the salt build-up about mid week.. never used anything else this entire week.. so this week was just a slow flush.. will have an update on the runoff tomo (beginning of next week) with more pics! On to the next...
Likes
15
Share
@Chubbs
Follow
What up fam, weekly update on these lovely ladies. I put the scrog net out this week for support and am I glad I did. Only after a couple days they grew right through it. The greenhouse is 6'5 feet tall and they're pushing 5'6. I'll go in there and take off some of the lower fan leafs at the bottom but not to much defoliation needed. I'm seeing preflowers so I'll also switch the nutes from grow to bloom. All in all Happy
Processing
Likes
21
Share
This is week 2 from our of the humidity dome by the way (more details to come in the week 1 diary). In week 2 these girls are looking very good! Very nice color overall and nice growth. The clones clones I cut before switching mom to flower are taller, but the ones I cut after switching to flower are bushier. There are 7 clones of Cherry by Elevator Supply Co, these are a High CBD Hemp plant that I am growing and will continue to grow for producing CBD products. I am also a licensed Hemp Farmer. Then I have a clone of DinaMed CBD+ from DinaFem and 2 DinaMed CBD+ seedlings. Next, I have 3 clones of Cream & Cheese CBD from Seedsman and 1 clone of Critical+ from DinaFem. Last I have 2 CBD Medi Kush from Spliff Seeds. I have a separate diary for the CBD Medi Kush from Spliff Seeds, check it out 👍 I don't plan on feeding anything for a while and let the plants use up the nutrients in the soil. In the video, the babies are featured starting at the 3:15 mark